It was designed as early as 1953, but due to the complexity of its manufacture, it only entered regular production in 2012. With its perfection of design as well as touch of fashionable Scandinavian design, it represents the dream of every connoisseur of the aesthetic. Material: from natural, environmentally-friendly materials: white varnished beech wood and white varnished curved plywood panel veneered with ash veneer.http://www.rex-kralj.si

Finestra singola a due ante, sopraluce e sottoluce opzionali e diversi tipi di apertura.

Simeto due 64 cm vanity basin

Simeto due 94 cm vanity basin

Simeto due 124 cm double vanity basin

Rubinetto con diverse tipologie.

This stool made by the genius Niko Kralj is just one in a long line of such sophisticated and ingeniously designed products. Conceived way back in 1954, the stool remains a concept of elegance. It is distinguished by clean lines and a minimalistic appearance, which, however, does not mean that it is visually boring, but quite the opposite. Due to its cross type construction, which in a unique way connects the remaining elements of the stool, it appears that the upper part of the stool floats effortlessly above the legs. Perfectly connected wood from a technical point of view, aided with the help of only one screw, lends itself to creating a stable and comfortable stool.

[LIST] Highly thermally insulated sliding and lift-and-slide system Uw values of < 1.3 W/(m²K), depending on the design Excellent drainage system with watertightness up to 1,050 Pa Sliding and lift-and-slide systems with optimised thermal insulation Vent weight up to 300 kg, available for up to 400 kg special design High-quality fi ttings components for easy operation High degree of transparency due to large vent sizes of up to 9 m², depending on the design [/LIST]

[LIST] Thermally insulated sliding and lift-and-slide system Thermal insulation in accordance with DIN EN ISO 10077, Part 1, Uw values of 1.9 W/(m²K), and a unit size of 2,500 mm x 2,500 mm, double glazing with a Ug value of 1.1 W/(m²K) Vent sizes: maximum width 3,000 mm maximum height 3,000 mm Vent weight up to 400 kg Watertightness up to class 9A in accordance with DIN EN 12208 Burglar resistance up to class RC 2 (WK2) Wide choice due to single, double and triple track outer frames [/LIST]

CI System Glass Element FE – Variety of transparent design & optimum energy efficiency CI System Smoke Lift Glass Element FE – individual daylight and smoke ventilation elements for high- class residential and administrative buildings With the LAMILUX CI System Element F series, we offer you beautifully shaped elements for flat roofs which will allow you to implement all aspects of modern, energy-efficient, design-oriented construction and put ambitious architectural ideas into practice. The certified SHEV CI System Smoke Lift Glass Element FE according to EN 12101-2 stands out due to excellent heat and sound insulation values and to individually selectable RAL-colors. [LIST] Available with double or triple thermal insulation glazing with Ug values of 1.1 to 0.6 W/m2K optionally with toughened glass, and with clear, matt film if required Available in many dimensions Optimal thermal insulation thanks to thermal-bridge-free overall structure Intelligent controls for natural ventilation and solar protection roller blinds Thermally insulated, joinless GRP upstand 15 (only standard model), 30, 40, 50 cm in height, with U values of 0.5 W/m2K to 0.9 W/m2K (depending on the characteristic) Environmental product declaration acc. to EN 15804 Pyramid-shaped or hipped-roof daylight systems possible (only by standard, not by smoke lift) fast opening (165°) of the smoke lift in less than 60 seconds smoke lift serial with multistage ventilation [/LIST]

Metawell® modular ceilings do not require visible rails or longitudinal frames. Instead, the individual ceiling elements are suspended directly from a concealed substructure. The ceiling elements can be pushed together within a few millimetres to each other. Passive installation strips are placed on the ceiling elements for subsequent installation of partition walls. If necessary, they can be removed easily and the wall can be erected without affecting the ceiling structure. Due to the big dimension of ​​the ceiling panels, the hydraulic connection of the panels is not necessary, which minimizes installation errors and installation times significantly. Through visually offset installation panels and many options for appealing surface design, Metawell® modular ceilings allow the realisation of sophisticated design solutions. Additionally the product has an EPD (Environmental Product Declaration).

[LIST] With the FW 50+ systems, the design of even complex geometrical skylight constructions, such as arcades, glass domes, pyramids and barrel vaults is straightforward and can produce stunning result Elegant skylight constructions with broad spans are also possible for large projects, such as shopping centres, adminsistrative buildings, hotels, eshibition halls ans leisure centres The highly functional Schüco Roof Window AWS 57 RO is another example of a powerful opening unit Schüco Roof Window AWS 57 RO: High level of flexibility thanks to two different heights of outer frame and two different thermal insulation standards, high level of weathertightness due to an additional centre gasket, Glass thicknesses of 26 mm - 48 mm can be installed, i. e. also suitable for special glazing and stepped glazing, concealed hinges (WK2 / RC 2) increase security against break-in Opening angle of up to 90° is possible, can be used for roofs with slopes from 7° to 75°, Roof slopes < 7° or > 75° on request [/LIST]

With the Hundranian, Jonas has taken inspiration from the chairs of the 1910s and 1920s, and developed a modern café chair. It offers an idiomatic simplicity that makes the chair ideal in environments where a large number of seats are required, and where demands are placed on both form and function. The Hundranian is stackable (6 chairs) and highly stable, thanks to its aluminium frame underneath the seat. It is also very comfortable, due to the generous and embracing backrest. The choice of fi nish and colour determines the chair's fi nal expression. Hundranian will also be available with armrests. The aluminium frame can also be lacquered in Stolab's standard colours. Standard on the frame is silver.

Unitized facades with high level of cost-effectiveness, functionality as well as an attractive appearance – and façade bracket for universal load connection [LIST] The design of the Schüco Façade USC 65 F (Unitised System Construction) is flexible and can be fabricated efficiently. With its all-round narrow face width of only 65 mm as well as maximum unit weights up to 500 kg, it enables large architecturally appealin For using opening units in unitised façades, there is a wide range of Schüco windows from the AWS to the super-insulated Schüco AWS 114 SG.SI series Different lengths of insulating bar with Uf values of 1.4 W/(m²K) to 2.9 W/(m²K) for variable adjustment to different thermal insulation requirements Comprehensive system tests in accordance with European and American test standards Large unit dimensions and heavy unit weights of up to 500 kg possible; 125 mm and 150 mm basic depths Glass thicknesses : Single glazing from 4 - 16 mm; Insulating glass from 16 - 56 mm Excellent weathertightness due to overlapping gasket for coupling gasket and saddle gasket; 3-chamber principle Burglar resistance WK2 in accordance with DIN ENV 1627 [/LIST]

Heavy duty steel wall cabinet with adjustable shelves suitable for storage of dental laboratory case pans and dental laboratory equipment. Open front construction, no doors, with adjustable shelves. All components must be rust resistant due to the damp environment. Dimensions and shelf configuration vary by manufacturer. The supporting wall may require reinforcement for mounting this cabinet.

Heavy duty steel wall cabinet with adjustable shelves suitable for storage of dental laboratory case pans and dental laboratory equipment. The unit has open front construction (no doors) and adjustable shelves. All components must be rust resistant due to the damp environment. Specific dimensions and shelf configuration vary by manufacturer. The supporting wall may require reinforcement for mounting this cabinet.

This stone is white and consists of lime, sand, cement and water. Inside, it contains millions of air pores, which also gave him the name: aerated concrete. Over 70 years ago it was for the first time industrially produced in southern Sweden’s Yxhult in times of scarcity of raw materials and energy due to stricter laws. From the original name "Yxhults Anghärdade Gasbetong" a short time later became the first registered building materials brand in the world, which pushed the worldwide carrer of Ytong and changed the building construction sustainably. Since then, Ytong with the concise Y of its hometown and the significant yellow color, stands like no other brand for construction with optimal insulation. This material has become a standard element in residential building on an international level. Due to the extensive product range it is possible to build a house from the basement to the roof completely with aerated concrete elements. Ytong aerated concrete offers the right solution for every application with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls, you will always find the right product. In renovations new room situations can efficiently be created with Ytong aerated concrete masonry. Ytong, the classic building material, stands like no other for optimal thermal insulation and massive quality.

The Sedus open up conference and visitor chairs show how light sitting comfort can look. Characterised by transparency, the design conveys openness and simultaneously stands out due to its inviting contours. Irrespective of whether you choose the swivel chair version or the cantilever chair, you decide in favour of a comfortable sitting experience.

Inward opening, highly thermally insulated aluminium window system [LIST] Uf value 0.9 W/(m²K) (PT insulating bars) and Uf value 1.2 W/(m²K) (PA insulating bars) with a face width of 117 mm Uw value 0.88 W/(m²K) (PT insulating bars) with Ug = 0.6 W/(m²K) and plastic spacer and Uw value 1.2 W/(m²K) (PA insulating bars) with Ug = 1.1 W/(m²K) and plastic spacer Flexible level of insulation due to different design options Integration of the new Schüco AvanTec SimplySmart fittings range Burglar resistance to WK3 (RC 3) in accordance with DIN V ENV 1627 [/LIST]

Outward opening, highly thermally insulated aluminium window system [LIST] New system profiles with hollow chamber centre gasket for outward-opening windows with optimum thermal insulation of Uf value 1.3 W/(m²K) Flexible level of insulation due to different design options Integration of the new Schüco AvanTec SimplySmart fittings range [/LIST]

Easy Access, Inward opening, highly thermally insulated aluminium window system [LIST] Flexible level of insulation due to different design options Integration of the new Schüco AvanTec SimplySmart fittings range [/LIST]

Inward opening, highly thermally insulated aluminium window system [LIST] Optimum thermal insulation with Uw values to 1.0 Uf value W/(m²K) Innovative PA insulting bar contour with increased proportion of foam Versatile and modular fittings solutions, concealed and surface-mounted with burglar resistance up to RC 2 Vast range of design options due to rebated and flush-fitted vent appearance on the outside Ventilation vents can be used in all outer frames of the standard systems, block series and window façades but as well as in the façade Cover profiles and multi-functional corner pieces for easy, time-saving fabrication Concealed and surface-mounted manual fittings solutions based on Schüco AvanTec SimplySmart as well as the mechatronic Schüco TipTronic fitting [/LIST]

SKILL represents a new concept of outdoor lighting fitting; a recessed/not-recessed luminaire for wall mounting. It concentrates all the advantages of a recessed fitting, but without requiring a housing in the wall. Due to this easy and highly user friendly method of installation, SKILL is a unique LED luminaire, assuring high lighting performance and total absence of glare. The most modern electronic technology is contained in the thickness of only 3 cm and provides an excellent quality of light while saving energy. SKILL is available as round and square versions and in two different sizes.

This BIM object for shower channels CeraLine W contains eight different lengths (500, 600, 700, 800, 900, 1000, 1100 und 1200 mm) and cover plates in different colours and surface finishes. The CeraLine W shower channel can be installed directly at wall, the flow capacity is 0,8 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine Plan F contains eight different lengths (500, 600, 700, 800, 900, 1000, 1100 und 1200 mm) and cover plates in different colours and surface finishes. The CeraLine Plan F shower channel can be installed at any point in the floor surface, the flow capacity is 0,7 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine Plan W contains eight different lengths (500, 600, 700, 800, 900, 1000, 1100 und 1200 mm) and cover plates in different colours and surface finishes. The CeraLine Plan W shower channel can be installed directly at wall, the flow capacity is 0,7 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

With its variety of colours, formats and surfaces, KeraTwin® offers the architect an enormous freedom of design. And as diverse fastening alternatives ensure technical and constructional flexibility, this system offers the appropriate solution to every challenge – even on difficult bases. As facade system with the widest variety of colours, KeraTwin® permits every architect to realize its creative ideas. Thus, besides the colour range “SpectraView” developed by the designer Peter Zoernack with nine colour families harmoniously matched to each other and contrasting colours, the colour systems “Natura unglazed”, “Design unglazed” and “Design glazed” are also available. On request, the panels are also supplied with profiles which – due to their three-dimensional structure – can make large facades less monotonous and lend an entire building a distinctive character. The joints are realized in such a way that the construction is optimally protected against driving rain. With their relatively low weight of 32 kg/m², the panels are easy to transport and to install. KeraTwin cermic panels are HT-coated (Hydrophilic tile).

Intended as an iconic element within the office, thanks to its dynamic and open conception, it enables conversation, reading and the use of electronic devices without falling into a relaxed state which impedes your concentration. To maintain the active attitude, we have removed its arms and set at 180 degrees which favours privacy for the user due to its high degree of sound proofing.

Intended as an iconic element within the office, thanks to its dynamic and open conception, it enables conversation, reading and the use of electronic devices without falling into a relaxed state which impedes your concentration. To maintain the active attitude, we have removed its arms and set at 180 degrees which favours privacy for the user due to its high degree of sound proofing.

Intended as an iconic element within the office, thanks to its dynamic and open conception, it enables conversation, reading and the use of electronic devices without falling into a relaxed state which impedes your concentration. To maintain the active attitude, we have removed its arms and set at 180 degrees which favours privacy for the user due to its high degree of sound proofing.

WICSTYLE 65 evo with its flush leaf design in 65 mm system depth and a comprehensive application range is perfectly qualified for highest demands in design, technological quality and performance. Due to its favourable price/performance ratio it constitutes an economical aluminium door solution for almost any requirement. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: Until 7A Resistance to wind load: Class C2 Acoustic performance: RW (C; Ctr ) until 43 (–2; –5) dB Operating forces: Class 2 Load bearing capacity of safety devices: Fulfilled Mechanical strength: Class 3 Repeated opening / closing: Class 7 (500,000 cycles) Impact resistance: Class 1 Behaviour between different climates: Until class 2(e) 2(d) Burglar resistance: RC1N, RC2N, RC2, RC3 Bullet resistance: Until FB4 Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

WICLINE 95 meets the high requirements of the Dr. Feist Passive House Institute in Darmstadt, Germany, and due to its intelligent modular design offers maximum flexibility in planning projects. In the WICLINE 95 the thermoframe insulator sits inside the window and can be finished as a sashframe and conveniently installed by the installer using the intelligent Clips Technology. This allows a variable setting of the Uf value of the window. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Waterproofing against driving rain: E900 Resistance to wind load: Class C5 / B5 Soundproofing: Rw (C;Ctr ) = 47 (–1; –4) dB Operating forces: Class 1 Load capacity of safety precautions: passed Mechanical strength: Class 4 Continuous operation: Class 3 (20,000 cycles) Corrosion resistance of fittings: Class 5 Burglar resistance: RC1N, RC2N, RC2, RC3 Quality management: Certified according to ISO 9001:2008

Door construction for multi-purpose applications [LIST] Multi-purpose: fire and smoke protection, burglar resistance, safety barrier loading, sound reduction, access control and panic function Internal use of side-hung door drives Attractive appearance even in door rebate area due to well-concealed intumescent strips Narrow profile face widths Robust 5-chamber hollow profiles (door), basic depth 80 mm Sound reduction Safety barrier loading Opposed opening door External use Clear opening height approved up to 2988 mm Predominantly compatible with the Schüco ADS Door Systems All fire-resistant glass required can be supplied subject to approval [/LIST]

The ideal option for combining high thermal efficiency and low insulation thickness. Especially suitable for upgrading the energy efficiency of existing buildings, due to its reduced thickness for equivalent insulation performance.

MIPOLAM TECHNIC EL5 is a conductive flexible homogeneous compacted available in tiles. The conductive carbon coated PVC pellets create a perfect conductive network for permanent conductive properties and antistatic properties (< 20 V) throughout its full life expectancy. It acts as a continuous conductive 10^4 ≤ Rt ≤ 10^6 (EN 1081) and complies with EN 649. Reaction on fire group Bfl-s1, classification 34/43, slip resistance approved for public areas. TVOC ater 28 days less than 10 μg/ m3 due to ISO 16000-6. Without any content listed as CMR (carcinogenic, mutagenic, and reprotoxical due to REACH).

Yonoh presents a sofa and armchair duo with a Japanese touch. The concept, as its name suggests, takes its inspiration from the powerful silhouette of sumo wrestlers, contrasted with the light wooden clogs that they use to and from the ring (dohyō). The strong curves and reduced dimensions make it an ideal piece for the contract market. The raised seams help to define the curved lines of the model. Despite its hefty appearance, Sumo has a small footprint (178cm and 92cm for the sofa and armchair respectively). The wood chosen for the collection is ash, due to its texture and grain. A wide array of stains is available, from natural shades to vibrant colours like pink or yellow. Sumo can be upholstered in fabric as well as artificial or natural leather. The covers cannot be removed.

Yonoh presents a sofa and armchair duo with a Japanese touch. The concept, as its name suggests, takes its inspiration from the powerful silhouette of sumo wrestlers, contrasted with the light wooden clogs that they use to and from the ring (dohyō). The strong curves and reduced dimensions make it an ideal piece for the contract market. The raised seams help to define the curved lines of the model. Despite its hefty appearance, Sumo has a small footprint (178cm and 92cm for the sofa and armchair respectively). The wood chosen for the collection is ash, due to its texture and grain. A wide array of stains is available, from natural shades to vibrant colours like pink or yellow. Sumo can be upholstered in fabric as well as artificial or natural leather. The covers cannot be removed.

Aluminium suspended raster ceilings are an alternative to other types of suspended ceilings. Raster ceilings, in addition to their unquestionable aesthetic values, are non-flammable and non dripping in case of fire, and they do not interfere with technical installations such as air conditioning, ventilation systems, electrical and telecommunication wirings. Due to the open nature of the raster ceiling, any fire protection system, both signalling and sprinkling can be installed above the suspended ceiling. Suspended raster ceilings are also lightweight and easy to install. Due to these features, suspended raster ceilings are increasingly used in objects such as banks, offices, shopping malls and showrooms, airports and railway stations, etc. Open cell ceiling components are manufactured by BARWA SYSTEM Sp. z o.o., with high quality pre-finished aluminium sheet with a thickness from 0.43 to 0.6 mm. Varnish is applied to pre-treated aluminium tapes with the use of double-layer “Coil Coating” method, and then baked.

