Barrier system Zeppelin Rental GmbH https://www.zeppelin-rental.de/ https://bimobject.com

VARIO R 921 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

Stein Mugla White gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Murtal gesägt mit dunklen Fugen Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Salomon gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Travertin Light Medium gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Wandverblender Murtal gespalten Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Suspended plaster ceilings are usually made of plasterboard. In contrast, Metawell® jointless ceilings consist of aluminium sandwich panels, and because of the aluminium and copper used offer greater performance and a high response speed. The unusually lightweight support panel is very bending-resistant. Therefore, the grid dimension of the substructure can be double that of plasterboard panels. The advantages: greater flexibility with ceiling fixtures and a tighter meander layout. Metawell® panels offer many different edge finishes. They are provided at the butt joints with stop chamfers to ensure a perfectly levelled filling. Thanks to the extraordinarily flat surface, only the joints, not the entire panel area, need to be evened. Up to 110 W/sqm cooling performance (at 10 K under temperature). Additionally the product has an EPD (Environmental Product Declaration).

Mini-sized, electronically controlled instantaneous water heater for energy-efficient and comfortable hot water supply at a handwash basin (3,5 - 6,5 kW). • Touch key control panel or control vai IPad (CLAGE Smart Control) • optionally supplied with or without plug (3,5 kW) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • MCX Blue with single-lever washbasin tap • MBX Lumino with touch-free sensor tap

The run-of-the-mill frame ceilings in the standard format are seen (all too) often. In contrast Metawell® grid ceilings do not have standard sizes and show their advantages especially when used in large formats. Through visually offset installation panels and many options for appealing surface design, Metawell® modular ceilings and frame ceilings allow for the realisation of sophisticated design solutions. For panel sizes with more than 2 sqm modular ceilings are usually a cheaper alternative, especially when considering the installation costs. Additionally the product has an EPD (Environmental Product Declaration).

Aluminium sandwich panel for curtain wall facades with an overall thickness of 15 mm, weight only 6,8kg/m2, non visible fixing methods (riveting), wide colour range and different coating possibilities, perfect flatness also for big elements (max. 1460 x 6000 mm), fire rating acc. to DIN EN 13501: A2 - s1, d0 (non-combustible), 100% recyclable (without previous material separation), excellent corrosion protection, Environmental Product Declaration

Metawell® modular ceilings do not require visible rails or longitudinal frames. Instead, the individual ceiling elements are suspended directly from a concealed substructure. The ceiling elements can be pushed together within a few millimetres to each other. Passive installation strips are placed on the ceiling elements for subsequent installation of partition walls. If necessary, they can be removed easily and the wall can be erected without affecting the ceiling structure. Due to the big dimension of ​​the ceiling panels, the hydraulic connection of the panels is not necessary, which minimizes installation errors and installation times significantly. Through visually offset installation panels and many options for appealing surface design, Metawell® modular ceilings allow the realisation of sophisticated design solutions. Additionally the product has an EPD (Environmental Product Declaration).

Mini-sized, electronically controlled instantaneous water heater with single-lever washbasin tap for energy-efficient and comfortable hot water supply at a handwash basin (3,5 kW). • Touch key control panel or control vai IPad (CLAGE Smart Control) • optionally supplied with or without plug (3,5 kW) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • MCX SMARTRONIC® • MBX Lumino with touch-free sensor tap

Electronically controlled instantaneous water heater in compact size for energy-efficient and comfortable hot water supply at a kitchen sink (11/13,5 kW). • Precise outlet temperatures up to 60°C • Control via remote control (is included in the delivery) or via IPad (CLAGE Smart Control) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • CEX-U ELECTRONIC MPS® (with control-panel)

Ceiling sails hang from the base ceiling as single panels, or are combined into islands. In this way they can take on any contours, edge configurations and surface coatings. The radiant ceiling sail, a functional component of building technology, becomes a custom design element. Compared to enclosed ceilings, the open structure of ceiling sails offers clear advantages: greater specific performance, better accessibility, simpler assembly and lower investment costs. Metawell® radiant islands made of aluminium sandwich panels improve the room acoustics without reducing the cooling and heating efficiency of building structure core-tempered ceilings. Moreover, performance deficiencies can be compensated specifically. Additionally the product has an EPD (Environmental Product Declaration).

