TRILUX IS 500 ceiling supply system

NJ700 LED pour une pose en saillie au plafond ou un montage en suspension | with double reflector of aluminium; distribution intensive ou extensive | avec un ballast électronique DALI*; with mounted 5-pole connection plug and enclosed socket | LED module support with cooling ribs and electrics module of diecast aluminium, mounting bracket of steel; toutes les pièces sont peintes en fer micacé Siteco® (DB 702S); lateral support profiles of extruded aluminium, anodised; cache en verre de sécurité

A mobile warmer/bassinet consisting of a radiant warmer with proportional controller and an integral bassinet/procedure table. Also includes a warm weigh scale and phototherapy capabilities. All four sides of the bassinet fold out of the way for access to the infant. Bassinet bed can be tilted. Bassinet cabinet has storage drawers. Unit has shelving above bassinet to accommodate monitoring and resuscitation equipment. The entire unit is mounted on conductive casters, two with locking brakes. Designed for use in the neonatal intensive care unit, nursery, delivery room and special birthing units.

Mobile/transportable intensive care infant incubator. Unit consists of a closed controlled environment in a clear plastic hood for direct observation. Equipped with access ports, doors, heating and humidification systems, temperature and oxygen controllers, physiological monitoring system and a mattress. Used in the intensive care unit or for helicopter, airplane and ground ambulance movement of critically ill neonates. The services have approved different models and manufacturers. Verify airframe compatibility with Army Aeromedical Research Laboratory at Ft. Rucker or the US Air Force Armstrong Laboratory (AFMC) before purchasing.

High frequency infant ventilator. Automatic unit consists of a breathing circuit, controls, monitors, and alarms. The system has several operating modes depending on the specific configuration. The unit assists and regulates the patient's breathing. For use in the intensive care nursery to initiate respiration when changes in the breathing condition of an infant occur.

High frequency adult ventilator. Automatic unit consists of a breathing circuit, controls, monitors, and alarms. The system has several operating modes depending on the specific use and configuration. The unit assists and regulates the patient's breathing. For use in intensive care to initiate respiration when changes in the patient's breathing condition occur.

Arran’s natural, almost ‘artisan’ appearance belies the complexity of its multi-height textured loop pile design and the state of the art manufacturing technology behind it. Using CMC Infinity machinery Forbo’s designers have developed a carpet tile with unashamedly irregular peaks and furrows which broadlooms beautifully to deliver an alluringly tactile linear design offering real warmth. Arran is offered in a broad range of 18 colourways comprising natural and more vibrant tones to complement today’s most contemporary interior environments. Each tile features a carefully blended duo of yarns, 100% solution dyed to ensure the subtle colour contrasts are maintained throughout the lifespan of the flooring, even in the most demanding environments subjected to intensive cleaning regimes.

Horizontal wall protection against intensive wheeled traffic for corridors, access and storage areasHorizontal wall protection against intensive wheeled traffic for corridors, access and storage areas[LIST] Perfect alliance between impact resistance and design Minimised projection thanks to ist narrow bevelled end pieces Optimal hygiene thank to the the wall-hugging and the reduced retention surfaces due to the reinforced lips Easy installation on aluminium clip or option on aluminium rail Perfect alliance between impact resistance and design Minimised projection thanks to ist narrow bevelled end pieces Optimal hygiene thank to the the wall-hugging and the reduced retention surfaces due to the reinforced lips Easy installation on aluminium clip or option on aluminium rail[/LIST]

3 heights available - Easy cleaning - Heavy traffic Wall - Wall protection Horizontal wall protection against intensive wheeled traffic for corridors, kitchen and logistic areas [LIST] Impact resistance due to optimal PVC thickness 3 mm Impact energy dissipated through 4 internal ribbing reinforcements Quick installation with end cap serving as first clip Easy cleaning due to rounded design and smooth surface[/LIST]