PP200 vertical panels are functional interior finishing elements, dedicated to large rooms with high noise level, such as airports, waiting rooms, entry halls, conference rooms, restaurants, dining halls and manufacturing halls of high noise intensity. Due to the open nature of panel ceilings, any fire protection system both sprinkling and signalling can be installed above the suspended ceiling. Open cell ceilings are also lightweight and easy to install. The PP ceiling elements are manufactured by the BARWA SYSTEM SP. z o.o. using top quality, factory-painted aluminium sheet metal. Varnish is applied in powder on specially pre-treated aluminium tapes.

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

Multipor exterior thermal Insulation The Multipor thermal insulation composite system (TICS short or ETIC system) is the ideal solution for energy-efficient and sustainable insulation of exterior walls - both in new buildings and in renovation. Strong benefits The non-flammable, fully mineral EIFS of Multipor belongs to building material class A. In the case of a fire no toxic fumes and smoke. The ETIC system is fully permeable and thus transported water -Which algae and fungi growth benötigen- direct, thus preventing an algae of the facade. The heat storage capacity and moisture retention capacity increase this effect. On the use of harmful biocides and toxins can be dispensed with due to this natural property. • Efficient thermal insulation for high-quality building solutions in new and existing buildings • Non-flammable from the base to the roof - no fire bolt • Full Mineral thermal insulation composite system • protection against algae and fungi - without biocides • Solid and dimensionally stable - Woodpecker Safe • High compressive strength - density of up to 115 kg / m³ • Officially approved system • physiologically harmless and 100% recyclable

An interesting collection of Scandinavian style. High back and correct profiling provide maximum comfort and convenience. The real ornamentation is due to ash wood elements, the unique pattern of them is clearly underlined by the use of natural oils. The collection captivates its unique form and provides an attractive inspiration for the arrangement of modern interiors.

Horizontal wall protection against intensive wheeled traffic for corridors, access and storage areasHorizontal wall protection against intensive wheeled traffic for corridors, access and storage areas[LIST] Perfect alliance between impact resistance and design Minimised projection thanks to ist narrow bevelled end pieces Optimal hygiene thank to the the wall-hugging and the reduced retention surfaces due to the reinforced lips Easy installation on aluminium clip or option on aluminium rail Perfect alliance between impact resistance and design Minimised projection thanks to ist narrow bevelled end pieces Optimal hygiene thank to the the wall-hugging and the reduced retention surfaces due to the reinforced lips Easy installation on aluminium clip or option on aluminium rail[/LIST]

3 heights available - Easy cleaning - Heavy traffic Wall - Wall protection Horizontal wall protection against intensive wheeled traffic for corridors, kitchen and logistic areas [LIST] Impact resistance due to optimal PVC thickness 3 mm Impact energy dissipated through 4 internal ribbing reinforcements Quick installation with end cap serving as first clip Easy cleaning due to rounded design and smooth surface[/LIST]

Depth adjustable - Easy cleaning - Special bed heads Wall - Wall protection Vertical protection against bed head impacts • Impact energy dissipated through 4 internal ribbing reinforcements • Depth adjustable from 256 to 336 mm to adjust to the medical equipment • Rounded design prevents build-up of dust and germs • Easy cleaning due to smooth surface

2 heights available - Easy cleaning - Localised heavy impacts Wall - Wall protection Resistant and decorative plate for walls exposed to abrasion and moderate impacts. ◾Shock absorption thanks to ribbing reinforcement ◾Easy cleaning due to smooth surface ◾No tear off and no dust accumulation thanks to rounded edges ◾Pre-adhesived foam strips

Suitable for food-handling areas - Protection - Heavy traffic Wall - Wall protection Stainless steel protection for wall and door in heavy traffic corridors or food-handling areas [LIST] Stainless steel approved for food handling areas High mechanical and corrosion resistance Optimal thickness: 10/10e Easy cleaning due to smooth non-porous surface[/LIST]

On aluminium core - High impact strength - Heavy traffic Wall - Corner protection Efficient protection for 90° angles exposed to heavy impact from trolleys and carts •Effective protection and harmless spine due to unique rounded design •Protection of the angle with the U shape aluminium core •High impact resistance thanks to a 2.5 mm optimal thickness •Pre-drilled in staggered rows aluminium core

On aluminium core - Variable angle - Heavy traffic Wall - Corner protection High performance protection for corners exposed to heavy traffic, fitting with 135° or variable angles •Variable angle from 90 to 135° •Excellent shock resistance due to two internal PVC reinforcement beads •Better protection and more flexibility thanks to aluminium core encircling the angle •Pre-drilled in staggered rows aluminium core •Harmless rounded spine

Efficient corner protection in stainless steel recommended in food-handling areas[LIST] Stainless steel approved for food handling areas No tear off possible thanks to beveled edges Optimal thickness: 10/10e Easy cleaning due to smooth non-porous surface[/LIST

Protection - Easy cleaning - Moderate traffic Wall - Door protection Targeted protection of the door with the Contact plate against abrasion and repeated impacts •Shock absorption due to ribbing reinforcement •Easy cleaning due to smooth surface •No dust accumulation thanks to rounded edges •Pre-adhesived foam strips to be reinforced with mastic glue

Stainless steel protection for wall and door in heavy traffic corridors or food-handling areas[LIST] Stainless steel approved for food handling areas High mechanical and corrosion resistance Optimal thickness: 10/10e Easy cleaning due to smooth non-porous surface[/LIST]

Accessibility - 100% antibacterial - Moderate traffic Wall - Handrails Ergonomic handrail providing high quality grip and fitting any building •Modularity: 17 accessories, technical solutions for stairs and service ducts •PVC sheath already installed on the aluminium profile •Closer and accessories matched with the smooth PVC profile •Easy cleaning due to perfect roundness and smooth continuous surface •Fight against bacteria thanks to bactericidal joints and antibacterial smooth material

2 heights available - Easy cleaning - Localised heavy impacts Wall - Wall protection Resistant and decorative plate for walls exposed to abrasion and moderate impacts. ◾Shock absorption thanks to ribbing reinforcement ◾Easy cleaning due to smooth surface ◾No tear off and no dust accumulation thanks to rounded edges ◾Pre-adhesived foam strips

3 heights available - Easy cleaning - Heavy traffic Wall - Wall protection Horizontal wall protection against intensive wheeled traffic for corridors, kitchen and logistic areas [LIST] Impact resistance due to optimal PVC thickness 3 mm Impact energy dissipated through 4 internal ribbing reinforcements Quick installation with end cap serving as first clip Easy cleaning due to rounded design and smooth surface[/LIST]

3 heights available - Easy cleaning - Heavy traffic Wall - Wall protection Horizontal wall protection against intensive wheeled traffic for corridors, kitchen and logistic areas [LIST] Impact resistance due to optimal PVC thickness 3 mm Impact energy dissipated through 4 internal ribbing reinforcements Quick installation with end cap serving as first clip Easy cleaning due to rounded design and smooth surface[/LIST]

On aluminium core - Variable angle - Heavy traffic Wall - Corner protection High performance protection for corners exposed to heavy traffic, fitting with 135° or variable angles •Variable angle from 90 to 135° •Excellent shock resistance due to two internal PVC reinforcement beads •Better protection and more flexibility thanks to aluminium core encircling the angle •Pre-drilled in staggered rows aluminium core •Harmless rounded spine

Efficient corner protection in stainless steel recommended in food-handling areas[LIST] Stainless steel approved for food handling areas No tear off possible thanks to beveled edges Optimal thickness: 10/10e Easy cleaning due to smooth non-porous surface[/LIST]

Protection - Easy cleaning - Moderate traffic Wall - Door protection Targeted protection of the door with the Contact plate against abrasion and repeated impacts •Shock absorption due to ribbing reinforcement •Easy cleaning due to smooth surface •No dust accumulation thanks to rounded edges •Pre-adhesived foam strips to be reinforced with mastic glue

An interesting collection of Scandinavian style. High back and correct profiling provide maximum comfort and convenience. The real ornamentation is due to ash wood elements, the unique pattern of them is clearly underlined by the use of natural oils. The collection captivates its unique form and provides an attractive inspiration for the arrangement of modern interiors.

The HS 330 offers unique design and exceptional comfort, combined with high-quality technology: · More light through large-scale glazings · Available up 580 0 x 2800 mm · Narrow sliding frame and frameless side elements · Easy lifting and sliding of sash up to 400 kg sash weight · Energy efficient and heating cost saving · Low heat emission due to triple glazing · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

The Clint chair designed by Tveit and Tornøe was awarded the Norwegian Award for Design Excellence in 2010. Clint has become a sales success due to its Scandinavian simplicity, good ergonomics and comfort.Clint is a thorough chair system with a wide range of options that cover the needs for seating furniture from the lounge areas to the boardroom. Clint is a chair family where all designs bear the family resemblance for a coherent interior design. Numerous possibilities for the choice of fabric / leather, various bases, armrests and low or high back makes for the perfect conference chair.

The Clint chair designed by Tveit and Tornøe was awarded the Norwegian Award for Design Excellence in 2010. Clint has become a sales success due to its Scandinavian simplicity, good ergonomics and comfort.Clint is a thorough chair system with a wide range of options that cover the needs for seating furniture from the lounge areas to the boardroom. Clint is a chair family where all designs bear the family resemblance for a coherent interior design. Numerous possibilities for the choice of fabric / leather, various bases, armrests and low or high back makes for the perfect conference chair.

The Senso sofa system is designed by Andersen & Voll. The idea behind Senso is to design a modular sofa system that is flexible, space efficient and facilitates informal meetings between people. The Senso sofa system takes into account the acoustic challenges that one often has in office environments. The modular system stands out due to its space efficiency and its large number of modules that provides creative solutions. The height of the modules meets the requirements for universal design. The design of the base facilitates easy cleaning. Senso seat consists of steel frame with Nozag spring and cold cured foam. Back consists of plywood with cold cured foam. Senso side table has tabletop with 6 mm compact laminate in light or dark gray with black core. Base in polished aluminium, black (RAL 9005) epoxy or white (Ral 9016) epoxy. Epoxy in other colours on request. Base to be mounted. Felt gliders.

Ovo is a multifunctional reception desk dedicated to small rooms or customer service bureaus. Due to a lowered desk top it is easy to communicate with a client in a sitting position. The common part of the desk top allows to deal with documents easily and provides trouble-free communication. The lifted part of the reception desk includes a hidden computer stand and the vertical shelf for files and documents. Apart from ergonomics the Ovo reception desk offers an interesting form connecting a white oval of the desk top with a dark rectangle of the body and the frontal part of furniture produced in two optional colors - cocoa and chestnut.

LED spotlight 31 x 14.5 x 3 cm: Spotlight: 230 V, 1 x 4 W, class II, IP44, Energy efficiency class A++ Comfrot: LED lighting provides high luminosity, quality color and instant on. Economical: LED lightbulbs offer 60 to 90% savings compared to incandescent lightbulbs with sodium and mercury, and 10 to 20% compared with energy-saving lightbulbs Safety: LED lightbulbs operate on low voltage (< 32v) and generate little heat, thus enhancing safety of installation and use Maintenance: LED lighing reduce replacement costs, due to long lifetimes (on average over 50,000 hours)

Ditec Valor is the top of the range in Entrematic's offering. It's a high-tech, exceptionally well designed sliding door operator featuring operating speeds of up to 1.6 m/s (2 wings) and door weights of up to 240 kg (2 wings). It's extreme reliability (tested up to 3 million cycles) and safety is TÜV approved. Ditec Valor has gained a leading position in the marketplace thanks to its advanced technology, electromechanical components, innovative Control Unit which make it perfect for everyday use or for heavy-duty and continuous use applications such as in public areas, large shopping centres, airports, etc. Ditec Valor is very quiet due to its vibration proof sliding guide. The product complies with all European directives and EN 16005.

Plasterboards can be used to the construction of interior and exterior walls. They are of particular use in the repair of all types of buildings. The surface of the drywall is smooth and forms a perfect base for further finishing works. Plasterboards can be fixed to the wall with plasterboard adhesive or directly on the steel framework using steel partitions. By using plasterboard it is possible to increase the protection for fire resistance of the load-bearing walls of the building up to EI120 class. Building such constructions with an additional layer of mineral wool increases the acoustic and thermal insulation of the external walls. The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room. Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation. A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

Due to a force of 400 N in a very compact housing of just 35 x 24 mm (W x H), KS4 chain drives are currently the most powerful NSHEV drives of this class in the international market. The new and unique, on both sides mounted connector solution allow a series connection of up to three drives and a locking drive. The direct mounting without consoles as well as the M-COM for self-learning configuration in multi-drive systems greatly simplify the installation. The integrated microprocessor can communicate via data bus with control units of AUMÜLLER. In the context of modern façade automation systems, different situational speeds and forces can thus be driven. [LIST] Electronic speed control for smooth motor running Low noise due to vibration-bearing motor Suitable for surface mounted drives and concealed fitting within profiles Universal brackets and casement brackets for all common profile systems Sidebow roller chain of high-quality stainless steel with recessed rivets heads, for large opening angles with the smallest possible bending radii Chain completely retracts into the housing to ease profile integrated mounting of the drives Programmable feedback contact for end positions "CLOSED" or "OPEN" Two-sided connector for connecting cable, protected against polarity reversal M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation Z-version: programmable feedback limit position “OPEN” or “CLOSE” Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Reversing the direction in overload cut-off during the shift Rebate control M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Reversing the direction in overload cut-off during the shift Rebate control M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation TWIN- or D-type version with 2 chains and double force Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Rebate control Reversing the direction in overload cut-off during the shift M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation TWIN- or D-type version with 2 chains and double force Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Reversing the direction in overload cut-off during the shift Rebate control M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

A thick coat, EPS-insulation, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Collection alsecco also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certain projects only stone is the option due to planning restrictions or just to create the architect’s vision. Alsecco can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

A thick coat, mineral wool, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Collection alsecco also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certainprojects only stone is the option due to planning restrictions or just to create the architect’s vision. Alsecco can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

This BIM object for shower channels CeraLine F contains eight different lengths (500, 600, 700, 800, 900, 1000, 1100 und 1200 mm) and cover plates in different colours and surface finishes. The CeraLine F shower channel can be installed at any point in the floor surface, the flow capacity is 0,8 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

The KS 430 offers modern design and excellent comfort combined with high-quality technology: · More light through large-scale glazings · Soft/lift as standard for easy operation · Available up to 5800 x 2800 mm · Narrow sliding frames and frameless side elements · Easy operation of sash up to 400 kg sash weight · Energy efficient and heating cost saving · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

Best performance for facade insulation with thin insulation boards: Just 10 cm thick with a Lambda of 0.024 W/mK the Dalmatiner-Fassadendämmplatte S 024 allows to achieve the strict stipulations of the relevant German energy-saving regulation “EnEV 2009”: High insulating performance combined with a slimline wall structure facilitates attractive facade designs.Unattractive small window holes - caused by thick insulation boards to avoid thermal bridges - are quite back numbers. Details of joints to attached elements are easy and cost-efficient to realise due to the slim insulation board.

A thick coat, EPS-insulation, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. collection also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certain projects only stone is the option due to planning restrictions or just to create the architect’s vision. Caparol can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

A thick coat, mineral wool, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. collection also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certain projects only stone is the option due to planning restrictions or just to create the architect’s vision. Caparol can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

Range 801 Toilet brush unit - long brush handle with ergonomic handle grip and brush head made of black polyamide - cone-shaped container with large opening - brush head can be replaced due to bayonet fixing - brush is self-centring when put into container and stands upright automatically - with internal reservoir for disinfectant - container is removable - for wall mounting - 575 mm high, 130 mm wide and 140 mm deep - made of high-quality polyamide in selected HEWI colours

Range 802 LifeSystem White Edition Comfort hinged seat - ergonomically shaped seat with backrest - used for safe sitting in the shower area - seat weight capacity up to 150 kg - seat easy to fold up and down (locks in upper position) - space saving - 444 mm wide, 420 mm high, 455 mm deep - seat 444 mm wide, 380 mm deep - seat height adjustable to four levels from 420 mm to 510 mm (every 30 mm) - easy to install due to separate fixing of HEWI wall plate and seat - concealed, non-corrosive HEWI fixing material for different wall systems - seat and backrest made of high-quality PUR in the two HEWI colours 98 (signal white) and 99 (pure white) - seat with hygienic opening and water run-off - hinge made of white powder-coated aluminium with highly polished chrome design features - armrests can be retrofitted - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements

System 800 K Rail with shower head holder - vertical rail with supports perpendicular to the wall and roses, with shower head holder - made of high-quality polyamide in HEWI colour 98 (signal white) or 99 (pure white) - shower head holder with black gripping zone - with continuous, corrosion resistant steel core - outside dimension 1100 mm - rail diameter 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - shower head holder can be continuously tilted and, after pulling or pushing a large lever, its height can be adjusted - conical adapter on shower head holder makes it easier to hook in the handheld shower head - suitable for shower heads of various manufacturers - easy installation due to individually installed mounting plates made of high-quality stainless steel for hanging the shower head rail - including non-corrosive HEWI fixing material.

Rail with shower head holder - vertical rail with supports perpendicular to the wall and roses, with shower head holder - made of metal, high-quality chrome-plated - outside dimension 1100 mm - square profile 25 x 25 mm with large radii, 85 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat, square roses - roses 80 x 80 mm, 10 mm high - cubic shower head holder with 95 mm long function lever for easy use - shower head holder continuously adjustable, suitable for various makes of handheld showers - easy installation due to individually installed mounting plates made of high-quality stainless steel for hanging the shower head rail - fixing with grub screw located on the underside of the rose - including non-corrosive HEWI fixing material

System 800 K Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of high-quality polyamide in HEWI colours 98 (signal white) or 99 (pure white) - with continuous, corrosion resistant steel core - length 600 mm, diameter of rail 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - suitable for HEWI hanging seats 950.51...10..., 950.51...11..., 802.51...11..., 802.51...12... and 801.51... - including non-corrosive HEWI fixing material.

Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of metal, high-quality chrome-plated - outside dimension 600 mm - square profile 25 x 25 mm with large radii, 85 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat, square roses - roses 80 x 80 mm, 10 mm high - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - fixing with grub screw located on the underside of the rose - suitable for HEWI hanging seats 950.51...15..., 950.51...16..., 802.51...15... and 802.51...16... - including non-corrosive HEWI fixing material

<p>LUNDHS Marina is recognized by its large steel blueish feldspar crystals on a grey background. LUNDHS Marina is a 100% natural material, quarried from the mountain, then refined into tiles with a selection of finishes and sizes suitable for walls. Natural stones from Lundhs are high performance products with an unique appearance. LUNDHS Marina has no gloss reduction or colour discoloration from repeated cleaning or exposure to sun or temperature.  It is recommended for highly trafficated areas, due to extreme scratch resistance and close to 0% absorption with no staining issues.</p> <p>Available in four different surface finishes</p> <p>* Polished (a smooth glossy surface)  <br>* Caress (a light textured glossy surface)  <br>* Honed (a smooth matte surface)  <br>* Silk (a textured matte surface)  </p>

<p>LUNDHS Ocean has a grey-green background with small blueish feldspar crystals. </p><p>LUNDHS Ocean is a 100% natural material, quarried from the mountain, then refined into tiles with a selection of finishes and sizes suitable for walls. Natural stones from Lundhs are high performance products with an unique appearance. LUNDHS Ocean has no gloss reduction or colour discoloration from repeated cleaning or exposure to sun or temperature.  It is recommended for highly trafficated areas, due to extreme scratch resistance and no staining issues.</p> <p>Available in four different surface finishes: </p> <p>* Polished (smooth, glossy)</p> <p>* Honed (smooth matte)</p> <p>* Caress (textured, glossy) </p> <p>* Silk (textured, matte)</p>

LUNDHS Blue is a pure natural stone with multi-purpose flooring use. It is a 100% natural material, quarried from the mountain, then refined into tiles with a selection of finishes and sizes suitable for flooring . Natural stones from Lundhs are high performance products with an unique appearance. LUNDHS Blue has no gloss reduction or colour discoloration from repeated cleaning or exposure to sun or temperature. LUNDHS Blue is known as the original Blue Pearl, characterized by it’s medium-sized, blue feldspar crystals. It is recommended for highly trafficated areas, due to extreme scratch resistance and close to 0% absorption with no staining issues. Available in six differentsurface finishes * Polished (a smooth glossy surface) * Caress (a light textured glossy surface) * Honed (a smooth matte surface) * Silk (a textured matte surface) * Flamed (a rough textured surface with lighter colour, no gloss) * Waterjet (a textured surface with medium colour, no gloss)

<p>LUNDHS Marina is recognized by its large steel blueish feldspar crystals on a grey background. LUNDHS Marina is a natural stone with multi-purpose flooring use. It is a 100% natural material, quarried from the mountain, then refined into tiles with a selection of finishes and sizes suitable for flooring . Natural stones from Lundhs are high performance products with an unique appearance. LUNDHS Marina has no gloss reduction or colour discoloration from repeated cleaning or exposure to sun or temperature.  It is recommended for highly trafficated areas, due to extreme scratch resistance and close to 0% absorption with no staining issues.</p> <p>Available in six differentsurface finishes</p> <p>* Polished (a smooth glossy surface) <br>* Caress (a light textured glossy surface) <br>* Honed (a smooth matte surface) <br>* Silk (a textured matte surface) <br>* Flamed (a rough textured surface with lighter colour, no gloss) <br>* Waterjet (a textured surface with medium colour, no gloss)</p> <p><br></p>

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

White Pirineo Glazed sets the white difference in façades due to its versatility and adaptability to the environment. A set of brights makes the building an "artistic expression". La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Specchio contenitore con due ante asimmetriche 600x700x172 mm. Connect Space

Two operating modes in one device A compact device with a twin function: the new movement / presence detector for automatic switching of the lighting, dependent on brightness and movement. It is persuasive due to its excellent detection properties (360° detection range) at mounting heights up to six metres. The movement / presence detector has three independent PIR sensors for movement detection. Each of these sensors is assigned to an individually activated range (each with a detection angle of 120°). In addition the detection range can be considerably extended by grouping up to five devices. It is therefore possible to adapt the device to the room conditions or to the specific application. Due to the integrated brightness sensor, the device can also be used as a twilight switch.

This BIM object for shower channels CeraLine Nano F contains eight different lengths (500, 600, 700, 800, 900, 1000, 1100 und 1200 mm) and cover plates in different colours and surface finishes. The CeraLine Nano F shower channel can be installed at any point in the floor surface, the flow capacity is 0,46 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine Nano W contains eight different lengths (500, 600, 700, 800, 900, 1000, 1100 und 1200 mm) and cover plates in different colours and surface finishes. The CeraLine Nano W shower channel can be installed directly at wall, the flow capacity is 0,46 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine vertical F contains eight different lengths (500, 600, 700, 800, 900, 1000, 1100 und 1200 mm) and cover plates in different colours and surface finishes. The CeraLine vertical F shower channel can be installed at any point in the floor surface, the flow capacity is 0,8 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine F Flex contains eight different lengths (500, 600, 700, 800, 900, 1000, 1100 und 1200 mm) and cover plates in different colours and surface finishes. The CeraLine F Flex shower channel can be installed at any point in the floor surface, the flow capacity is 0,8 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

<p>Bison Trays integrate seamlessly with Bison Cubes and Deck Systems. Instead of installing a wood tile or paver, set a Bison Rock Tray in its place to add dimension and texture to deck areas. <em>Note: The digital images displayed have the most accurate color possible. However, due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and your screen.</em></p> <p><strong>FEATURES</strong><br></p> <ul><li>Lightweight and exceptionally durable aluminum construction</li><li>Custom sizes available</li><li>Maintenance free</li><li>Typically contain 20% recycled content and are 100% recyclable</li><li>Finished with Low VOC powder-coat paints and sealants</li><li>Made in the USA.</li></ul> <p><br></p>

<p>Planter. Seating. Storage. With modular Bison Cubes, the choice is yours! Bison Cubes make it easy to design a comfortable and beautiful environment. Bison Cubes integrate seamlessly with Bison Deck Systems. Instead of installing a wood deck tile, set a Bison Cube in its place for use as a planter or add a Bison Ipê Cube Top for seating and storage. <em>Note: The digital images displayed have the most accurate color possible. However, due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and your screen.</em><br></p> <ul><li>Commercial grade aluminum Cubes</li><li>Handcrafted of never-rust .090 marine-grade aluminum (3/32″ thick) </li><li>Custom sizes, materials, and colors available</li><li>Maintenance free</li><li>Typically contain 20% recycled content and are 100% recyclable</li><li>Finished with Low VOC powder-coat paints and sealants</li><li>Drain holes and irrigation sleeves included</li><li>Warranty: Limited 5 year warranty on cube structure and powder coated finishes available</li><li>Can contribute to LEED points</li><li>Made in the USA</li></ul>

[LIST] 34 exclusive colours for acoustic ceiling and wall solutions to inspire and enhance your interior design scheme. Subtle to bold long lasting colours, arranged in six themes. Total design freedom due to exposed, semi-concealed and concealed edges in a large variety of module sizes. [/LIST]

<p><strong>Fast and robust</strong></p> <p> Due to the horizontal folding movement of the high-speed folding doors, the full clearance height is immediately completely free. Doors of the F series open with high speeds and are extremely heavy-duty. They protect against noise and draft air, save energy and convince with good heat and sound insulating properties.</p> <p><strong>Individual design </strong><br>High-speed folding doors by EFAFLEX which are mainly used for closing whole buildings are one aspect of modern industrial architecture. Thanks to the large number of design possibilities, your high-speed folding door can be adjusted to every façade</p> <p><strong>List of door types for downloading:</strong></p> <ul><li>SFT-L </li><li>SFT-S </li><li>SFT-ÜS </li></ul> <p>Please note: For detailled mounting space of the different door types please use our consulting service.</p> <p>EFAFLEX reserves the right to continually develop product and technical specifications. To obtain optimum results we recommend you only work and plan with the latest version of BIMobjects data confirming product and/or specification availability prior to project commencement.  </p> <p><br></p>

Ditec Valor is the top of the range in Entrematic's offering. It's a high-tech, exceptionally well designed sliding door operator featuring operating speeds of up to 1.6 m/s (2 wings) and door weights of up to 240 kg (2 wings). It's extreme reliability (tested up to 3 million cycles) and safety is TÜV approved. Ditec Valor has gained a leading position in the marketplace thanks to its advanced technology, electromechanical components, innovative Control Unit which make it perfect for everyday use or for heavy-duty and continuous use applications such as in public areas, large shopping centres, airports, etc. Ditec Valor is very quiet due to its vibration proof sliding guide. The product complies with all European directives and EN 16005.

The Acrylicon Multi-Grip System is an industrial mono-colour system which can be elasticised for areas with high thermal and mechanical stresses and outdoor applications. The thickness of the system is 2-4mm. The system is suitable for car parks, walkways and ramps due to the integral slip resistance. Fibreglass arming can be installed within the system for added protection against movement cracking. Designed for use in outdoor and indoor areas where the temperature can vary. The elasticity and low temperature flexibility improves the performance in outdoor applications such as exterior parking decks, exterior walk ways (airports and vestibule walk off areas where salt is often used), safety marking zones and mezzanine metal gantries.

The Acrylicon Industry System is a trowel applied mortar system with an excellent compressive strength and tensile strength in bending. It is characterised by very low linear shrinkage, high wear resistance and unparalleled longevity. Due to Acrylicon’s unique ability to chemically bond it can be combined with other Acrylicon Systems to provide a decorative finish. The cure time is under 2 hours, even at temperatures down to -25°C, meaning any downtime is reduced to a minimum. Designed to withstand heavy duty mechanical stress, both indoor and outdoor. Suitable for use in offshore applications, heavy engineering, freezers and as a heavy duty screed (up to 550mm thickness) for other Acrylicon Systems.

The Acrylicon Wall System is an extremely durable, hygienic and long lasting wall covering containing decorative flakes or quartz within a chemically bonded resin system. It is easy to apply and coupled with a 2 hour cure time, it can be installed in a fraction of the time when compared to traditional wall cladding and tile systems. Due to Acrylicon’s unique ability to chemically bond it can be fused with Acrylicon Floor Systems to provide a truly monolithic “floor to ceiling“ interface. Designed to be used on walls in changing rooms, showers, toilets, wet rooms, food processing areas, hospitals, pharmaceutical industries, public areas, abattoirs, breweries, bakeries and many other areas requiring a hygienic and easy to clean surface.

ALUCOBOND® riveted system = rear ventilated facade system: A recommended flat panel installation for vertical or horizontal panel layout with visible fixing of the flat panels. The panels are fixed with rivets on a aluminium subframe system. ALUCOBOND® is the world market leader for aluminium composite panels. Since its introduction on the market in 1969, these panels have been used above all in architecture and for corporate identity programmes, particularly for façades, wall and roof cladding. The panels are outstanding due to their extreme flatness and rigidity and, in particular, for their excellent formability with simple fabrication techniques. ALUCOBOND® combined with a rear-ventilated construction system unites the features of energy efficient construction, economic viability and architectural quality. ALUCOBOND® is available in a large variety of colours, surfaces and formats. In terms of Fire Classification it is available in Class A2 (noncombustible) or alternatively in Class B (fire-retardant) acc. to EN 13501-1.

ALUCOBOND® hooked-on system = rear ventilated facade system: A recommended tray panel / cassette system for vertical panel installation with unvisible fixing of the tray panel elements. ALUCOBOND® is the world market leader for aluminium composite panels. Since its introduction on the market in 1969, these panels have been used above all in architecture and for corporate identity programmes, particularly for façades, wall and roof cladding. The panels are outstanding due to their extreme flatness and rigidity and, in particular, for their excellent formability with simple fabrication techniques. ALUCOBOND® combined with a rear-ventilated construction system unites the features of energy efficient construction, economic viability and architectural quality. ALUCOBOND® is available in a large variety of colours, surfaces and formats. In terms of Fire Classification it is available in Class A2 (noncombustible) or alternatively in Class B (fire-retardant) acc. to EN 13501-1.

ALUCOBOND® SZ20 (tongue & groove ) system = rear ventilated facade system: A recommended tray panel / cassette system for horizontal layout with unvisible fixing of the tray panel elements. ALUCOBOND® is the world market leader for aluminium composite panels. Since its introduction on the market in 1969, these panels have been used above all in architecture and for corporate identity programmes, particularly for façades, wall and roof cladding. The panels are outstanding due to their extreme flatness and rigidity and, in particular, for their excellent formability with simple fabrication techniques. ALUCOBOND® combined with a rear-ventilated construction system unites the features of energy efficient construction, economic viability and architectural quality. ALUCOBOND® is available in a large variety of colours, surfaces and formats. In terms of Fire Classification it is available in Class A2 (noncombustible) or alternatively in Class B (fire-retardant) acc. to EN 13501-1.

Inward opening highly thermally insulated door system [LIST] Outstanding insulation with basic depth of: outer frame: 90 mm, leaf frame: 100 mm Weathertigtness and reistance to driving rain in accordance with DIN EN 12208 up to 300 PA, due to the use of a continuous centre gasket Leaf heights up to 2500 mm and leaf widths up to 1400 mm Burglar resistance up to WK2 in accordance with DIN V ENV 1627 High thermal insulation up to Uf = 1.4 W/m2K Design: inward opening face-fitted and Soft Line Easily integrated convenience features and security functions: easy-access door, access control, video camera [/LIST]

Inward opening highly thermally insulated window façade [LIST] Uf value = 1.4 W/(m²K) for 82 mm face width New centre gasket with additional hollow chamber, fins and a new combination of materials which is easier to fabricate Graduated mullion, transom and outer frame options in Residential Line look Large spans due to extensive range of structural mullions Wide variety of design options provided by comprehensive range of profiles and cover caps Efficient solution for ribbon windows Benefit of unitised frame fabrication compared with façade units Concealed Schüco AvanTec system fitting up to 160 kg Burglar resistance up to WK2 (RC 2) in accordance with DIN V ENV 1627 [/LIST]

Inward opening composite window system [LIST] Outstanding, scalable thermal insulation due to innovative insulation concept with a U, value from 0,85 W/(m²k) Increased sound reduction due to double centre gasket level and multi-pane principle up to Rw 53 dB Improved reduction of condensation due to controlled ventilation of the space between the panes Integrated Schüco CCB solar shading, concealed installation Reduced heat transfer due to installation of the Schüco composite Venetian blind with no thermal bridging Concealed blind guidance, no light penetration from the side Tool-free clip installation of the ready-to-use Schüco composite Venetian blind Simplified electrical interface due to pre-assembled plugs (Plug and Play) Outer vent with structural glazing look also available [/LIST]

The EMX-8 weather centre unit combines the core and the sensors of the Griesser KNX control in a single unit. The central unit offers flexible and extensive options for the solar shading automation of small to large systems, especially in residential construction. The advantage lies in the central configuration and administration of all important automatic programs using ETS. This makes it easy to set interdependencies dealing with automatic timing or shading. Programming and commissioning are quick, secure and simple due to the communication with the motor control via the Griesser object. The Griesser object links the central unit with all motor controls via a group address.

The PURMO Plan Compact panel radiators stand out due to their completely flat front panel. The panel is glued to the profiled front, base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with side covers and a top grille. Four G ½" threaded female connectors allow for side connection on both right and left side.

The versatile PURMO Plan Ventil Compact panel radiators stand out due to their completely flat front panel. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing presetting.

The PURMO Ramo Compact panel radiators with side connectors stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with side covers and a top grille. Four side G ½" threaded female connectors allow for side connection on both right and left side.

The versatile PURMO Ramo Ventil Compact panel radiators stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting.

The PURMO Plan Ventil Compact M panel radiators with mid-bottom connectors stand out due to their completely flat front panel. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two mid-bottom and four side G ½" threaded female connectors allow for central bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting. The main advantage of the central bottom connection relies of the fact that regardless of the length, height and depth of the radiator, the layout of heating system connections can be defined at the building shell stage and it will not change as a result of the selection of a specific size and type of the radiator.

The PURMO Ramo Ventil Compact M panel radiators with mid-bottom connectors stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two mid-bottom and four side G ½" threaded female connectors allow for central bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting. The main advantage of the central bottom connection relies of the fact that regardless of the length, height and depth of the radiator, the layout of heating system connections can be defined at the building shell stage and it will not change as a result of the selection of a specific size and type of the radiator.

"Kesäyö" which means summer night, is a modern, bright sauna door that takes the bathroom to a new level. The hazy softness of the door is due to the gradient white surface of the door. You can peek into the sauna from the round opening which has clear glass, framed with a light grey dotted line. All sauna doors could be combined with a range of wood frames.

"Kesäyö" which means summer night, is a modern, bright spa door that takes the spa room to a new level. The hazy softness of the door is due to the gradient white surface of the door. All spa doors could be combined with a range of wood frames.

Stopsol – Stopsol is a brand recognised for its stunning aesthetics due to its combination of brilliant coatings and extended range of coloured glass. This range of solar control hard-coated glass (type A following EN 1096) delivers good light and energy performances, ensuring the privacy and comfort of people inside the building and reducing air-conditioning costs due to its low solar factor. Every Thermobel insulating glazing product is CE certified for use in buildings and follows AGC Glass Europe’s ‘green strategy’ of being Cradle-to-Cradle Certified TM Bronze.

The versatile Radson Integra Parada panel radiators stand out due to their completely flat front panel. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in Danfoss thermostatic valve insert providing presetting.

The versatile Radson Integra Ramo panel radiators stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in Danfoss thermostatic valve insert providing pre-setting.

The combination of smoking and white oil gives this single-strip oak floor from the Grande Collection a dusky blue finish with pale ashen highlights in the pores. The colour variation between boards is very apparent due to the fully smoked planks. Every board is carefully brushed to bring out the character of the grain and highlight the natural texture of the wood. Four-sided bevelling at the edges ensures a classic, full plank look and feel. Each board is meticulously hand-scraped, which enhances the rustic appearance of the floor.