Electronically controlled instantaneous water heater in compact size for energy-efficient and comfortable hot water supply at a kitchen sink (11/13,5 kW). • Precise outlet temperatures up to 60°C • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • CFX-U FUNKTRONIC MPS® (remote control)

Aluminium sandwich panel for curtain wall facades with an overall thickness of 10 mm, weight only 5.7 kg/m2, non visible fixing methods (Glueing , Riveting), wide colour range and different coating possibilites, perfect flatness also for big elements (max. 1470 x 6000 mm), building inspectorate approval: Z-33.2-889 (DIBt Germany), fire rating acc. to DIN EN 13501: B - s2, d0, 100% recyclable (without previous material separation), excellent corrosion protection, Environmental Product Declaration

Electronically controlled instantaneous water heater for energy-efficient and comfortable hot water supply for singlepoint or multipoint use e.g. bath, shower, sink or wash basin (18-27 kW). • Precise outlet temperatures up to 60°C • Control via remote control • display shows the set temperature • suitable for pre-wall installation • Energy efficiency class A (from Sept. 2015) • DSX SERVOTRONIC MPS® (Fully electronically controlled, multifunctional display) • DCX ELECTRONIC MPS® (electronically controlled, with single key control panel)

Electronically controlled instantaneous water heater for energy-efficient and comfortable hot water supply for singlepoint or multipoint use e.g. bath, shower, sink or wash basin (18-27 kW). • Easy to use single-key-control pannel for the setting of the five possible outlet temperatures of 35 °C, 38 °C, 42 °C, 48 °C and 55 °C • suitable for pre-wall installation • Energy efficiency class A (from Sept. 2015) • DSX SERVOTRONIC MPS® (electronically controlled, multifunctional display) • DEX ELECTRONIC MPS® (electronically controlled, with control panel)

Mini-sized, electronically controlled instantaneous water heater with touch-free sensor tap for energy-efficient and comfortable hot water supply at a handwash basin (3,5/ 6,5 kW). • The maximum power of the instantaneous water heater will be set by a lever at the tap • optionally supplied with or without plug (3,5 kW) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • MCX Blue with single-lever washbasin tap • MCX SMARTRONIC®

Fully electronically controlled instantaneous water heater for energy-efficient and comfortable hot water supply for singlepoint or multipoint use e.g. bath, shower, sink or wash basin (18-27 kW). • Precise outlet temperatures up to 60°C • Control via remote control (is included in the delivery) or via IPad (CLAGE Smart Control) • coloured illuminated multifunctional display shows the set temperature and the energy consumption • suitable for pre-wall installation • Energy efficiency class A (from Sept. 2015) • DEX ELECTRONIC MPS® (electronically controlled, with control panel) • DCX ELECTRONIC MPS® (electronically controlled, with single key control panel)

System Förstärkningsregel s450 - Classic Board är ett välbeprövat system när det kommer till t ex höga väggar, väggar med extra höga stabilitetsgrav/bärande väggar, infästning av tunga dörrar samt ovanför glaspartier i exempelvis korridorväggar. Beakta at

The OnLevel TL-3010 – system competence at its very best, with fascinating and stylish design, durable quality and uncompromising safety coming together. Discover the possibilities of the TL-3010. This aluminium glass profile is designed for top mounting and is available in the following finishes: Raw, Anodised(close to EV1), Stainless Steel Look and RAL-Colour Coated. With its standard lengths of 2500mm and 5000mm, its ease of installation when combined with the OnLevel Flex-Fit or OnLevel Fix-Fit system, and its many different finishes, the TL-3010 is the system for a wide variety of project solutions.