3 heights available - Easy cleaning - Heavy traffic Wall - Wall protection Horizontal wall protection against intensive wheeled traffic for corridors, kitchen and logistic areas [LIST] Impact resistance due to optimal PVC thickness 3 mm Impact energy dissipated through 4 internal ribbing reinforcements Quick installation with end cap serving as first clip Easy cleaning due to rounded design and smooth surface[/LIST]

3 heights available - Easy cleaning - Heavy traffic Wall - Wall protection Horizontal wall protection against intensive wheeled traffic for corridors, kitchen and logistic areas [LIST] Impact resistance due to optimal PVC thickness 3 mm Impact energy dissipated through 4 internal ribbing reinforcements Quick installation with end cap serving as first clip Easy cleaning due to rounded design and smooth surface[/LIST]

The DYNACO D-501 COMPACT high speed roll up door is a medium sized interior door for intensive use. With its fast cycle, it enables smooth flows of goods, materials, vehicles and personnel. Advanced push-pull drive technology opens and closes the interior roll up door with high speed. Free of rigid elements in the curtain, this interior high speed door is safe for your staff and equipment. Even when dislodged accidentally, it is sufficient to open and close the DYNACO D-501 COMPACT interior roll up door once in order to re-insert the flexible door curtain into its side guides. Business continuity can be assured and production down-time avoided. With very few wearing parts, the DYNACO D-501 COMPACT is maintenance friendly. This tightly sealed high speed roll up door enables significant energy savings and provides a good protection against dust, dirt, humidity and draught.

With dimensions up to 9 m wide and 5,5 m high the DYNACO M3 POWER high speed door is a perfect large sized high speed door for outside use. It is wind resistant up to class 3 according to the European standard EN 12424. Its superior tight seal and fast door cycle allow for significant energy savings. Wind and bad weather are excluded from your building, keeping your infrastructure and goods well protected. Intended for intensive use, the DYNACO M3 Power high speed roll up door allows intensive inbound and outbound traffic in your industrial building, warehouse or hangar. This helps to optimize material handling, traffic flows and transport activities. With a curtain free of rigid elements, the DYNACO M3 POWER roll up door is safe for your staff and equipment. When accidentally dislodged, the door curtain reinserts itself into the side guides after an open and close cycle. This avoids production down-time.

Install DYNACO M2 EMERGENCY flexible roll up doors in your industrial building and comply with safety regulations. Designed for intensive traffic flows, this high speed roll up door also offers an emergency exit. The flexible PVC door curtain of this emergency high speed roll up door has an ingenious T-shaped cut in the middle. When a person pushes on the indicated release spots the curtain splits into two symmetric flaps and the emergency exit opens. Once opened, the flaps of the emergency exit can easily be joined together again with a large zipper. It only takes a few minutes to make the flexible high speed roll up door fully operational again. The unique push-pull technology and a limited number of wearing parts keep maintenance requirements low. The self-reinserting flexible door curtain minimizes down-time of the high speed door in case of an accidental collision.

Ditec Cross 30 is a rugged, powerful gate opener suitable for gates up to 3000 kg heavy and 20 m wide. It's the ideal solution for automatic gates for intensive service (community and industrial entrances) and feature easy and trouble-free installation. Ditec Cross30E is equipped with built-in electronic control panel, magnetic limit switches and the whole system is housed in a robust steel cabinet. The internal components and Control Unit are in easy reach through the large front removable cover. The gate opener can be complemented with the wide range of Ditec command, control and safety devices. Ditec Cross fully complies with European Directives.

The PYROPLUS door sets from DOORTAL have been designed to suit both public and private buildings, where they will stand the test of time and intensive use. They represent the highest standard for mechanical resistance with 1.5 mm thick steel, a strong sectional frame and steel hinges with stainless steel ball bearings. The “10 year warranty” label is a proof of DOORTAL’s commitment to quality. These door sets have EI 30 and EI 60 ratings (integrity and insulation). They can also be acoustic rated (40 and 50 dB) and thermal rated (U value from 1.7 to 1.4 W/m².K). Made of galvanized steel, PYROPLUS door sets are protected from rust with weather seals fixed on all four sides in order to be completely watertight. They are suitable for interior or exterior use. The PYROPLUS 30 and 60 door sets have been laboratory tested with varying door equipment: standard locks, 3 point, panic bars, electric locks for access control, door closers, vision panels etc. This opens up a wide range of fire resistant choices to suit premises open to the public, whatever functions are required. To save time on site, DOORTAL uses the “Chronofix” concept which consists of fitting all the furniture in our factory. The installer receives his custom size or standard size door set 100% ready-to-fix.