The KS 430 offers modern design and excellent comfort combined with high-quality technology: · More light through large-scale glazings · Soft/lift as standard for easy operation · Available up to 5800 x 2800 mm · Narrow sliding frames and frameless side elements · Easy operation of sash up to 400 kg sash weight · Energy efficient and heating cost saving · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

The KS 430 offers modern design and excellent comfort combined with high-quality technology: · More light through large-scale glazings · Soft/lift as standard for easy operation · Available up to 5800 x 2800 mm · Narrow sliding frames and frameless side elements · Easy operation of sash up to 400 kg sash weight · Energy efficient and heating cost saving · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

The HS 330 offers unique design and exceptional comfort, combined with high-quality technology: · More light through large-scale glazings · Available up 580 0 x 2800 mm · Narrow sliding frame and frameless side elements · Easy lifting and sliding of sash up to 400 kg sash weight · Energy efficient and heating cost saving · Low heat emission due to triple glazing · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

The HS 330 offers unique design and exceptional comfort, combined with high-quality technology: · More light through large-scale glazings · Available up 580 0 x 2800 mm · Narrow sliding frame and frameless side elements · Easy lifting and sliding of sash up to 400 kg sash weight · Energy efficient and heating cost saving · Low heat emission due to triple glazing · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

Developed with the sole purpose of keeping people safe, Stratobel is our extended range of laminated glass which looks identical to normal glass, but is strong enough to provide protection from injury, falls and break-ins and vandalism. Transparent protection is provided by a polyvinyl butyral (PVB) interlayer, a plastic material placed between two sheets of glass. Subjected to many forms of impact and tests, varying thicknesses of glass and configurations determine the level of safety. By applying layers of specific PVB, specific tinted float and glass coatings, functionality can be added on top of the safety components. The three main functions of this range are: Protection from injury – tested and certified in compliance with EN 12600(Class: 1B1 - 2B2) If this glass breaks, it shatters into blunt fragments which stick to the PVB rather than sharp pieces. For bus shelters, doors, windows, balconies, skylights and any overhead glazing, this glass, which includes two sheets of glass and at least one PVB interlayer, reduces the risk of injury due to accidental impact. Protection from falls - tested and certified in compliance with EN 12600 (Class: 1B1) Whenever there is a risk of falling through glass, for example, ceiling-to-floor windows, balustrades and banisters, this glass, which includes two sheets of glass and at least two PVB interlayers, prevents falls as the glass stays together – even when accidentally broken. Protection against break-ins and vandalism - tested and certified in compliance with EN 356. (Class: P1A-P5A) Windows are a potential entry point for burglars, but this glass, which includes two sheets of glass and at least two PVB interlayers, resists forced entry threats and intrusion. Tested with a metal ball drop, this method evaluates the performance with three levels of impact from small-scale manual attacks to intentional break-ins.

As the most famous coated glass in the world, Stopsol is a brand recognised for its stunning aesthetics due to its combination of brilliant coatings and extended range of coloured glass. This range of solar control hard-coated glass (type A following EN 1096) delivers good light and energy performances, ensuring the privacy and comfort of people inside the building and reducing air-conditioning costs due to its low solar factor. Moreover, this product can be used in a number of different ways: as monolithic glass (tempered or not tempered), as laminated glass or bent glass, as double or triple glazing, resulting in the highest level of freedom in processing and design. •Guarantees a high level of privacy thanks to its reflective coating. •Infinite shelf-life allows for long-term storage. •Limitless creativity for architects: one type of glass for all applications. •A far-reaching range of different and beautiful aesthetics thanks to a combination of three different reflective coatings with a large range of coloured glass.

As the most famous coated glass in the world, Stopsol is a brand recognised for its stunning aesthetics due to its combination of brilliant coatings and extended range of coloured glass. This range of solar control hard-coated glass (type A following EN 1096) delivers good light and energy performances, ensuring the privacy and comfort of people inside the building and reducing air-conditioning costs due to its low solar factor. Moreover, this product can be used in a number of different ways: as monolithic glass (tempered or not tempered), as laminated glass or bent glass, as double or triple glazing, resulting in the highest level of freedom in processing and design. •Guarantees a high level of privacy thanks to its reflective coating. •Infinite shelf-life allows for long-term storage. •Limitless creativity for architects: one type of glass for all applications. •A far-reaching range of different and beautiful aesthetics thanks to a combination of three different reflective coatings with a large range of coloured glass.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 12 x 70 cm format is mostly used along the Spanish Mediterranean coast, where it fits perfectly the constructive needs of the area.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] Versatile and easy to use.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 20x70 cm format is a great choice for medium-depth slabs, and it is easy to use.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 22x70 cm format is a great choice for medium-depth slabs, and it is easy to use.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 25 x 70 cm infill block is especially recommended for deep slabs with high mechanical resistance requirements.

This product is only available for the Swedish market. The Alterna Basic Shower Cabinet is delivered in 3 parts: cabinets, rear panel and sliding doors that are quickly assembled by one person. The feet are adjustable and the front of the cabinet is removable for easy cleaning under the cabin. Water trap, shower set, soap holder and mirror are included in the shower cabinet. The Alterna Express Shower Cabinet has silver-colored aluminum profiles, 4 mm hardened safety glass and acrylic tub. Clear glass in doors and side panels. The shower cabinet comes with a shower panel and shower set. Size: H 2 150 x B 900 x D 900 mm. The shower cabinet can be ordered with or without the Mora MMIX thermostatic mixer. Due to its construction, the shower cabinet is very fast to install, and the walls are self-standing, allowing one person to mount it. The assembly is done without tools.

This product is only available for the Swedish market. The Alterna Basic Shower Cabinet is delivered in 3 parts: cabinets, rear panel and sliding doors that are quickly assembled by one person. The feet are adjustable and the front of the cabinet is removable for easy cleaning under the cabin. Water trap, shower set, soap holder and mirror are included in the shower cabinet. The Alterna Express Shower Cabinet has silver-colored aluminum profiles, 4 mm hardened safety glass and acrylic tub. Clear glass in doors and side panels. The shower cabinet comes with a shower panel and shower set. Size: H 2 150 x B 900 x D 900 mm. The shower cabinet can be ordered with or without the Mora MMIX thermostatic mixer. Due to its construction, the shower cabinet is very fast to install, and the walls are self-standing, allowing one person to mount it. The assembly is done without tools.

If you recognize something about the K2 Chair it might be due to the fact that you at some point during your school years sat in Friis & Moltkes model 6000 and struggled with words like proportionality and perfectum participium. Because the K2 Chair is a refinement of the classic school chair model 6000 which Friis & Moltke designed back in the 60’s. Back then the chair sold more than 500.000 copies. The K2 Chair can very well be used in both the class room and the conference room. Furthermore the chair is highly stackable since 50 chairs can be stacked in just 1 metre. If you look closely you’ll notice that the base of the K2 Chair consists of just one pieces of 12 mm steel rod that is brought all the way around. This method creates very round edges that soften the sharp and geometric look. The base is made out of powdercoated steel rod whereas the seat comes in blackstained ash, in oak or with upholstery in various colours.

Double-shell brickwork – at the inside with Ytong and at the outside with Silka: If the matter is an outer shell with heavy-duty weatherproofing, you traditionally stick to a well approved double-shell brickwork. The outer shell – the Silka faced brickwork – meets structural-physical demands as well as high mechanical requirements. Due to the facade’s persistence and low amount of maintenance, those double-shell brickworks pay off fine in the long run. Between the bearing inner Ytong-shell and the weather-resistant outer Silka-shell, there’s room for additional functional layers.

Ytong AAC convinc with its sophisticated and well matched construction systems and the use of pre-fabricated products where they are most utilized. High quality primary products sand, lime, water, cement and the energy-saving fabrication of those stand for a high grade of environmental sustainability. Builder-owners benefit from the special advantages of solid constructions throughout the whole average life. This is not only due to the comfort as a result of the high grade of thermal protection in wintertime and on the other hand a pleasant cool indoor climate in summertime, but it also ensures the clinical safety of the building materials on mineral basis, certified by several approved institutes. Contaminant-free habitation, protection against electromagnetic pollution and other environmental influences as well as the use of non-combustible building materials assures secureness for your whole family and the conservation of value of your capital investment. Benefits: • Pure building materials on mineral basis • Clinical safety • Construction components can be cropped accurately • Improved thermal conductivity due to tiny air spaces

Ytong AAC convinc with its sophisticated and well matched construction systems and the use of pre-fabricated products where they are most utilized. High quality primary products sand, lime, water, cement and the energy-saving fabrication of those stand for a high grade of environmental sustainability. Builder-owners benefit from the special advantages of solid constructions throughout the whole average life. This is not only due to the comfort as a result of the high grade of thermal protection in wintertime and on the other hand a pleasant cool indoor climate in summertime, but it also ensures the clinical safety of the building materials on mineral basis, certified by several approved institutes. Contaminant-free habitation, protection against electromagnetic pollution and other environmental influences as well as the use of non-combustible building materials assures secureness for your whole family and the conservation of value of your capital investment. Benefits: • Pure building materials on mineral basis • Clinical safety • Construction components can be cropped accurately • Improved thermal conductivity due to tiny air spaces

This BIM object for shower channels CeraLine F Duo contains thirteen different lengths (800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 und 2000 mm) and cover plates in different colours and surface finishes. The CeraLine F Duo shower channel can be installed at any point in the floor surface, the flow capacity is 1.4 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine W Duo contains thirteen different lengths (800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 und 2000 mm) and cover plates in different colours and surface finishes. The CeraLine W Duo shower channel can be installed directly at wall, the flow capacity is 1.4 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine Plan F Duo contains thirteen different lengths (800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 und 2000 mm) and cover plates in different colours and surface finishes. The CeraLine Plan F Duo shower channel can be installed at any point in the floor surface, the flow capacity is 1.2 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine Plan W Duo contains thirteen different lengths (800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 und 2000 mm) and cover plates in different colours and surface finishes. The CeraLine Plan W Duo shower channel can be installed directly at wall, the flow capacity is 1.2 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine Nano F Duo contains thirteen different lengths (800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 und 2000 mm) and cover plates in different colours and surface finishes. The CeraLine Nano F Duo shower channel can be installed at any point in the floor surface, the flow capacity is 0.82 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine Nano W Duo contains thirteen different lengths (800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 und 2000 mm) and cover plates in different colours and surface finishes. The CeraLine Nano W Duo shower channel can be installed directly at wall, the flow capacity is 0.82 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

This BIM object for shower channels CeraLine vertikal F Duo contains thirteen different lengths (800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 und 2000 mm) and cover plates in different colours and surface finishes. The CeraLine F Duo shower channel can be installed at any point in the floor surface, the flow capacity is 2.0 l/s. The multiple design award winning CeraLine shower channels are combinable with a large number of cover plates with interesting surface finishes and material combinations. Coloured glass, for example, to satisfy the most sophisticated of tastes. Or Polished or satin finished stainless steel for the most exclusive effects. The type Individual is prepared te be tiled with customer’s individual floor finish. Due to the small width of the cover plates shower channels CeraLine are always looking elegant and sophisticated.

The "LIGHTCHUTE" standard section of plastic rubble chutes attaches perfectly to sections with top hopper and to all other RUBI-KANGURO plastic chute accessories. The "LIGHTCHUTE" standard section is the main and major component of all "LIGHTCHUTE" plastic rubble chute columns. RUBI-KANGURO "LIGHTCHUTE" plastic rubble chutes are a very economical and safe option for transferring construction waste from high floors to containers at street level, and are particularly suitable for use in urban environments owing to their large dust and noise reduction capacities. The ease of use of RUBI-KANGURO "LIGHTCHUTE" plastic rubble chutes means that they are recommended for any construction work over several floors.  Made of high density polyethylene, and with walls of 6 mm thickness, RUBI-KANGURO "LIGHTCHUTE" plastic rubble chutes offer excellent impact resistance, due to their flexibility, and great durability. Owing to the ribbing inside RUBI-KANGURO rubble chutes, friction with the rubble is minimised and wear of the chute cone is reduced, thus extending the product’s lifespan. The chains of all the "LIGHTCHUTE" rubble chute models are extra-reinforced, with links of 6 mm in diameter, and they comply with the DIN 763 standard.  Because they are stackable, users save space in storage and they are easy to transport. RUBI has more than 65 years’ experience of manufacturing tools for the construction industry. During this long period of time, our products have earned the trust of millions of users around the world. Today, RUBI continues to design and manufacture new products to keep this trust at the highest level possible. Our brand, as well as our products, is synonymous with quality and satisfaction guarantee. Construction professionals trust us, and we therefore focus our efforts and our passion in all our products.

The RUBI-KANGURO "LIGHTCHUTE" plastic chute with top hopper should always be used as the first segment of the "LIGHTCHUTE" plastic rubble chute column.  The hopper of this "LIGHTCHUTE" rubble chute section is specially designed for easy loading of construction rubble by wheelbarrow, bucket or basket, or shovel. The RUBI-KANGURO "LIGHTCHUTE" plastic chute with top hopper can be used as intermediate or side hopper. It is ideal for facilitating a debris removal hopper at any point in the plastic chute column, and allowing construction professionals to access the plastic chute column from a balcony, a window or between intermediate floors. RUBI-KANGURO "LIGHTCHUTE" plastic rubble chutes are a very economical and safe option for transferring construction waste from high floors to containers at street level, and are particularly suitable for use in urban environments owing to their large dust and noise reduction capacities. The ease of use of RUBI-KANGURO "LIGHTCHUTE" plastic rubble chutes means that they are recommended for any construction work over several floors. Made of high density polyethylene, and with walls of 6 mm thickness, RUBI-KANGURO "LIGHTCHUTE" plastic rubble chutes offer excellent impact resistance, due to their flexibility, and great durability. Owing to the ribbing inside RUBI-KANGURO rubble chutes, friction with the rubble is minimised and wear of the chute cone is reduced, thus extending the product’s lifespan. The chains of all the "LIGHTCHUTE" rubble chute models are extra-reinforced, with links of 6 mm in diameter, and they comply with the DIN 763 standard.  Because they are stackable, "LIGHTCHUTE" plastic chutes allow users to save space in storage and are easy to transport.

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight Multipor external thermal insulation The Multipor thermal insulation composite system (ETICS) is the ideal solution for energy-efficient and sustainable insulation of exterior walls. Advantages: - Non-flammable from the base to the roof - no fire bolt - Full Mineral thermal insulation composite system - Protection against algae and fungi - without biocides - Solid and dimensionally stable - Woodpecker Safe - High compressive strength - density of up to 115 kg / m³ - physiologically harmless and 100% recyclable

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight Multipor external thermal insulation The Multipor thermal insulation composite system (ETICS) is the ideal solution for energy-efficient and sustainable insulation of exterior walls. Advantages: - Non-flammable from the base to the roof - no fire bolt - Full Mineral thermal insulation composite system - Protection against algae and fungi - without biocides - Solid and dimensionally stable - Woodpecker Safe - High compressive strength - density of up to 115 kg / m³ - physiologically harmless and 100% recyclable

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight Multipor external thermal insulation The Multipor thermal insulation composite system (ETICS) is the ideal solution for energy-efficient and sustainable insulation of exterior walls. Advantages: - Non-flammable from the base to the roof - no fire bolt - Full Mineral thermal insulation composite system - Protection against algae and fungi - without biocides - Solid and dimensionally stable - Woodpecker Safe - High compressive strength - density of up to 115 kg / m³ - physiologically harmless and 100% recyclable

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight Multipor external thermal insulation The Multipor thermal insulation composite system (ETICS) is the ideal solution for energy-efficient and sustainable insulation of exterior walls. Advantages: - Non-flammable from the base to the roof - no fire bolt - Full Mineral thermal insulation composite system - Protection against algae and fungi - without biocides - Solid and dimensionally stable - Woodpecker Safe - High compressive strength - density of up to 115 kg / m³ - physiologically harmless and 100% recyclable

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight

The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Verbundstein is suitable for all non-bearing, bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

System 162 Toilet brush unit - toilet brush unit consisting of bracket, toilet brush holder and brush - brush head can be replaced due to bayonet fixing - inner container can be removed for cleaning - made of stainless steel, satin finish - 89 mm wide, 440 mm high, 109 mm deep - for wall mounting, concealed fixing - including non-corrosive HEWI fixing material Article no.: HEWI 162.20.100XA

Range 477 Toilet brush unit - brush handle with replaceable brush head made of black polyamide - brush holder with curved bottom and spherical, semi-open top in ring-shaped bracket - top part can be rotated - container is removable, but can also be fitted to prevent theft - brush head can be replaced due to bayonet fixing - anti-theft protection through concealed screw fixing - 141 mm wide, 470 mm high and 140 mm deep - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.20.100

Range 805 Classic Toilet brush unit - brush handle with replaceable brush head made of black polyamide - brush holder with curved bottom and spherical, semi-open top in ring-shaped bracket - suspended brush - top part can be rotated - container is removable, but can also be fitted to prevent theft - brush head can be replaced due to bayonet fixing - anti-theft protection through concealed screw fixing - 141 mm wide, 470 mm high and 140 mm deep - container made of high-quality polyamide in HEWI colours 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) - holder and brush handle made of high-quality stainless steel, satin surface finish Article no.: HEWI 805.20.100

Range 805 Toilet brush unit - cubic body with recessed wall base - insert conical shaped and removable for cleaning - with inner reservoir for disinfectant - brush handle made of stainless steel, brush head easily replaceable due to bayonet fixing - 100 mm wide, container 285 mm high and 100 mm deep, wall-mounted base 10 mm - for wall mounting - made of high-quality stainless steel, satin surface finish - Insert made of high-quality polyamide in HEWI colours 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) Article no.: HEWI 805.20.200

Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of high-quality chrome-look coated polyamide that is warm to touch - with continuous, corrosion resistant steel core - length 300 mm, diameter of rail 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - fixing with grub screw located on the underside of the rose - including non-corrosive HEWI fixing material Article no.: HEWI 950.36.10050

Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of high-quality chrome-look coated polyamide that is warm to touch - with continuous, corrosion resistant steel core - length 400 mm, diameter of rail 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - fixing with grub screw located on the underside of the rose - suitable for HEWI hanging seat 802.51...11... and 802.51...12... - including non-corrosive HEWI fixing material Article no.: HEWI 950.36.11050

Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of high-quality chrome-look coated polyamide that is warm to touch - with continuous, corrosion resistant steel core - length 600 mm, diameter of rail 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - fixing with grub screw located on the underside of the rose - suitable for HEWI hanging seats 950.51...10..., 950.51...11..., 802.51...11..., 802.51...12... and 801.51... - including non-corrosive HEWI fixing material Article no.: HEWI 950.36.13050

Electronic washbasin fitting - high-quality chrome-plated, round - Flow rate 5 l/min - Mains operation 230 V - for cold and mixed water - Cold water: 3/8" T-distributor necessary, see accessories Art. No. 111736 - Laminar jet controller with dynamic flow control 5 l/min, angle adjustable and anti-theft protection - adjustable, active, nuisance tripping-resistant infrared sensors - Electronic module with adjustable sensing range, hygiene flushing, continuous flushing and cleaning mode - Sensor parameters preset in the factory: after-run time: approx. 1-2 s, continuous running: 4 min, sensing range: 200 mm, cleaning mode: 60 s, hygiene flushing is deactivated - asymmetrical sensing range, stable object detection - settings and service also possible by means of app via smartphone, see accessories Art. No. 65713 - safety shutdown in the event of failure of the operating voltage, user-defined settings are retained - without temperature adjustment lever: highly hygienic, vandal and misuse resistant - the preset temperature lies within the comfort zone from 30°C to 36°C - Temperature settings and adjustment can be easily made during installation due to side access - Connection via flexible pressure hoses with woven-in hot-cold marking 450 mm long, G 3/8" - integrated dirt trap screens - Brass fitting body - 118 mm high, projection 158 mm - rigid outlet - not including waste fittings - Noise class 1 - suitable for thermal disinfection according to DVGW W 551 - conforms EN 15091 - with WELL Label Article no.: HEWI AQ1.12S21040

System 162 push/pull handle set for equipping doors or emergency exits For emergency exits: Approval to EN 179 in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634 and 9 mm square spindle. Suitable as operating element on doors to DIN 18040, with accessibility function within operating range at 850 mm above FFL. Handle made of a stainless steel tube, diameter 30 mm, straight handle with straight connection, height 450 mm, width 124 mm, satin surface, backplates made of metal with polyamide cap, maintenance-free plain bearings, mechanical adjustment for the pull handle. Fast installation on the door due to already preassembled pull handles on the bottom section. Installation in pairs, function in opening direction - push, function in opposite direction - pull, with continuous spindle. Classification: spindle 8 mm - no classification spindle 9 mm Designed and tested for projects, classification to EN 179 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class 0, A or B Safety - personal protection: Class 1 Corrosion protection: Class 3 Security - burglary protection: Class 2 Projection of operating element: Class 1 Type of operation: B Field of door application: Class A, B, C or D The classification results only in connection with the lock according to EN 179, for example, BKS, Fuhr or Fliether The selected combinations are assigned freely and do not have to take on a lock manufacturer. For more information, contact HEWI or the lock manufacturer! Article no.: HEWI 162XADG06

System 111 push/pull handle set Handle made of polyamide, with steel core diameter 33 mm, closed oval, height 400 mm, width 105 mm, high polished, backplates made of metal with polyamide cap, maintenance-free plain bearings, mechanical adjustment for the pull handle. Fast installation on the door due to already preassembled pull handles on the bottom section. Suitable as operating element on doors to DIN 18040, with accessibility function within operating range at 850 mm above FFL. Contrasting design in coloured polyamide. Installation in pairs, function in opening direction - push, function in opposite direction - pull, with continuous spindle. Classification key: spindle 8 mm - no classification spindle 9 mm Designed and tested for projects, classification to EN 179 Category of use: Class 3 Durability: Class 7 Door weight: Class 6 Use on smoke/fire doors: Class 0. A or B Safety personal security: Class 1 Corrosion resistance: Class 3 Security: Class 2 Security - Burglary protection: Class 1 Type of operation: B Field of door application: Class A, B, C or D The classification results only in connection with the lock according to EN 179, for example, BKS, Fuhr or Fliether The selected combinations are assigned freely and do not have to take on a lock manufacturer. For more information, contact HEWI or the lock manufacturer! Article no.: HEWI FSDG550.08

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA10

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA20

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA30

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA40

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA10

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA20

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA30

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA40

ROD72 is the perfect meeting table for conferences, canteens, smaller meeting rooms and as a workdesk in informal environments. This is due to the build in split top that makes it easy to use ROD72 for bigger arrangements and meetings. This cable management can easily be opened and is perfect for computer wires. ROD72 is designed very functional so it is easy to put together as many meeting tables as you like.

ROD72 is the perfect meeting table for conferences, canteens, smaller meeting rooms and as a workdesk in informal environments. This is due to the build in split top that makes it easy to use ROD72 for bigger arrangements and meetings. This cable management can easily be opened and is perfect for computer wires. ROD72 is designed very functional so it is easy to put together as many meeting tables as you like.

ROD72 is the perfect meeting table for conferences, canteens, smaller meeting rooms and as a workdesk in informal environments. This is due to the build in split top that makes it easy to use ROD72 for bigger arrangements and meetings. This cable management can easily be opened and is perfect for computer wires. ROD72 is designed very functional so it is easy to put together as many meeting tables as you like.

ROD72 is the perfect meeting table for conferences, canteens, smaller meeting rooms and as a workdesk in informal environments. This is due to the build in split top that makes it easy to use ROD72 for bigger arrangements and meetings. This cable management can easily be opened and is perfect for computer wires. ROD72 is designed very functional so it is easy to put together as many meeting tables as you like.

ROD72 is the perfect meeting table for conferences, canteens, smaller meeting rooms and as a workdesk in informal environments. This is due to the build in split top that makes it easy to use ROD72 for bigger arrangements and meetings. This cable management can easily be opened and is perfect for computer wires. ROD72 is designed very functional so it is easy to put together as many meeting tables as you like.

Tork Mechanical Hand Towel Roll Dispenser is designed to last in busy restrooms and gives reliability you could count on. Durable and easy to maintain, it delivers a hygienic dispensing experience. It reduces consumption with one at a time consumption and accommodates a variety of 7.5 inch controlled roll towels. The dispenser is available in white and black. - Reduces waste and save money with hygienic, one-at-a time dispensing. - Serves more customers, with fewer change-out due to high capacity towel options. - Easy to load with a translucent cover for quick refilling checks - Guaranteed to run well over 360 000 hand dries, saving you time, money and hassle (Hand dries based on Essity’s internal lab testing.)

Tork Mechanical Hand Towel Roll Dispenser is designed to last in busy restrooms and gives reliability you could count on. Durable and easy to maintain, it delivers a hygienic dispensing experience. It reduces consumption with one at a time consumption and accommodates a variety of 7.5 inch controlled roll towels. The dispenser is available in white and black. - Reduces waste and save money with hygienic, one-at-a time dispensing. - Serves more customers, with fewer change-out due to high capacity towel options. - Easy to load with a translucent cover for quick refilling checks - Guaranteed to run well over 360 000 hand dries, saving you time, money and hassle (Hand dries based on Essity’s internal lab testing.)

Tork Mechanical Hand Towel Roll Dispenser is designed to last in busy restrooms and gives reliability you could count on. Durable and easy to maintain, it delivers a hygienic dispensing experience. It reduces consumption with one at a time consumption and accommodates a variety of 7.5 inch controlled roll towels. The dispenser is available in white and black. - Reduces waste and save money with hygienic, one-at-a time dispensing. - Serves more customers, with fewer change-out due to high capacity towel options. - Easy to load with a translucent cover for quick refilling checks - Guaranteed to run well over 360 000 hand dries, saving you time, money and hassle (Hand dries based on Essity’s internal lab testing.)

Tork Mechanical Hand Towel Roll Dispenser is designed to last in busy restrooms and gives reliability you could count on. Durable and easy to maintain, it delivers a hygienic dispensing experience. It reduces consumption with one at a time consumption and accommodates a variety of 7.5 inch controlled roll towels. The dispenser is available in white and black. - Reduces waste and save money with hygienic, one-at-a time dispensing. - Serves more customers, with fewer change-out due to high capacity towel options. - Easy to load with a translucent cover for quick refilling checks - Guaranteed to run well over 360 000 hand dries, saving you time, money and hassle (Hand dries based on Essity’s internal lab testing.)

The Ytong ThermStrong block is suitable for all load bearing and bracing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity λ = 0.10 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: F90-A from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong ThermStrong block is suitable for all load bearing and bracing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity λ = 0.10 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: F90-A from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong ThermStrong block is suitable for all load bearing and bracing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity λ = 0.10 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: F90-A from 7.5 cm - Economical and stable in value - Ergonomic processing

Natural soil stabilizer for roads and paths. i.pro STABEX is an ecological product, composed of natural hydraulic lime and a mineral hydraulic binder. Its use allows the improvement and stabilization of soils in a natural way. Natural hydraulic lime drops water content of the soil, flocculates clays, eases compaction and waterproofs the soil while maintains a sufficient porosity that allows it to "breath". The hydraulic binder improves its mechanical properties, increases the bearing capacity and thus allows a rapid circulation. - i.pro STABEX avoids the presence of dust in summer, as well as mud and ruts in winter, on roads and sidewalks - i.pro STABEX guarantees excellent ride comfort whatever the seasons. - i.pro STABEX preserves both the appearance and the color of the treated soils and sands, respecting the native varieties, thus preserving their natural appearance. - i.pro STABEX provides simple and easy maintenance of the floors, allowing to perform the same with a simple raking of the ground. It also reduces the growth of weeds. - i.pro STABEX is reversible. In case of a partial treatment, the soil can be remixed with the product and, after a new compaction, it will return to its original state. - i.pro STABEX provides a high resistance to erosion (even on gentle slopes) thanks to a high cohesion of the material. - i.pro STABEX limits the shrinkage due to its slow setting and hardening. When dosage over 6% in mass, for a most resistant pavement, it is recommend the use of fibers and ask to the product technical assistant of your area - i.pro STABEX allows to repair the problems of durability which appear with other stabilization systems, regardless of the size of the area to be restored, from small patches to large surfaces.

The ASSA ABLOY SW200 I (Integra) complete swing door system is the perfect choice where high performance and superior safety is of extra importance. Energy-efficiency ASSA ABLOY ENTRANCE SYSTEMS automated door systems are sustainable by nature and automatically convenient as they ensure opening only when needed to pass, eliminating unnecessary air infiltration and keeping climate zones separate. The innovative electronics in the ASSA ABLOY SW200 I (Integra) complete swing door system ensure minimal energy consumption for optimal door performance. Safety The ASSA ABLOY SW200 I (Integra) is safe to use for all, despite age and physical ability. In case of an obstruction by a person or object, the obstruction control ensures stop on stall and reverse operation. Finger trap protection due to round back edge profile. Furthermore, the system is fully compliant with European standards. Convenience An entrance equipped with a ASSA ABLOY SW200 I (Integra) swing door system is always accessible due to the optional battery backup. The system also monitors the battery for power and function, and gives an electronic indication if it is not working properly and needs to be replaced. The operator is truly reliable during all weather conditions as it is not affected by stack pressure and wind load when opening and/or closing. Also, for your convenience, safety and quick exit, the system can easily be manually opened when needed; despite extended closing torque, due to sensor detection ensuring lowest manual opening force. The ASSA ABLOY SW200 I (Integra) is delivered as a complete door system ready for installation and will allow for a quick and seamless commissioning. Security The ASSA ABLOY SW200 I (Integra)’s intelligent locking features are designed for your peace of mind. For example, double doors are precisely controlled to prevent jamming and increase security. The system can also sense when the door has not closed completely and will prompt the door to open again and close fully, even under heavy wind load and stack pressure. Aesthetics The ASSA ABLOY SW200 I (Integra) is a complete swing door system providing an aesthetic look as the drive unit is connected direct to the top of the door showing no arm system. Besam

Until now, the average pair of 3’0” x 7’0” manual swing doors could be challenging to navigate due to the limited 32” (813mm) clear door opening, small foot print and cross traffic concerns. Enter the revolutionary Besam ASSA ABLOY SL500 T67 telescopic sliding door. Specifically designed to fit the same door opening provided by a pair of 3’0” x 7’0” manual swing doors, only a minimum of 72” (1829mm) of overall frame width is required to transform your entryway with no less than 46” of usable door opening. Whether new construction or retrofit applications, look to Besam ASSA ABLOY SL500 T67 to automate virtually any small entryway.

Until now, the average pair of 3’0” x 7’0” manual swing doors could be challenging to navigate due to the limited 32” (813mm) clear door opening, small foot print and cross traffic concerns. Enter the revolutionary Besam ASSA ABLOY SL500 T67 telescopic sliding door. Specifically designed to fit the same door opening provided by a pair of 3’0” x 7’0” manual swing doors, only a minimum of 72” (1829mm) of overall frame width is required to transform your entryway with no less than 46” of usable door opening. Whether new construction or retrofit applications, look to Besam ASSA ABLOY SL500 T67 to automate virtually any small entryway.

Until now, the average pair of 3’0” x 7’0” manual swing doors could be challenging to navigate due to the limited 32” (813mm) clear door opening, small foot print and cross traffic concerns. Enter the revolutionary Besam ASSA ABLOY SL500 T67 telescopic sliding door. Specifically designed to fit the same door opening provided by a pair of 3’0” x 7’0” manual swing doors, only a minimum of 72” (1829mm) of overall frame width is required to transform your entryway with no less than 46” of usable door opening. Whether new construction or retrofit applications, look to Besam ASSA ABLOY SL500 T67 to automate virtually any small entryway.

The electro-hydraulic ASSA ABLOY 6030C Combidock from ASSA ABLOY Entrance Systems eliminates the need for different ramp heights and thereby reduces building costs. It is advisable to equip every frequent loading area with at least one ASSA ABLOY 6030C Combidock so that vehicles of all sizes can he efficiently handled. The telescopic lip is supplied in high-stability aluminium alloy which extremely flat, resulting in smoother passages between leveller and truck bed – giving ergonomic as well as economical advantages due to reduced chock oads for people and less wear and tear on the handling equipment. Crawford

The photocatalytic external walls made with i.active cements get, thanks to photocatalysis, theirs depolluting (decontamination) and self-cleaning performance. Depolluting performance consist on converting various organics pollutants (VOCs) and inorganic (NOx, SOx and others) to water soluble inert substances, contributing to cities sustainability, fighting against pollution(contamination). That solubility allows that rain or cleaning operations remove those substances of the surface, maintaining the aesthetic quality of the façade for a longer time with less maintenance necessities, this is what we consider self-cleaning performance of the envelope. Using a photocatalytic concrete with i.active cement, you are not only outfitting the external walls with these performance, you are also ensuring the durability of them as the photocatalizer of titanium dioxide, that promotes photocatalyisis, is on mass in the element. So, erosion due to natural phenomena or anthropogenic actions do not reduce the durability of these performances because under the disappeared layer there is another one with the same quantity of photocatalizer.

Ytong Thermo 35 cm is suitable economic solution for external walls for low energy buildings. The low dimensional tolerance enable rapid processing in the thin-bed method with a joint thickness of 1 to 3 mm. The result is a high-quality wall with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for reconstruction and renovation measures. The ecological and non-combustible material allows a safe use and provide high fire protection. Advantages: - Thermal conductivity for YTONG λ10, dry = 0.09 W/(mK) - Provides healthy, balanced indoor climate - Very high fire protection level at least EI240 - Economical and stable in value - Ergonomic processing

Combination Ytong Thermo 35 cm and Multipor mineral insulation plates is suitable for walls for passive and low energy buildings. The low dimensional tolerance enable rapid processing in the thin-bed method with a joint thickness of 1 to 3 mm. The result is a high-quality wall with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material allows a safe use and provide high fire protection. Advantages: - Thermal conductivity for YTONG λ10, dry = 0.09 W/(mK) - Thermal conductivity for Multipor λ10, dry = 0.042 W/(mK) - Provides healthy, balanced indoor climate - Very high fire protection level at least EI240 - Economical and stable in value - Ergonomic processing

Combination Ytong Thermo 20 cm and Multipor mineral insulation plates is suitable for walls for passive and low energy buildings. The low dimensional tolerance enable rapid processing in the thin-bed method with a joint thickness of 1 to 3 mm. The result is a high-quality wall with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material allows a safe use and provide high fire protection. Advantages: - Thermal conductivity for YTONG λ10, dry = 0.09 W/(mK) - Thermal conductivity for Multipor λ10, dry = 0.042 W/(mK) - Provides healthy, balanced indoor climate - Very high fire protection level at least EI240 - Economical and stable in value - Ergonomic processing

Combination Ytong Klassik 25 cm and Multipor mineral insulation plates is suitable for walls for low energy buildings in combination with good compressive strenght. The low dimensional tolerance enable rapid processing in the thin-bed method with a joint thickness of 1 to 3 mm. The result is a high-quality wall with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material allows a safe use and provide high fire protection. Advantages: - Thermal conductivity for YTONG λ10, dry = 0.12 W/(mK) - Thermal conductivity for Multipor λ10, dry = 0.042 W/(mK) - Provides healthy, balanced indoor climate - Very high fire protection level at least EI240 - Economical and stable in value - Ergonomic processing

Combination Ytong Massive 20 cm and Multipor mineral insulation plates is suitable for walls for low energy buildings in combination with very good compressive strenght. The low dimensional tolerance enable rapid processing in the thin-bed method with a joint thickness of 1 to 3 mm. The result is a high-quality wall with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material allows a safe use and provide high fire protection. Advantages: - Thermal conductivity for YTONG λ10, dry = 0.18 W/(mK) - Thermal conductivity for Multipor λ10, dry = 0.042 W/(mK) - Provides healthy, balanced indoor climate - Very high fire protection level at least EI240 - Economical and stable in value - Ergonomic processing

The Ytong Internal wall 250 is suitable for load-bearing or non load-bearing partitions. The low dimensional tolerance enable rapid processing in the thin-bed method with a joint thickness of 1-3 mm. The quality class B5 D700 is particularly suitable for applications where compressive strength and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material allows a safe use and provide high fire protection. Advantages: - Low thermal conductivity λ10, dry = 0.18 W/(mK) - Good sound insulation - Homogeneity and isotropy - Provides healthy, balanced indoor climate - Very high fire protection level: EI90 from 100 mm - Economical and stable in value - Ergonomic processing

The Ytong Internal wall 200 is suitable for non load-bearing partitions. The low dimensional tolerance enable rapid processing in the thin-bed method with a joint thickness of 1-3 mm. The quality class B5 D700 is particularly suitable for applications where compressive strength and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material allows a safe use and provide high fire protection. Advantages: - Low thermal conductivity λ10, dry = 0.18 W/(mK) - Good sound insulation - Homogeneity and isotropy - Provides healthy, balanced indoor climate - Very high fire protection level: EI90 from 100 mm - Economical and stable in value - Ergonomic processing

The Ytong Internal wall 150 is suitable for non load-bearing partitions. The low dimensional tolerance enable rapid processing in the thin-bed method with a joint thickness of 1-3 mm. The quality class B5 D700 is particularly suitable for applications where compressive strength and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material allows a safe use and provide high fire protection. Advantages: - Low thermal conductivity λ10, dry = 0.18 W/(mK) - Good sound insulation - Homogeneity and isotropy - Provides healthy, balanced indoor climate - Very high fire protection level: EI90 from 100 mm - Economical and stable in value - Ergonomic processing

The Ytong Internal wall 125 is suitable for non load-bearing partitions. The low dimensional tolerance enable rapid processing in the thin-bed method with a joint thickness of 1-3 mm. The quality class B5 D700 is particularly suitable for applications where compressive strength and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material allows a safe use and provide high fire protection. Advantages: - Low thermal conductivity λ10, dry = 0.18 W/(mK) - Good sound insulation - Homogeneity and isotropy - Provides healthy, balanced indoor climate - Very high fire protection level: EI90 from 100 mm - Economical and stable in value - Ergonomic processing

The idea of presenting interior designers with a visually unique product of high technical parameters took the form of gres, which offers two types of surfaces and a range of as many as six colours. Tecniq enjoys a universal appeal and uncovers its irresistible charm and its real value in everyday life – modern design possible due to numerous cutting edge technological novelties and as such it is a real achievement in the field of investment products.