Baier sliding shutters represent the most agreeable form of protection. Against light and adverse weather. In every material, every size, every colour. Design which has a moving effect. They set trends and move with the times. And yet they are timeless. The individual design possibilities will fill you ith inspiration. Our professional planning, manufacture and assembly will give you the required support and security. Design with a whiff of luxury. Comfort which creates a sense of delight. Drive technology developed specially by us and subjected to long-term tests provides optimum convenience and acceptability. Here even environmentally friendly and cost-saving solar energy can be used. In addition to the design, sliding shutters offers perfect shade technology which confidently defies adverse weather conditions and windy sunny days. If desired, they automatically follow the course of the sun – two important arguments when they are used, for example in clinics, industrial buildings, public buildings and sports centres. And, furthermore, you increase protection against undesired intruders. Baier sliding shutter fittings know no limits when it is a question of implementing individual ideas. Whether single-leaf or double-leaf or in telescopic form. No limits in color, size and using different materials. Wood, aluminum slats, aluminium sheets, expanded metals, composite fibre plates and printed glass are only a small selection here.

Baier sliding windows are used whenever one seeks an increase in comfort, aesthetics, and functionality. Functionality that moves. Baier sliding windows offer flexibility and the maximum level of security. The windows’ developments allow for the necessary comfort and its “automatic commercial success”. Baier measures up to all requirements. It doesn’t matter whether Baier is furnishing a network of bakeries with new, practical, and cost-effective sliding windows or fulfilling the specific wishes of a private homeowner. The entire expert knowledge of our metal construction lies in the development of innovative sliding windows, no matter what size. We also pay equal attention to individuality, ease of cleaning, and safety. Along with electrical automatic drivers, our experts also design a patented anti-drop device that would become effective if the carrier wire ever broke. But, a problem like that is out of the question, and you have our dependable maintenance service to thank for that. You can trust us in moving situations. [LIST] Ergonomic sliding windows for commercial use, such as for sidewalk sale Elegant special solutions for private living area Horizontal and vertical constructions Comfortable service, manual, at the push of a button or motion sensor For outside and inside Patented security system Made to measure in all desired sizes Available in all desired colors Made with shatterproof and insulating glass [/LIST]

Baier sliding shutters represent the most agreeable form of protection. Against light and adverse weather. In every material, every size, every colour. Design which has a moving effect. They set trends and move with the times. And yet they are timeless. The individual design possibilities will fill you ith inspiration. Our professional planning, manufacture and assembly will give you the required support and security. Design with a whiff of luxury. Comfort which creates a sense of delight. Drive technology developed specially by us and subjected to long-term tests provides optimum convenience and acceptability. Here even environmentally friendly and cost-saving solar energy can be used. In addition to the design, sliding shutters offers perfect shade technology which confidently defies adverse weather conditions and windy sunny days. If desired, they automatically follow the course of the sun – two important arguments when they are used, for example in clinics, industrial buildings, public buildings and sports centres. And, furthermore, you increase protection against undesired intruders. Baier sliding shutter fittings know no limits when it is a question of implementing individual ideas. Whether single-leaf or double-leaf or in telescopic form. No limits in color, size and using different materials. Wood, aluminum slats, aluminium sheets, expanded metals, composite fibre plates and printed glass are only a small selection here.

Baier sliding shutters represent the most agreeable form of protection. Against light and adverse weather. In every material, every size, every colour. Design which has a moving effect. They set trends and move with the times. And yet they are timeless. The individual design possibilities will fill you ith inspiration. Our professional planning, manufacture and assembly will give you the required support and security. Design with a whiff of luxury. Comfort which creates a sense of delight. Drive technology developed specially by us and subjected to long-term tests provides optimum convenience and acceptability. Here even environmentally friendly and cost-saving solar energy can be used. In addition to the design, sliding shutters offers perfect shade technology which confidently defies adverse weather conditions and windy sunny days. If desired, they automatically follow the course of the sun – two important arguments when they are used, for example in clinics, industrial buildings, public buildings and sports centres. And, furthermore, you increase protection against undesired intruders. Baier sliding shutter fittings know no limits when it is a question of implementing individual ideas. Whether single-leaf or double-leaf or in telescopic form. No limits in color, size and using different materials. Wood, aluminum slats, aluminium sheets, expanded metals, composite fibre plates and printed glass are only a small selection here.