The PYROPLUS door sets from DOORTAL have been designed to suit both public and private buildings, where they will stand the test of time and intensive use. They represent the highest standard for mechanical resistance with 1.5 mm thick steel, a strong sectional frame and steel hinges with stainless steel ball bearings. The “10 year warranty” label is a proof of DOORTAL’s commitment to quality. These door sets have EI 30 and EI 60 ratings (integrity and insulation). They can also be acoustic rated (40 and 50 dB) and thermal rated (U value from 1.7 to 1.4 W/m².K). Made of galvanized steel, PYROPLUS door sets are protected from rust with weather seals fixed on all four sides in order to be completely watertight. They are suitable for interior or exterior use. The PYROPLUS 30 and 60 door sets have been laboratory tested with varying door equipment: standard locks, 3 point, panic bars, electric locks for access control, door closers, vision panels etc. This opens up a wide range of fire resistant choices to suit premises open to the public, whatever functions are required. To save time on site, DOORTAL uses the “Chronofix” concept which consists of fitting all the furniture in our factory. The installer receives his custom size or standard size door set 100% ready-to-fix.

SOPRANATURE® is a green roofing sytem for terrace roof on steeldeck, wood or concret support. It combine one vegetalisation system and a reinforced root barrier bilayer waterproofing system from the SOPREMIUM range of SOPREMA group. Available in extensible, semi-intensive and intensive (gardent), SOPRANATURE® adapts to each project, each climate and every type of building, in new or in rehabilitation.

[LIST] Specifically designed for use in pressurised healthcare environments where differential air pressure is required to prevent infection spreading eg. surgeries, recovery rooms, intensive care, etc. (compliant with HBN 00-10, TDM 4032:0.6 and HTM 60). For use in operating theatres, seek client approval. Does not contribute to the growth of MRSA, low particle emission (ISO Class 3) and can be effectively disinfected with standard detergents and steam cleaning. Highest fire safety (Class A1), good sound absorption (Class B) plus non-hygroscopic and dimensionally stable even at humidity levels of up to 100% RH. [/LIST]

[LIST] Specifically designed for use in high-risk, pressurised healthcare environments where high cleanability is required such as emergency rooms, washing facilities and intensive care (compliant with HBN 00-10, TDM 4032:0.6 and HTM 60). For use in operating theatres, seek client approval. Does not contribute to the growth of MRSA, high-rated Bacteriological Class B1 and Clean Room Classification ISO Class 2. Very good cleanability properties, chemical resistance classification ‘Excellent’. [/LIST]

Straight grab bar Ø 32mm tube, 300mm centres for PRM. HR bright white NYLON. For use as a handrail and grab bar for WCs, showers or baths. Suitable for intensive use in public places or the healthcare sector. High strength polyamide (Nylon): with 2mm reinforced steel core treated against corrosion. Uniform non-porous surface for easy maintenance and hygiene. Good resistance to chemical products and cleaning. Anti-UV treatment. Warm to the touch. 38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. Concealed fixings, secured to wall on a 6-hole cover plate, Ø 73mm. Supplied with stainless steel screws for concrete walls. Tested to over 200kg. Maximum recommended user weight: 135kg. 10-year warranty. CE marked.