The idea of presenting interior designers with a visually unique product of high technical parameters took the form of gres, which offers two types of surfaces and a range of as many as six colours. Tecniq enjoys a universal appeal and uncovers its irresistible charm and its real value in everyday life – modern design possible due to numerous cutting edge technological novelties and as such it is a real achievement in the field of investment products.

The idea of presenting interior designers with a visually unique product of high technical parameters took the form of gres, which offers two types of surfaces and a range of as many as six colours. Tecniq enjoys a universal appeal and uncovers its irresistible charm and its real value in everyday life – modern design possible due to numerous cutting edge technological novelties and as such it is a real achievement in the field of investment products.

The idea of presenting interior designers with a visually unique product of high technical parameters took the form of gres, which offers two types of surfaces and a range of as many as six colours. Tecniq enjoys a universal appeal and uncovers its irresistible charm and its real value in everyday life – modern design possible due to numerous cutting edge technological novelties and as such it is a real achievement in the field of investment products.

The idea of presenting interior designers with a visually unique product of high technical parameters took the form of gres, which offers two types of surfaces and a range of as many as six colours. Tecniq enjoys a universal appeal and uncovers its irresistible charm and its real value in everyday life – modern design possible due to numerous cutting edge technological novelties and as such it is a real achievement in the field of investment products.

The idea of presenting interior designers with a visually unique product of high technical parameters took the form of gres, which offers two types of surfaces and a range of as many as six colours. Tecniq enjoys a universal appeal and uncovers its irresistible charm and its real value in everyday life – modern design possible due to numerous cutting edge technological novelties and as such it is a real achievement in the field of investment products.

CUPOLEX® is a patented technology from Pontarolo Engineering spa for the construction of aerated floors, raised slabs, and lightweight fill replacement, it is a fast and economic system to cerate the sanitary void. One of the principal advantages of CUPOLEX® system is the healthiness of the building, due to the good air circulation, gas removal e.g. Radon gas, and humidity elimination. The igloo shaped elements, once placed and connected together are able to receive the concrete cast giving the slab a unique geometry with a matrix of small columns 56 cm distant ( 71 for domes heights above 55 cm), a hollowed space underneath and a slab thickness that can be designed to hold and load. The accessory element BETON STOP is used to close the lateral apertures, to prevent the concrete cast to enter the hollowed space, and can also be adjusted to fit any plant design with no need to cut the CUPOLEX® elements. The system also permits the monolithic cast of foundations and aerated slab.

The Ytong P is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class PL is ideal for walls that are optimized for thermal insulation. The quality class P is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.14 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong P is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class PL is ideal for walls that are optimized for thermal insulation. The quality class P is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.14 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong P is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class PL is ideal for walls that are optimized for thermal insulation. The quality class P is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.14 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

Singlesliding leaf fire-resistant doors EI120 . PUERTAS GISMERO sliding doors work as MOVABLE PARTITIONS that allow to separate spaces according to the functionality or fire requirements. Due to the singularity of the spaces they belong, the doors can be adapted to very large-sized hollows, mainly in large areas such as shopping malls and theatres, giving several fixing solutions in walls, slabs and partitions. Also, the sliding door can be connected to fire and/or access control centers to verify the automatic door closing and opening. A swinging door can also be integrated in the sliding door panels. As for other PUERTAS GISMERO products, the versatility is total in closure and finishing systems

<p>Double Telescopic sliding leaf fire-resistant doors EI120 . PUERTAS GISMERO sliding doors work as MOVABLE PARTITIONS that allow to separate spaces according to the functionality or fire requirements. Due to the singularity of the spaces they belong, the doors can be adapted to very large-sized hollows, mainly in large areas such as shopping malls and theatres, giving several fixing solutions in walls, slabs and partitions.<br>Also, the sliding door can be connected to fire and/or access control centers to verify the automatic door closing and opening. A swinging door can also be integrated in the sliding door panels.<br>As for other PUERTAS GISMERO products, the versatility is total in closure and finishing systems</p>

Metawell® acoustic elements are suitable for all rooms where the reverberation time impairs speech intelligibility. The elements have performed so well in acoustic tests that they have been classified as „Absorber class A“. The aluminium sandwich construction results in a high rigidity with an elegant and filigree appearance. With only 6 mm of visible edge, the element is very thin, but at the same time so rigid that the suspension ropes can be arranged far in the centre of the board and are therefore barely visible. With the included suspension ropes, the sail can be mounted in no time at all. With a weight of only 8.9 kg, the element is a lightweight under the acoustic elements. The elements are delivered in individual stackable cardboard packaging. Due to the stable construction of the element, it cannot break even during transport and installation. The element is delivered with a high-quality surface in the color RAL 9010 (pure white). If a renovation is required after years, the element can be easily covered; the acoustic values are still preserved. Even repeated overcoating is possible without performance loss. The acoustic elements are packed in quantities of 10 pieces on a disposable pallet.

Metawell® acoustic elements are suitable for all rooms where the reverberation time impairs speech intelligibility. The elements have performed so well in acoustic tests that they have been classified as „Absorber class A“. The aluminium sandwich construction results in a high rigidity with an elegant and filigree appearance. With only 6 mm of visible edge, the element is very thin, but at the same time so rigid that the suspension ropes can be arranged far in the centre of the board and are therefore barely visible. With the included suspension ropes, the sail can be mounted in no time at all. With a weight of only 8.9 kg, the element is a lightweight under the acoustic elements. The elements are delivered in individual stackable cardboard packaging. Due to the stable construction of the element, it cannot break even during transport and installation. The element is delivered with a high-quality surface in the color RAL 9010 (pure white). If a renovation is required after years, the element can be easily covered; the acoustic values are still preserved. Even repeated overcoating is possible without performance loss. The elements include a LED workplace lighting.

<p>The PC-100 is a professional grade, rack-mountable power conditioner designed to provide 120 Volt AC power distribution, switching, surge protection, and noise filtering for Crestron® control systems, AV systems, computers, and other equipment. Eight switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected and filtered. The switched outlets are arranged in four banks of two, two of which are turn-on delayed to prevent dangerous transients during power-up.<br><br></p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-100 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [1]</li></ul><strong>Three-Stage Sequential Turn-On Delay</strong><br>The switched outlets on the PC-100’s rear panel are arranged in four banks, with two outlets per bank. When the front panel switch is turned on, or when power is applied to the main line input following a power outage or through an externally switched circuit, the first two banks of outlets turn on immediately, the third bank turns on following a one second delay, and the fourth bank turns on following a two second delay. This ensures that the connected equipment gets powered up in proper order, preventing dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up.<br><p><br></p><p><strong>Protection Status Output</strong></p>A contact closure output is included to provide notification to a control system or other equipment if the internal surge protection circuit is compromised due to an extreme transient voltage surge. In the unlikely event of such a condition, the PROTECTION output presents a low-voltage contact closure signal and all power to the rear panel outlets is switched off. Protection status is also indicated via LEDs on the front panel.<br><p><br></p><p><strong>UL® 1449 Certified</strong></p><p>The PC-100 has been tested and certified by UL as compliant with the UL 1449 safety and performance standard for surge protective devices (SPD).<br></p><p></p><p>  </p><p><strong>Key Features</strong></p><ul><li>Rack-mountable power conditioner</li><li>Eight switched rear panel outlets</li><li>Three-stage sequential turn-on delay</li><li>One unswitched front panel outlet</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [1]</li><li>Front panel main power switch and status indicators</li><li>Protection status contact closure output</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul><p>1. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-100 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-100 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

<p>The PC-200 is a professional grade, rack-mountable power conditioner and controller designed to provide 120 Volt AC power distribution, switching, surge protection, noise filtering, and energy monitoring for Crestron® control systems, AV systems, computers, and other equipment. Eight switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected, filtered, and monitored. The switched outlets are arranged in four banks of two, three of which are turn-on delay-adjustable when controlled from the front panel power switch. The same three outlet banks are also individually controllable via a control system to enable selective switching of devices, on/off power sequencing, load-shedding, and other custom power control functionality.[1]<br>Built-in RMS voltage and current monitoring enables logging and reporting of the line voltage, current, power, and energy usage at the input. An external temperature sensor is included to keep tabs on heat conditions within the equipment rack or room. Network connectivity allows for setup and operation using a web browser, with extensive custom control and monitoring capabilities enabled through integration with a Crestron control system, the MyCrestron.com residential monitoring service, the Crestron Fusion® Cloud enterprise management service, or an SNMP client.[1,2]<br><br></p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-200 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range, which is adjustable on the PC-200</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [3]</li></ul><p><strong>Four-Stage Adjustable Turn-On Delay</strong><br>The switched outlets on the PC-200’s rear panel are arranged in four banks, with two outlets per bank. When operated by its front panel power switch, the first bank turns on immediately while the other three banks can be configured to turn on in any order according to the delay time set for each bank. Each bank is independently adjustable to provide up to 10 seconds of delay before turning on, ensuring that the connected equipment gets powered up in proper order with sufficient time for each piece to stabilize. This helps to prevent dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up. Delayed turn-on is initiated by turning on the front panel power switch, or by applying power to the main line input following a power outage or through an externally switched circuit.<br><br></p><p><strong>Three Remote-Controllable Switched Outlet Banks</strong><br>When connected to a local area network, three of the four outlet banks on the PC-200’s rear panel can be turned on or off independently using a web browser or control system. The other bank is always on as long as the front panel switch is turned on. This energy-saving feature allows select components to be powered down when not needed. Through integration with a control system, custom functionality can be programmed to enable control from a touch screen, keypad, remote, or mobile device. Sequential power-up and power-down functionality can be enabled through programming of the control system. For systems employing a backup generator or UPS, load-shedding can be performed to shut down unnecessary components during a power outage.[1]<br><br></p><strong>Energy Monitoring<br></strong>By sensing the incoming line voltage and the total device load, the PC-200 facilitates a host of solutions for monitoring, automating, and troubleshooting a system.<br><ul><li>Voltage monitoring allows fluctuations in the power line to be tracked and logged, helping to identify and document problems with the power utility or building wiring.</li><li>Energy monitoring provides the real power consumption (watts), current draw (amps), and energy usage (watt-hours) for all of the connected devices combined.</li><li>By connecting and testing one component at a time, the PC-200 allows power-hungry equipment to be identified and replaced with more efficient equipment.</li><li>High inrush current devices can be identified to assist in optimizing the configuration of power sequencing schemes.</li><li>Overall energy usage can be tracked and logged to identify trends and reform energy-wasting behaviors.</li><li>System usage can be tracked to inform the scheduling of maintenance and future purchasing decisions.</li><li>An alert notification can be sent if there’s a sudden or abnormal drop in current draw, potentially indicating a device has been shut off improperly or disconnected due to theft (effective only when outlets are switched on).</li></ul><p><strong>Ambient Temperature Sensing</strong></p><p>The PC-200 offers a complete equipment protection solution by monitoring the ambient temperature within the equipment cabinet or room to prevent overheating. The included temperature sensor connects to the rear of the PC-200 and features a choice of magnetic or adhesive mounting for easy placement within a typical equipment rack enclosure. The over-temperature cutoff threshold can be set to shut down power to the system if conditions exceed a safe operating temperature. Through a control system, the temperature measurement can be utilized to regulate the operation of cooling fans or air-conditioning equipment to keep equipment running cool.</p><p><strong>Ping Monitoring</strong></p><p>No matter how well a system is designed and programmed, even the finest control system or computer has the potential to lock up and stop responding once in a while. The PC-200 can be configured to detect an unresponsive device by sending it a ping command at regular intervals. If the ping request is not returned after four tries, the outlet bank feeding the monitored device cycles off and on to reboot the device, quickly restoring normal operation without any human intervention.</p><p><strong>Remote Management & Control</strong><br></p><p>The PC-200 integrates neatly into any system or facility. Used alone, it can be set up and managed through a web browser. It can also be configured to send email notifications in case of certain specified events. Integration with the MyCrestron.com residential monitoring service provides a cloud based solution for homeowners to monitor and manage the PC-200 as part of a complete Crestron home automation system. Or, Crestron Fusion Cloud provides an enterprise solution for corporations and universities to manage rooms using the PC-200 throughout a building or campus. Built-in SNMP support enables integration with third-party IT management software, allowing network administrators to manage one or many networked PC-200s in an IT-friendly format. And of course, the PC-200 can be integrated with a Crestron control system via Ethernet or Cresnet® to enable control and monitoring through a touch screen, handheld remote, or mobile device.[1,2]</p><p><strong>Key Features</strong><br></p><ul><li>Rack-mountable power conditioner and controller</li><li>Eight switched rear panel outlets, arranged in banks of two</li><li>Adjustable turn-on delay and remote switching per each of three banks</li><li>One unswitched front panel outlet</li><li>Built-in current sensing and energy monitoring</li><li>Line voltage monitoring</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Adjustable over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [3]</li><li>Ambient temperature sensing and over-temperature cutoff</li><li>Ping monitoring (device lockup detection and reboot)</li><li>Built-in energy usage and event logging</li><li>Front panel main power switch and status indicators</li><li>Easy setup and operation via web browser</li><li>Crestron® control system integration via Ethernet or Cresnet®</li><li>Remote management via MyCrestron.com, Crestron Fusion® Cloud, or SNMP [2]</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul><p>1. Crestron control system and custom programming sold separately.<br>2. Email notification and direct integration with MyCrestron.com, Crestron Fusion, and SNMP will be enabled through a future firmware update. Alternately, these services can be integrated now through a Crestron control system with custom programming.<br>3. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-200 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-200 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