Angled grab bar 135°, Ø 32mm, for PRM. Bright white HR Nylon. For use as a handrail (horizontal part) or as a grab bar (135° part) for WCs, showers or baths. Universal for either left or right side. Dimensions: 400 x 400mm. Suitable for intensive use in public places or the healthcare sector. High strength polyamide (Nylon): with 2mm reinforced steel core treated against corrosion. Uniform non-porous surface for easy maintenance and hygiene. Good resistance to chemical products and cleaning. Anti-UV treatment. Warm to the touch. 38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. 3 fixing points allow the stop of the wrist and an easy installation. Fixings concealed by a 6-hole cover plate, Ø 73mm. Supplied with stainless steel screws for concrete walls. Tested to over 200kg. Maximum recommended user weight: 135kg. 10-year warranty. CE marked.

Straight shower bar Ø 32mm with sliding shower head holder. Can be used as a vertical grab bar and a shower head rail for showers or baths. Nylon HR sliding shower head holder with ergonomic locking ring. Possible to add a sliding soap dish (order separately). Height: 1,150mm. Suitable for intensive use in public places or the healthcare sector. High strength polyamide (Nylon): with 2mm reinforced steel core treated against corrosion. Uniform non-porous surface for easy maintenance and hygiene. Good resistance to chemical products and cleaning. Anti-UV treatment. Warm to the touch. 38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance. Fixings concealed by a 6-hole cover plate, Ø 73mm. Supplied with stainless steel screws for concrete walls. Tested to over 200kg. Maximum recommended user weight: 135kg. 10-year warranty. CE marked.

Removable, hanging shower seat for people with reduced mobility. To hang on Ø 32mm grab bars Ø 32. Wide model. HR Nylon comfort seat and backrest. Dimensions: 590 x 420 x 510mm. Suitable for intensive use in public places or the healthcare sector. Detachable solid seat made from high strength polymer. Uniform non-porous surface for easy maintenance and hygiene. Good resistance to chemical products and cleaning. Anti-UV treatment. Warm to the touch. Bacteriostatic 304 stainless steel structure Ø 32 x 1.5mm UltraPolish bright polished finish. Adjustable screw jacks guarantee a good horizontal position. Large protective caps prevent damage to the wall. Tested to over 200kg. Maximum recommended user weight: 135kg. 10-year warranty. CE marked.

HR Nylon comfort seat for fixed installation, for people with reduced mobility. Wide model. Dimensions: 506 x 420 x 138mm. Folded dimensions: 95 x 540mm. Retained in upright position. Slowed down descent. Suitable for intensive use in public places or the healthcare sector. Detachable solid seat made from high strength polymer. Uniform non-porous surface for easy maintenance and hygiene. Good resistance to chemical products and cleaning. Anti-UV treatment. Warm to the touch. Bacteriostatic 304 stainless steel structure Ø 32mm. UltraPolish bright polished finish. 6 fixing points. Supplied with stainless steel screws for concrete walls. Tested to over 200kg. Maximum recommended user weight: 135kg. 10 year warranty. CE marked.

Lift-up comfort shower seat with leg for fixed installation, for PRM. Wide model with HR comfort seat. Dimensions: 506 x 420 x 480mm. Folded dimensions: 130 x 540mm. Retained in upright position. Slowed down descent. Suitable for intensive use in public places or the healthcare sector. Detachable solid seat made from high strength polymer. Uniform non-porous surface for easy maintenance and hygiene. Good resistance to chemical products and cleaning. Anti-UV treatment. Warm to the touch. Bacteriostatic 304 stainless steel structure Ø 32mm. UltraPolish bright polished finish. Reinforced by a folding, articulated leg made from 304 stainless steel tube Ø 25mm x 1.2mm. 6 fixing points. Supplied with stainless steel screws for concrete walls. Tested to over 300kg. Maximum recommended user weight: 170kg. 10-year warranty. CE marked.

ASSA ABLOY France solution for main access of building - intensive traffic - single leaf, equipped with a multipoint electric lock, a pair of design handles, a European profile cylinder with patented reversible key and a door closer. The solution is equipped with: - a multi-point electric motorized lock CERTA EL524 Performance, according to EN1125 and EN179, by Abloy - a pair of lever handles LINOX on steel roses, according to EN1906, by Vachette - a cylinder 7101 RADIALIS, patented, with reversible keys, according to EN 1303, by Vachette - a door closer DC700 Cam-Motion®, according to EN 1154, by ASSA ABLOY Typical application markets: ERP (commercial, education, health, offices, etc.) For more information, please contact us: http://www.assaabloy.fr/en/contact-us

WINDOW STRUCTURE The type F flat roof window features a sleek modern look, characterised by excellent thermal insulation parameters. The structure of the frame is the same as for flat roof windows with a dome however the main difference lies in the glazing unit which is bonded using modern manufacturing technologies to produce a highly aesthetic and innovative design. The frame is constructed of multi-chamber PVC profiles filled with insulation material. A minimalist and perfect designed DEF flat roof window has been awarded with prestigious Red Dot Design Award. D_F WINDOW - COLOURLINE VERSION The innovative flat roof window D_F ColourLine allows you to match the colour of the window finish with theexisting roof design. A wide range of colours in accordance with the RAL Classic Palette. THE EXCELLENT SOUND INSULATION The DEF flat roof window with a double-chamber DU6 glazing unit has been tested for sound insulation during heavy rain. The result obtained, LIA= 36 [dB] confirms the high level of resistance against sound penetration, therefore the window is ideal for places where peace and silence are welcome. ACCESSORIES The structure of the window enables installation of internal as well as external accessories. The external awning blind protects against room overheating while internal accessories protect from intensive sun light and provide a decorative element. INSTALLATION RANGE The type F flat roof window is suitable for roof pitches between 2 and 15 degrees. GLAZING UNITS Windows are available with two glazing units. -DU6 - Energy-efficient, double-glazed with a whole window U-value of 0.70 W/m²K ). -DU8 Passive, triple-glazed with a whole window U-value of 0,64 W/m²K AVAILABLE SIZES In addition to standard sizes, the D_F type windows can be manufactured in non-standard sizes (in the range of 60x60 - 120x220cm). This enables existing skylights which do meet current thermal insulation requirements to be replaced with ease. DEF - Electrically opened with wireless Z-Wave system. The kit includes AC adapter, remote control and rain sensor. Sash tilts 15cm. Warranty: 10 years warranty period for window lifetime – glazing until hail resistance warranty 2 years for control elements in electric versions 2 years for gas springs

WINDOW STRUCTURE The type F flat roof window features a sleek modern look, characterised by excellent thermal insulation parameters. The structure of the frame is the same as for flat roof windows with a dome however the main difference lies in the glazing unit which is bonded using modern manufacturing technologies to produce a highly aesthetic and innovative design. The frame is constructed of multi-chamber PVC profiles filled with insulation material. A minimalist and perfect designed DEF flat roof window has been awarded with prestigious Red Dot Design Award. D_F WINDOW - COLOURLINE VERSION The innovative flat roof window D_F ColourLine allows you to match the colour of the window finish with theexisting roof design. A wide range of colours in accordance with the RAL Classic Palette. THE EXCELLENT SOUND INSULATION The DEF flat roof window with a double-chamber DU6 glazing unit has been tested for sound insulation during heavy rain. The result obtained, LIA= 36 [dB] confirms the high level of resistance against sound penetration, therefore the window is ideal for places where peace and silence are welcome. ACCESSORIES The structure of the window enables installation of internal as well as external accessories. The external awning blind protects against room overheating while internal accessories protect from intensive sun light and provide a decorative element. INSTALLATION RANGE The type F flat roof window is suitable for roof pitches between 2 and 15 degrees. GLAZING UNITS Windows are available with two glazing units. -DU6 - Energy-efficient, double-glazed with a whole window U-value of 0.70 W/m²K ). -DU8 Passive, triple-glazed with a whole window U-value of 0,64 W/m²K AVAILABLE SIZES In addition to standard sizes, the D_F type windows can be manufactured in non-standard sizes (in the range of 60x60 - 120x220cm). This enables existing skylights which do meet current thermal insulation requirements to be replaced with ease. DMF - manually opened by means of ZSD control rod. Sash tilts 30cm. Warranty: 10 years warranty period for window lifetime – glazing until hail resistance warranty 2 years for gas springs