<p>The PC-300 is a professional grade, rack-mountable power conditioner and controller designed to provide 120 Volt AC power distribution, switching, surge protection, noise filtering, and energy monitoring for Crestron® control systems, AV systems, computers, and other equipment. Eight individually-switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected, filtered, and monitored. The switched outlets are each turn-on delay-adjustable when controlled from the front panel power switch. The switched outlets are also individually controllable via a control system to enable independent switching of devices, on/off power sequencing, load-shedding, and other custom power control functionality.[1]</p><p>Built-in RMS voltage and current monitoring enables logging and reporting of line voltage fluctuations at the input, as well as current, power, and energy usage at each outlet. An external temperature sensor is included to keep tabs on heat conditions within the equipment rack or room. Network connectivity allows for setup and operation using a web browser, with extensive custom control and monitoring capabilities enabled through integration with a Crestron control system, the MyCrestron.com residential monitoring service, the Crestron Fusion® Cloud enterprise management service, or an SNMP client.[1,2] Setup and operation can also be performed through the LCD front panel.</p><p> </p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-300 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range, which is adjustable on the PC-300</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [3]</li></ul> <p><strong>Eight-Stage Adjustable Turn-On Delay</strong><br>When operated by its front panel power switch, the PC-300 allows each of its rear panel outlets to turn on in any order according to the delay time set for each outlet. Each outlet is individually adjustable to provide up to 10 seconds of delay before turning on, ensuring that the connected equipment gets powered up in proper order with sufficient time for each piece to stabilize. This helps to prevent dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up. Delayed turn-on is initiated by turning on the front panel power switch, or by applying power to the main line input following a power outage or through an externally switched circuit.<br><br></p><p><strong>Eight Remote-Controllable Switched Outlets</strong><br>Any of the PC-300’s eight rear panel outlets can be turned on or off individually through the front panel LCD screen or over the network using a web browser or control system. This energy-saving feature allows select components to be powered down when not needed. Through integration with a control system, custom functionality can be programmed to enable control from a touch screen, keypad, remote, or mobile device. Sequential power-up and power-down functionality can be enabled through programming of the control system, with select outlets designated as always on. For systems employing a backup generator or UPS, load-shedding can be performed to shut down unnecessary components during a power outage.[1]</p><p> </p><strong>Energy Monitoring</strong><br>By sensing the incoming line voltage and individual device loads, the PC-300 facilitates a host of solutions for monitoring, automating, and troubleshooting a system.<br><ul><li>Voltage monitoring allows fluctuations in the power line to be tracked and logged, helping to identify and document problems with the power utility or building wiring.</li><li>Energy monitoring per outlet provides the real power consumption (watts), current draw (amps), and energy usage (watt-hours) for each connected device.</li><li>Allows power-hungry equipment to be identified and replaced with more efficient equipment.</li><li>High inrush current devices can be identified to assist in optimizing the configuration of power sequencing schemes.</li><li>Overall energy usage can be tracked and logged to identify trends and reform energy-wasting behaviors.</li><li>Individual device usage can be tracked to inform the scheduling of maintenance and future purchasing decisions.</li><li>The power state of an IR controlled device can often be determined by sensing its AC current draw, ensuring it’s on when it should be on.</li><li>An alert notification can be sent if there’s a sudden or abnormal drop in current draw, potentially indicating a device has been shut off improperly or disconnected due to theft (effective only when outlets are switched on).</li></ul><p> </p><p><strong>Ambient Temperature Sensing</strong><br>The PC-300 offers a complete equipment protection solution by monitoring the ambient temperature within the equipment cabinet or room to prevent overheating. The included temperature sensor connects to the rear of the PC-300 and features a choice of magnetic or adhesive mounting for easy placement within a typical equipment rack enclosure. The over-temperature cutoff threshold can be set to shut down power to the system if conditions exceed a safe operating temperature. Through a control system, the temperature measurement can be utilized to regulate the operation of cooling fans or air-conditioning equipment to keep equipment running cool.</p> <p><strong>Ping Monitoring</strong><br>No matter how well a system is designed and programmed, even the finest control system or computer has the potential to lock up and stop responding once in a while. The PC-300 can be configured to detect an unresponsive device by sending it a ping command at regular intervals. If the ping request is not returned after four tries, the outlet feeding the monitored device cycles off and on to reboot the device, quickly restoring normal operation without any human intervention.</p> <p><strong>Built-In Logging</strong><br>Events such as power surges, over/under voltage conditions, over-temperature conditions, ping failures, outlet switching activity, and sudden changes in current draw (indicative of a device being improperly shut off or disconnected) can all be logged as they occur to document the time and cause of problems and to track device usage. All sensor readings are logged at a configurable interval as short as five seconds providing a minimum of one week’s worth of data. Logs can be retrieved periodically to record a detailed history of events and energy usage over time.</p> <strong>UL® 1449 Certified</strong><br>The PC-300 has been tested and certified by UL as compliant with the UL 1449 safety and performance standard for surge protective devices (SPD).<br>  <br><strong>Key Features</strong><br><ul><li>Rack-mountable power conditioner and controller</li><li>Eight individual-switched rear panel outlets</li><li>Adjustable turn-on delay and local/remote switching per outlet</li><li>One unswitched front panel outlet</li><li>Built-in current sensing and energy monitoring per outlet</li><li>Line voltage monitoring</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Adjustable over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [3]</li><li>Ambient temperature sensing and over-temperature cutoff</li><li>Ping monitoring (device lockup detection and reboot)</li><li>Built-in energy usage and event logging</li><li>Front panel main power switch, status indicators, and color LCD</li><li>Easy setup and operation via front panel or web browser</li><li>Crestron® control system integration via Ethernet or Cresnet®</li><li>Remote management via MyCrestron.com, Crestron Fusion® Cloud, or SNMP [2]</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul> <p>1. Crestron control system and custom programming sold separately.<br>2. Email notification and direct integration with MyCrestron.com, Crestron Fusion, and SNMP will be enabled through a future firmware update. Alternately, these services can be integrated now through a Crestron control system with custom programming.<br>3. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-300 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-300 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

<p>The DMPS3-4K-150-C from Crestron® provides an ultra high-definition presentation switcher and control solution that’s perfect for huddle rooms, conference rooms, and classrooms. It integrates the control system, multi-format switcher, 4K video scaler, mic preamp, and audio DSP all into one compact device that mounts conveniently under a conference table or in an equipment rack. Built-in Crestron Connect It™ functionality affords a complete collaboration solution that’s easy and affordable to deploy in any small to medium sized meeting space. Without requiring any programming, the DMPS3-4K-150-C is easily configurable for a variety of media presentation applications.<br><br></p> <p>Auto-switching HDMI®, VGA, and analog audio inputs provide the essential connectivity needed to manage multiple computers and other media sources. A full-featured microphone input is also included for applications requiring high-quality speech reinforcement. The selected input source and microphone can be mixed and routed to one HDMI output and one stereo analog audio output. Additional DigitalMedia 8G+® inputs and output afford a streamlined, long-distance wiring solution for remote sources, for the display device, and for facility-wide integration as part of a larger media distribution system. Built-in 4K scaling ensures the highest possible image quality, and compatibility with the widest range of sources and displays.</p> <p><strong>4K Ultra HD<br></strong>The DMPS3-4K-150-C handles 4K and Ultra HD video signals, which is essential to ensure support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.</p> <p><strong>Crestron Connect It™</strong><br></p> <p>Crestron Connect It is a cost-effective, simple-to-use presentation solution that provides tabletop BYOD connectivity and one-touch control for multiple participants around a conference table. Simply add up to four Crestron Connect It Cable Caddies (TT-100 series [1]) to the DMPS3-4K-150-C. Its auto-switching inputs support individual HDMI, VGA, and analog audio connections at each cable caddy. Four USB ports on the DMPS3-4K-150-C provide power and communications for each cable caddy.<br>A fully functional Crestron Connect It system is enabled right out of the box by simply connecting the cable caddies and input cables. Additional settings and AV adjustments are available through a simple web browser setup screen. In addition to the Crestron Connect It devices, the DMPS3-4K-150-C can also accommodate two DM® transmitters, one DM receiver, and an AirMedia® Presentation Gateway without any additional programming.[1,2]<br>No Programming Required!<br>Installing the DMPS3-4K-150-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: www.crestron.com/avframework.[3]<br>  <br><strong>Key Features</strong></p><ul><li>Ultra high-definition, multi-format presentation switcher, scaler, mic preamp, audio DSP, and control system</li><li>Out of the box Crestron Connect It™ collaboration system functionality</li><li>Supports up to four TT-100 series Crestron Connect It Cable Caddies [1]</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [3]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Includes four auto-switching HDMI®, VGA, and stereo analog audio inputs [6]</li><li>Includes two DM 8G+® inputs</li><li>Also supports Dual-Mode DisplayPort, DVI, HDBaseT®, and analog video sources [4,5]</li><li>Input auto-detection configures each input automatically</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes a single microphone input with EQ, gating, and compression</li><li>Provides parallel HDMI and DM 8G+ outputs for one or more display devices</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [9]</li><li>Integrates seamlessly with DigitalMedia™ matrix switchers to allow facility-wide signal distribution</li><li>HDBaseT Certified — Enables direct connection to other HDBaseT certified equipment</li><li>Features a built-in, high-performance 4K scaler</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion, and passes 3D video (without scaling) to 3D displays [7]</li><li>Provides a balanced stereo audio output with graphic EQ, limiting, and delay</li><li>Enables analog-to-HDMI audio embedding and de-embedding [6]</li><li>Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio [8]</li><li>Enables USB signal routing via DM transmitters and receivers or USB-EXT-DM extenders [10]</li><li>Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via built-in RC-5 compatible IR receiver</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Includes front panel controls for switching and volume adjustment</li><li>Includes customizable front panel label strips</li><li>Allows complete AV setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM and HDBaseT PoE powered devices</li><li>Mounts under the table or in a single 19” rack space</li></ul> <p>1. Item(s) sold separately.<br>2. The AirMedia Presentation Gateway, model AM-101, requires one HDMI input on the DMPS3-4K-150-C.<br>3. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: www.crestron.com/avframework.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types.<br>6. When using an analog audio input in combination with an HDMI video input, the source’s video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the source’s video resolution is higher than 1920x1200.<br>7. Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D.<br>8. Routing of a multichannel audio signal via a digital input and output (HDMI or DM) requires the input to be set for “mixer bypass” mode. When that input is selected, all audio controls on the digital output are disabled and the ability to route the microphone signal to that output is defeated. Mixer bypass mode also disables the Input Compensation control on that input.<br>9. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ & HDBaseT Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>10. Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. The USB ports onboard the DMPS3-4K-150-C are not usable for USB signal routing. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.<br>11. License required. The DMPS3-4K-150-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.<br>12. Due to the inherent power loss that occurs over CATx cable, a maximum of 12.95 Watts is delivered at each PoDM or HDBaseT PoE powered device. Any wiring that is connected to a PoDM or HDBaseT PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.</p> <p></p>

<p>The DMPS3-4K-100-C from Crestron® provides an ultra high-definition presentation switcher and control solution that’s perfect for huddle rooms, conference rooms, and classrooms. It integrates the control system, multi-format switcher, 4K video scaler, mic preamp, and audio DSP all into one compact device that mounts conveniently under a conference table or in an equipment rack. Built-in Crestron Connect It™ functionality affords a complete collaboration solution that’s easy and affordable to deploy in any small to medium sized meeting space. Without requiring any programming, the DMPS3-4K-100-C is easily configurable for a variety of media presentation applications.<br></p> <p>Auto-switching HDMI®, VGA, and analog audio inputs provide the essential connectivity needed to manage multiple computers and other media sources. A full-featured microphone input is also included for applications requiring high-quality speech reinforcement. The selected input source and microphone can be mixed and routed to one HDMI output and one stereo analog audio output. Additionally, its DigitalMedia 8G+® output affords a streamlined, long-distance wiring solution for the display device, and for facility-wide integration as part of a larger media distribution system. Built-in 4K scaling ensures the highest possible image quality, and compatibility with the widest range of sources and displays.<br><br></p> <p><strong>4K Ultra HD<br></strong>The DMPS3-4K-100-C handles 4K and Ultra HD video signals, which is essential to ensure support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.<br><br></p> <p><strong>Crestron Connect It™<br></strong>Crestron Connect It is a cost-effective, simple-to-use presentation solution that provides tabletop BYOD connectivity and one-touch control for multiple participants around a conference table. Simply add up to four Crestron Connect It Cable Caddies (TT-100 series [1]) to the DMPS3-4K-100-C. Its auto-switching inputs support individual HDMI, VGA, and analog audio connections at each cable caddy. Four USB ports on the DMPS3-4K-100-C provide power and communications for each cable caddy.<br>A fully functional Crestron Connect It system is enabled right out of the box by simply connecting the cable caddies and input cables. Additional settings and AV adjustments are available through a simple web browser setup screen. In addition to the Crestron Connect It devices, the DMPS3-4K-100-C can also accommodate a single DM® receiver and an AirMedia® Presentation Gateway without any additional programming.[1,2]<br><br></p> <p><strong>No Programming Required!</strong><br>Installing the DMPS3-4K-100-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. .[3]<br><br></p> <p><strong>Multi-Format Auto-Switcher</strong><br>The DMPS3-4K-100-C provides high-performance automatic switching between four groups of inputs, each including HDMI, VGA, and unbalanced stereo audio. The HDMI inputs are compatible with DVI and Dual-Mode DisplayPort sources, and the VGA inputs can handled RGB, composite, S-Video, and component video sources. Digital audio is supported by the HDMI inputs, plus each analog audio input may be used in combination with its corresponding VGA or HDMI video input. Input auto-detection eliminates the need to configure the inputs – simply connect your source and the DMPS3-4K-100-C selects the right audio and video combination. The switched video signal is routed to one HDMI output and one DM 8G+® output simultaneously. The DM 8G+ output is compatible with HDBaseT®.[4,5,6]<br>  </p><p><strong>Key Features</strong></p> <ul><li>Ultra high-definition, multi-format presentation switcher, scaler, mic preamp, audio DSP, and control system</li><li>Out of the box Crestron Connect It™ collaboration system functionality</li><li>Supports up to four TT-100 series Crestron Connect It Cable Caddies [1]</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [3]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Includes four auto-switching HDMI®, VGA, and stereo analog audio inputs [6]</li><li>Also supports Dual-Mode DisplayPort, DVI, and analog video sources [4,5]</li><li>Input auto-detection configures each input automatically</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes a single microphone input with EQ, gating, and compression</li><li>Provides parallel HDMI and DM 8G+® outputs for one or more display devices</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [9]</li><li>Integrates seamlessly with DigitalMedia™ matrix switchers to allow facility-wide signal distribution</li><li>HDBaseT® Certified — Enables direct connection to an HDBaseT certified display device</li><li>Features a built-in, high-performance 4K scaler</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion, and passes 3D video (without scaling) to 3D displays [7]</li><li>Provides a balanced stereo audio output with graphic EQ, limiting, and delay</li><li>Enables analog-to-HDMI audio embedding and de-embedding [6]</li><li>Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio [8]</li><li>Includes onboard IR, RS-232, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via built-in RC-5 compatible IR receiver</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Includes front panel controls for switching and volume adjustment</li><li>Includes customizable front panel label strips</li><li>Allows complete AV setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM and HDBaseT PoE powered devices</li><li>Mounts under the table or in a single 19” rack space</li></ul> <p>1. Item(s) sold separately.<br>2. The AirMedia Presentation Gateway, model AM-101, requires one HDMI input on the DMPS3-4K-100-C.<br>3. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: www.crestron.com/avframework.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types.<br>6. When using an analog audio input in combination with an HDMI video input, the source’s video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the source’s video resolution is higher than 1920x1200.<br>7. Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D.<br>8. Routing of a multichannel audio signal via a digital input and output (HDMI or DM) requires the input to be set for “mixer bypass” mode. When that input is selected, all audio controls on the digital output are disabled and the ability to route the microphone signal to that output is defeated. Mixer bypass mode also disables the Input Compensation control on that input.<br>9. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ & HDBaseT Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>10. License required. The DMPS3-4K-100-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.<br>11. Due to the inherent power loss that occurs over CATx cable, a maximum of 12.95 Watts is delivered at the PoDM or HDBaseT PoE powered device. Any wiring that is connected to a PoDM or HDBaseT PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.</p>

<p>The DMPS3-4K-250-C from Crestron® offers an all-in-one 4K AV presentation system for classrooms, boardrooms, lecture halls, and videoconference rooms. Delivering a complete, custom-programmable room solution with fully-configurable signal routing and processing is easy and cost-effective using the DMPS3-4K-250-C. In one 3-space rack mount package, it integrates the control system, matrix switcher, video scaler, streaming decoder, mic mixer, audio DSP, and amplifier. Its built-in AirMedia® gateway, when activated [1], enables wireless presentation from computers and mobile devices. DigitalMedia 8G+® and HDBaseT® connectivity affords a streamlined, long-distance wiring solution for remote sources and display devices, and for facility-wide integration as part of a larger media distribution system.</p><p>Note: To purchase the DMPS3-4K-250-C with AirMedia pre-activated (no license required), see model DMPS3-4K-250-C-AIRMEDIA.<br>4K Ultra HD<br>Crestron DigitalMedia™ continues to advance the standard for digital AV signal management, delivering the most complete end-to-end 4K system solutions available. The DMPS3-4K-250-C handles 4K/60 video with HDCP 2.2 encryption, ensuring support for all the latest 4K and Ultra HD displays and media sources. Support for 4K is also essential to support the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.<br> <br><strong>No Programming Required!<br></strong>Installing the DMPS3-4K-250-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: http://www.crestron.com/avframework.[2]<br> <br><strong>AirMedia® Wireless Presentation [1]<br></strong>Built-in AirMedia technology allows for wireless presentation of content from a laptop, smartphone, or tablet device via a Wi-Fi® wireless network. With AirMedia, anyone can walk into the room with a Windows® or MacBook® laptop and connect without wires, enabling the presentation of any content including Full HD video at frame rates up to 30 fps. iPhone®, iPad®, and Android™ devices can present PowerPoint®, Excel®, Word, and PDF documents, as well as pictures, videos, or any app content with full-screen mirroring. AirMedia lets up to 32 participants connect at once, switching from one to the next for seamless collaboration on the fly.[1]<br><br></p><strong>HD Streaming Video<br></strong>Its onboard streaming decoder enables the DMPS3-4K-250-C to receive a high-definition AV signal over the network or internet from a DigitalMedia switcher, IP camera, or streaming encoder (Crestron DM-TXRX-100-STR or similar). H.264 and MJPEG streaming formats are supported with resolutions up to HD 1080p and bitrates up to 25 Mbps. High-quality AAC audio decoding is employed to handle 2-channel stereo audio with full frequency response.[3]<br>  <br><p><strong>Key Features</strong></p><ul><li>Ultra high-definition 8x2 system switcher, scaler, mic mixer, audio DSP, amplifier, and control system</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [2]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Onboard AirMedia® gateway enables wireless BYOD presentation capability [1]</li><li>Built-in H.264 streaming video decoder [3]</li><li>Provides matrix signal routing for up to 8 video sources and 2 displays</li><li>Handles video resolutions up to 4K DCI and Ultra HD</li><li>Includes HDMI®, DM 8G+®, and balanced stereo analog audio inputs</li><li>Also supports Dual-Mode DisplayPort, DVI, and HDBaseT® sources [4]</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>HDCP 2.2 compliant</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes built-in 6-channel gated microphone mixing with DSP</li><li>Provides one HDMI output and one DM 8G+ (HDBaseT compatible) output</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [7]</li><li>HDBaseT Certified — Enables direct connection to other HDBaseT certified equipment</li><li>Features a high-performance 4K scaler on the HDMI output</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion [5]</li><li>Provides three balanced stereo audio outputs, each with independent mixer and DSP</li><li>Provides two additional audio mixes, either of which is selectable at either digital output</li><li>Features a built-in amplifier, selectable for 25W/Ch. @ 8Ω stereo or 50W @ 70/100 Volts mono</li><li>Enables analog-to-HDMI audio embedding and de-embedding</li><li>Enables USB signal routing via DM® transmitters and receivers or USB-EXT-DM series extenders [9]</li><li>Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via external RC-5 compatible IR receiver [6]</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Control Subnet — provides a dedicated local network for Crestron devices</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Content LAN port allows streaming and AirMedia traffic to be isolated on a secondary network</li><li>Includes front panel controls for basic configuration, diagnostics, and signal routing</li><li>Includes customizable front panel label strips and LCD display</li><li>Allows advanced setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM+ and HDBaseT PoE+ powered devices [8]</li><li>3-space 19-inch rack-mountable</li></ul> <p>1. To enable the onboard AirMedia gateway requires the purchase of one SW-DMPS3-AIRMEDIA license. To obtain the license or for any questions regarding AirMedia activation, please visit https://www.crestron.com/dmps-airmedia-activation. To purchase the DMPS3-4K-250-C with AirMedia pre-activated (no license required), see model DMPS3-4K-250-C-AIRMEDIA. Wireless presentation using AirMedia requires an external wireless access point (not included). A wired Ethernet connection may also be used. AirMedia network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port. Performance quality for full-motion video content is dependent upon network performance and sending device performance. AirMedia support in the DMPS3-4K-250-C includes the same essential functionality as the AM-101 AirMedia Presentation Gateway with the exclusion of quad view, moderator mode, and remote view.<br>2. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: http://www.crestron.com/avframework.<br>3. The streaming and AirMedia inputs are mutually exclusive. Only one or the other can be used at one time. Streaming network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The HDMI output does not pass 3D signals. On this output, 3D signals are automatically converted to 2D, then scaled and output as 2D. 3D signals can be passed through the DM 8G+ output.<br>6. Item(s) sold separately.<br>7. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum DM 8G+ Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>8. Enabling PoDM and PoE power sourcing requires an external power supply, model PW-4830DUS or DM-PSU-3X8-RPS, sold separately. Due to the inherent power loss that occurs over CATx cable, a maximum of 25.5 Watts is delivered at each PoDM+ or HDBaseT PoE+ powered device. Be aware that the CONTROL SUBNET port is limited to regular PoE (Class 0-3), which delivers a maximum of 12.95 Watts to the powered device. Any wiring that is connected to a PoDM or PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.<br>9. Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. The USB ports onboard the DMPS3-4K-250-C are not usable for USB signal routing. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.<br>10. License required. The DMPS3-4K-250-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.</p>