WINDOW STRUCTURE The type F flat roof window features a sleek modern look, characterised by excellent thermal insulation parameters. The structure of the frame is the same as for flat roof windows with a dome however the main difference lies in the glazing unit which is bonded using modern manufacturing technologies to produce a highly aesthetic and innovative design. The frame is constructed of multi-chamber PVC profiles filled with insulation material. A minimalist and perfect designed DEF flat roof window has been awarded with prestigious Red Dot Design Award. D_F WINDOW - COLOURLINE VERSION The innovative flat roof window D_F ColourLine allows you to match the colour of the window finish with theexisting roof design. A wide range of colours in accordance with the RAL Classic Palette. THE EXCELLENT SOUND INSULATION The DEF flat roof window with a double-chamber DU6 glazing unit has been tested for sound insulation during heavy rain. The result obtained, LIA= 36 [dB] confirms the high level of resistance against sound penetration, therefore the window is ideal for places where peace and silence are welcome. ACCESSORIES The structure of the window enables installation of internal as well as external accessories. The external awning blind protects against room overheating while internal accessories protect from intensive sun light and provide a decorative element. INSTALLATION RANGE The type F flat roof window is suitable for roof pitches between 2 and 15 degrees. GLAZING UNITS Windows are available with two glazing units. -DU6 - Energy-efficient, double-glazed with a whole window U-value of 0.70 W/m²K ). -DU8 Passive, triple-glazed with a whole window U-value of 0,64 W/m²K AVAILABLE SIZES In addition to standard sizes, the D_F type windows can be manufactured in non-standard sizes (in the range of 60x60 - 120x220cm). This enables existing skylights which do meet current thermal insulation requirements to be replaced with ease. DXF - non opening Warranty: 10 years warranty period for window lifetime – glazing until hail resistance warranty

FAAC J275 HA 2K automatic retractable perimeter security bollard is recommended for intensive usage in perimeter security applications. Tested in accordance to ASTM F2656-07 standard (“Standard Test Method for Vehicle Crash Testing of Perimeter Barriers”), via software 3D simulation. J275 HA 2K main features are:: 1. Integrated Hydraulic Unit concept 2. Guaranteed for a high use frequency 3. Simple maintenance (can be performed by a single person) 4. Rapid and silent movements 5. Anti-burglar head (manual lowering device protected by armored keylock) 6. High resistance to impacts (M30 ranking in double installation) 7."Gentle Stop” function to grant soft stop on the limit switch

The new GEALAN-System S9000 is an innovative window system for PVC-Windows and PVC-Doors with a construction depth of 82.5 mm. It combines the countless advantages of the central gasket and the overlap gasket. The large construction depth, six chamber profiles and three consistent sealing surfaces guarantee a outstanding thermal insulation. With the Profile combination 6016 / 6003 you can build the window even more high-class by using the additional possibilities like static dry glazing (STV®), intensive core insulation (IKD®) or acrylcolor.

The new GEALAN-System S9000 is an innovative window system for PVC-Windows and PVC-Doors with a construction depth of 82.5 mm. It combines the countless advantages of the central gasket and the overlap gasket. The large construction depth, six chamber profiles and three consistent sealing surfaces guarantee a outstanding thermal insulation. With the Profile combination 6016 / 6003 you can build the window even more high-class by using the additional possibilities like static dry glazing (STV®), intensive core insulation (IKD®) or acrylcolor.

The new GEALAN-System S9000 is an innovative window system for PVC-Windows and PVC-Doors with a construction depth of 82.5 mm. It combines the countless advantages of the central gasket and the overlap gasket. The large construction depth, six chamber profiles and three consistent sealing surfaces guarantee a outstanding thermal insulation. With the Profile combination 6016 / 6003 you can build the window even more high-class by using the additional possibilities like static dry glazing (STV®), intensive core insulation (IKD®) or acrylcolor.