<p>The DMPS3-4K-350-C from Crestron® offers an all-in-one 4K AV presentation system for classrooms, boardrooms, lecture halls, and videoconference rooms. Delivering a complete, custom-programmable room solution with fully-configurable signal routing and processing is easy and cost-effective using the DMPS3-4K-350-C. In one 3-space rack mount package, it integrates the control system, matrix switcher, video scalers, streaming decoder, mic mixer, audio DSP, and amplifier. Its built-in AirMedia® gateway, when activated [1], enables wireless presentation from computers and mobile devices. DigitalMedia 8G+® and HDBaseT® connectivity affords a streamlined, long-distance wiring solution for remote sources and display devices, and for facility-wide integration as part of a larger media distribution system.</p><p>Note: To purchase the DMPS3-4K-350-C with AirMedia pre-activated (no license required), see model DMPS3-4K-350-C-AIRMEDIA.<br>4K Ultra HD<br>Crestron DigitalMedia™ continues to advance the standard for digital AV signal management, delivering the most complete end-to-end 4K system solutions available. The DMPS3-4K-350-C handles 4K/60 video with HDCP 2.2 encryption, ensuring support for all the latest 4K and Ultra HD displays and media sources. Support for 4K is also essential to support the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.<br> <br><strong>No Programming Required!</strong><br>Installing the DMPS3-4K-350-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: http://www.crestron.com/avframework.[2]<br> <br><strong>AirMedia® Wireless Presentation [1]</strong><br>Built-in AirMedia technology allows for wireless presentation of content from a laptop, smartphone, or tablet device via a Wi-Fi® wireless network. With AirMedia, anyone can walk into the room with a Windows® or MacBook® laptop and connect without wires, enabling the presentation of any content including Full HD video at frame rates up to 30 fps. iPhone®, iPad®, and Android™ devices can present PowerPoint®, Excel®, Word, and PDF documents, as well as pictures, videos, or any app content with full-screen mirroring. AirMedia lets up to 32 participants connect at once, switching from one to the next for seamless collaboration on the fly.[1]<br><br></p><strong>HD Streaming Video</strong><br>Its onboard streaming decoder enables the DMPS3-4K-350-C to receive a high-definition AV signal over the network or internet from a DigitalMedia switcher, IP camera, or streaming encoder (Crestron DM-TXRX-100-STR or similar). H.264 and MJPEG streaming formats are supported with resolutions up to HD 1080p and bitrates up to 25 Mbps. High-quality AAC audio decoding is employed to handle 2-channel stereo audio with full frequency response.[3]<br>  <br><p><strong>Key Features</strong></p><ul><li>Ultra high-definition 9x4 system switcher, scaler, mic mixer, audio DSP, amplifier, and control system</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [2]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Onboard AirMedia® gateway enables wireless BYOD presentation capability [1]</li><li>Built-in H.264 streaming video decoder [3]</li><li>Provides matrix signal routing for up to 9 video sources and 4 displays</li><li>Handles video resolutions up to 4K DCI and Ultra HD</li><li>Includes HDMI®, DM 8G+®, and balanced stereo analog audio inputs</li><li>Also supports Dual-Mode DisplayPort, DVI, and HDBaseT® sources [4]</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>HDCP 2.2 compliant</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes built-in 6-channel gated microphone mixing with DSP</li><li>Provides two HDMI and two DM 8G+ (HDBaseT compatible) outputs</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [7]</li><li>HDBaseT Certified — Enables direct connection to other HDBaseT certified equipment</li><li>Features an independent, high-performance 4K scaler at each HDMI output</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion [5]</li><li>Provides three balanced stereo audio outputs, each with independent mixer and DSP</li><li>Provides two additional audio mixes, either of which is selectable at any digital output</li><li>Features a built-in amplifier, selectable for 25W/Ch. @ 8Ω stereo or 50W @ 70/100 Volts mono</li><li>Enables analog-to-HDMI audio embedding and de-embedding</li><li>Enables USB signal routing via DM® transmitters and receivers or USB-EXT-DM series extenders [9]</li><li>Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via external RC-5 compatible IR receiver [6]</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Control Subnet — provides a dedicated local network for Crestron devices</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Content LAN port allows streaming and AirMedia traffic to be isolated on a secondary network</li><li>Includes front panel controls for basic configuration, diagnostics, and signal routing</li><li>Includes customizable front panel label strips and LCD display</li><li>Allows advanced setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM+ and HDBaseT PoE+ powered devices [8]</li><li>3-space 19-inch rack-mountable</li></ul> <p>1. To enable the onboard AirMedia gateway requires the purchase of one SW-DMPS3-AIRMEDIA license.  To purchase the DMPS3-4K-350-C with AirMedia pre-activated (no license required), see model DMPS3-4K-350-C-AIRMEDIA. Wireless presentation using AirMedia requires an external wireless access point (not included). A wired Ethernet connection may also be used. AirMedia network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port. Performance quality for full-motion video content is dependent upon network performance and sending device performance. AirMedia support in the DMPS3-4K-350-C includes the same essential functionality as the AM-101 AirMedia Presentation Gateway with the exclusion of quad view, moderator mode, and remote view.<br>2. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: http://www.crestron.com/avframework.<br>3. The streaming and AirMedia inputs are mutually exclusive. Only one or the other can be used at one time. Streaming network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The HDMI outputs do not pass 3D signals. On these outputs, 3D signals are automatically converted to 2D, then scaled and output as 2D. 3D signals can be passed through the DM 8G+ outputs.<br>6. Item(s) sold separately.<br>7. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum DM 8G+ Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>8. Enabling PoDM and PoE power sourcing requires an external power supply, model PW-4830DUS or DM-PSU-3X8-RPS, sold separately. Due to the inherent power loss that occurs over CATx cable, a maximum of 25.5 Watts is delivered at each PoDM+ or HDBaseT PoE+ powered device. Be aware that the CONTROL SUBNET port is limited to regular PoE (Class 0-3), which delivers a maximum of 12.95 Watts to the powered device. Any wiring that is connected to a PoDM or PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.<br>9. Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. The USB ports onboard the DMPS3-4K-350-C are not usable for USB signal routing. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.<br>10. License required. The DMPS3-4K-350-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.</p>

<p>The MB-SR50N EFEKT system is used for the construction of lightweight curtain walls of a hanging and filling type as well as roofs, skylights and other spatial constructions. Its supporting structure is based on a modern and tried-and-tested mullion and transom aluminium system MB-SR50N, which provides a wide range of profiles to choose from and the possibility of selecting sections so that the surface of mullions and transoms is flush with the internal side of façade, and thus its aesthetic joint with development elements inside the building is ensured. It also ensures compatibility with other constructions based on the wide range of products offered by Aluprof SA.</p> <p>MB-SR50N EFEKT is a façade that provides a uniform external appearance of a smooth glass wall divided by the structure of vertical and horizontal lines of 2 cm, thanks to the use of a special system for fixing panes to mullions and transoms. The gaps between glass fields of the façade are filled with a special silicon binder to ensure high tightness of the construction and enhance its insulation properties. As compared to the MB-SR50 EFEKT façade construction, which has already been popular on the market, the new solution has a number of new possibilities, in terms of technology as well as aesthetics.</p> <p>One of the basic advantages of the MB-SR50N EFEKT façade is the rich possibilities of glazing: the wide range of infills available in the catalogue includes one- or two-chamber glass, as well as non-transparent panels based on complex glass. The real novelty, and undoubtedly the hit of this type of façades, is the possibility of using glass units with a laminated pane. The precisely developed infill mounting system allows the flexible and economic adjustment to the technical requirements of a specific project – it is diverse depending on glass weight and includes solutions that enable  loads to be transferred from panes to profiles in such a manner that a load capacity of up to 450 kg can be obtained. We have two standard pane mounting variants at our disposal: with the use of continuous or point frame, which allows the manufacturing process and price to be optimised. Another big advantage of the system is the fact that it has recommendations from three world leading suppliers of constructional and weather-resistant silicones: Dow Corning, Sica and Tremco-Ilbruck, which not only enhance the prestige of this solution, but also ensure and guarantee the resistance and tightness of the construction, as well as easy access to technologies for glazing companies. In this system, the possibility of using silicon in different colours is also worthy of attention, as it significantly widens the spectrum for the creation of façade aesthetics.</p> <p>Façades made in the MB-SR50N EFEKT system have excellent utility parameters. Their use allows  not only the desired façade aesthetics to be obtained, but also very high thermal insulating power, which is, due to a strong, worldwide trend oriented at the limitation of the energy consumption of buildings, one of the main criteria for assessment of contemporary curtain walls.</p>

Self-closing wall-mounted basin faucet with push button and 190 mm long spout. This line of timer faucet with an advanced design is suitable for public or semi-public spaces that aim to differenciate themselves: hotels, VIP areas, etc. Ergonomic shapes of this collection avoid water splashes on the shelf and taken together comprise a highly integrated and elegant design. Due to the SOFT push button, this line is a user-friendly solution for elderly people and children.

Fire resistant sloped glazing EI30 and EI60 with attachment profiles FLEXIBLE, FAST, ECONOMICAL. The system offers great configuration flexibility to both planner and architect because of the unlimited choice in the sub-structures. Forster thermfix light makes it possible to mount a sealing system on commercially-available steel sub-structures. The system is characterized by basic and quick processing allowing improved economics. The advantages of the system • Controlled rain and condense water ducts through overlapping inner seals at the crossing and end-points of the rafters and mullions • Controlled ventilation and drainage of the glass rebates • Continuous screw mounting strip: free positioning of the fixing screws. • Functional outer weatherstripping system: two component seals in an aluminium press bar, crossing points sealed with inserts. • High degree of freedom of sizes and weights of filling elements as the glass carrier pads are laid out to meet the requirements of the specific type of construction. • Hidden or visible screw-fastened pressure strips can be used in the rafter and transom area. • Welded or clipped sub-structure • Combination with existing vertical facade system Forster thermfix light • High structural performance figures certified • Due to the use of a rebate space insulator, highly thermally insulated overhead glazing can be achieved

Sloped glazing with attachment profiles FLEXIBLE, FAST, ECONOMICAL. The system offers great configuration flexibility to both planner and architect because of the unlimited choice in the sub-structures. Forster thermfix light makes it possible to mount a sealing system on commercially-available steel and aluminium profiles as well as on wooden sub-structures. The system is characterized by basic and quick processing allowing improved economics. The advantages of the system • Controlled rain and condense water ducts through overlapping inner seals at the crossing and end-points of the rafters and mullions • Controlled ventilation and drainage of the glass rebates • Continuous screw mounting strip: free positioning of the fixing screws. • Functional outer weatherstripping system: two component seals in an aluminium press bar, crossing points sealed with inserts. • High degree of freedom of sizes and weights of filling elements as the glass carrier pads are laid out to meet the requirements of the specific type of construction. • Hidden or visible screw-fastened pressure strips can be used in the rafter and transom area. • Welded or clipped sub-structure • Combination with existing vertical facade system Forster thermfix light • High structural performance figures certified • Due to the use of a rebate space insulator, highly thermally insulated overhead glazing can be achieved

Ucrete is a unique HD Polyurethane resin floor with exceptional resistance to aggressive chemicals, heavy impact and temperatures up to 150°C. Ucrete MFAS-C provides a smooth protective static conductive floor finish suitable for applications in predominantly dry environments. It is used where there is a very high risk of explosion due to electrostatic discharge including where explosives, gases or solvents are handled. Ucrete MFAS-C meets the requirements of BS5958, EN1081, DIN51953, EN61340 and BS2050. BENEFITS • Durability: Ucrete Industrial Flooring has been widely used through-out industry for more than 40 years, many of the older floors are still in service. • Air quality: Very low VOC emissions. • Non-tainting, even during the application. • Fast application and curing: Specifications are available that enable Ucrete to be installed and cured within a 12 hour application window. • Temperature and thermal shock resistance. • Chemical resistance: Exceptional resistance to a wide range of chemical aggressors. • Impact resistance: Ucrete MFAS-C is able to withstand severe impact loads. • Substrate moisture tolerance: Can be applied directly onto 7 day old concrete, or old good quality concrete with high moisture contents without the use of special primers. • Cleaning and hygiene: Accredited for use in facilities operating HACCP based food safety systems. • Safe for workers, products and the environment.

<p>The collection Real is a series of ceiling and wall lights, the result of our desire to create a highly innovative refined product with a simple original form. Due to its design and indirect light, it can be used in many different enviroments.<br>Device for indirect light.</p>

<p>You can see exclusive freestanding wall-mounted washbasin. Atoll is the combination of asymmetric base with an extraordinary exotic wood on. To produce our  luxury washbasins we use beech wood and tinted in different colors. Finally luxury washbasin which is a gem in every bathroom. At the same time high-end quality and unique design provides luxury finish of our washbasins. Our washbasins are timelessly elegant, inimitable, natural warm. All these features are equally important for us. By buying our products you enter the elite group of people who appreciate the natural beauty of wood and the elegance of the finish, as well as the atmosphere of luxury that we offer. We aim to create exceptional products for people who are sensitive to art. Our clients will be thrilled due to sophisticated design and handcrafting that does not compromise on quality. Let our premium products inspire you to create the perfect ambience. For more information about price and availability of our luxury washbasins feel free to contact us.</p> <p></p>

<p>Alga Double is a large luxury washbasin with a light appearance. This is an enlarged version of the Alga model. You can appreciate at the same time delicate shape with subtle edges and comfortable usage. This luxury washbasin we made of beech wood covered with exotic wood on top.  At the same time high-end quality and unique design provides luxury finish of our washbasins. Our washbasins are timelessly elegant, inimitable, natural warm. All these features are equally important for us. By buying our products you enter the elite group of people who appreciate the natural beauty of wood and the elegance of the finish, as well as the atmosphere of luxury that we offer. We aim to create exceptional products for people who are sensitive to art. Our clients will be thrilled due to sophisticated design and handcrafting that does not compromise on quality. Let our premium products inspire you to create the perfect ambience. Luxury wooden washbasin Alga Double has been distinguished by the experts of the Industrial Design Institute as well designed and are therefore recommended for the jubilee 25th edition of the Good Design 2018 competition. Good Design is a competition for the best-designed products and services available on the Polish market and the first design award in Poland awarded for twenty-five years. For more information about price and availability of our luxury washbasins feel free to contact us.<br></p>

<p>Gull is a model of luxury washbasin combining the ergonomic shape and the delicate line of the drain in a classic design. This luxury washbasin we made of beech wood covered with exotic wood on top.  At the same time high-end quality and unique design provides luxury finish of our washbasins. Our washbasins are timelessly elegant, inimitable, natural warm. All these features are equally important for us. By buying our products you enter the elite group of people who appreciate the natural beauty of wood and the elegance of the finish, as well as the atmosphere of luxury that we offer. We aim to create exceptional products for people who are sensitive to art. Our clients will be thrilled due to sophisticated design and handcrafting that does not compromise on quality. Let our premium products inspire you to create the perfect ambience. For more information about price and availability of our luxury washbasins feel free to contact us.<br></p>

<p>Lagoon is a luxury washbasin presenting expressly soft edges made of beech wood covered with exotic wood on top. This is a beautiful performance in classic oval shape.  At the same time high-end quality and unique design provides luxury finish of our washbasins. Our washbasins are timelessly elegant, inimitable, natural warm. All these features are equally important for us. By buying our products you enter the elite group of people who appreciate the natural beauty of wood and the elegance of the finish, as well as the atmosphere of luxury that we offer. We aim to create exceptional products for people who are sensitive to art. Our clients will be thrilled due to sophisticated design and handcrafting that does not compromise on quality. Let our premium products inspire you to create the perfect ambience. For more information about price and availability of our luxury washbasins feel free to contact us.<br></p>

MAXIMUS MPX DELUX is an explosion-proof FULL HD PTZ camera which integrates new imaging and encoding technology for outdoor video surveillance, allowing recordings to be produced with incredibly bright and vivid colours both by day and by night. This camera is ideal for efficient video surveillance and control of processes in critical environments where the atmosphere is potentially explosive due to the presence of inflammable gases or dust, typical of the Oil&Gas, marine or industrial sectors.