Baier sliding shutters represent the most agreeable form of protection. Against light and adverse weather. In every material, every size, every colour. Design which has a moving effect. They set trends and move with the times. And yet they are timeless. The individual design possibilities will fill you ith inspiration. Our professional planning, manufacture and assembly will give you the required support and security. Design with a whiff of luxury. Comfort which creates a sense of delight. Drive technology developed specially by us and subjected to long-term tests provides optimum convenience and acceptability. Here even environmentally friendly and cost-saving solar energy can be used. In addition to the design, sliding shutters offers perfect shade technology which confidently defies adverse weather conditions and windy sunny days. If desired, they automatically follow the course of the sun – two important arguments when they are used, for example in clinics, industrial buildings, public buildings and sports centres. And, furthermore, you increase protection against undesired intruders. Baier sliding shutter fittings know no limits when it is a question of implementing individual ideas. Whether single-leaf or double-leaf or in telescopic form. No limits in color, size and using different materials. Wood, aluminum slats, aluminium sheets, expanded metals, composite fibre plates and printed glass are only a small selection here.

Baier sliding shutters represent the most agreeable form of protection. Against light and adverse weather. In every material, every size, every colour. Design which has a moving effect. They set trends and move with the times. And yet they are timeless. The individual design possibilities will fill you ith inspiration. Our professional planning, manufacture and assembly will give you the required support and security. Design with a whiff of luxury. Comfort which creates a sense of delight. Drive technology developed specially by us and subjected to long-term tests provides optimum convenience and acceptability. Here even environmentally friendly and cost-saving solar energy can be used. In addition to the design, sliding shutters offers perfect shade technology which confidently defies adverse weather conditions and windy sunny days. If desired, they automatically follow the course of the sun – two important arguments when they are used, for example in clinics, industrial buildings, public buildings and sports centres. And, furthermore, you increase protection against undesired intruders. Baier sliding shutter fittings know no limits when it is a question of implementing individual ideas. Whether single-leaf or double-leaf or in telescopic form. No limits in color, size and using different materials. Wood, aluminum slats, aluminium sheets, expanded metals, composite fibre plates and printed glass are only a small selection here.

Baier sliding shutters represent the most agreeable form of protection. Against light and adverse weather. In every material, every size, every colour. Design which has a moving effect. They set trends and move with the times. And yet they are timeless. The individual design possibilities will fill you ith inspiration. Our professional planning, manufacture and assembly will give you the required support and security. Design with a whiff of luxury. Comfort which creates a sense of delight. Drive technology developed specially by us and subjected to long-term tests provides optimum convenience and acceptability. Here even environmentally friendly and cost-saving solar energy can be used. In addition to the design, sliding shutters offers perfect shade technology which confidently defies adverse weather conditions and windy sunny days. If desired, they automatically follow the course of the sun – two important arguments when they are used, for example in clinics, industrial buildings, public buildings and sports centres. And, furthermore, you increase protection against undesired intruders. Baier sliding shutter fittings know no limits when it is a question of implementing individual ideas. Whether single-leaf or double-leaf or in telescopic form. No limits in color, size and using different materials. Wood, aluminum slats, aluminium sheets, expanded metals, composite fibre plates and printed glass are only a small selection here.

Due to a force of 400 N in a very compact housing of just 35 x 24 mm (W x H), KS4 chain drives are currently the most powerful NSHEV drives of this class in the international market. The new and unique, on both sides mounted connector solution allow a series connection of up to three drives and a locking drive. The direct mounting without consoles as well as the M-COM for self-learning configuration in multi-drive systems greatly simplify the installation. The integrated microprocessor can communicate via data bus with control units of AUMÜLLER. In the context of modern façade automation systems, different situational speeds and forces can thus be driven. [LIST] Electronic speed control for smooth motor running Low noise due to vibration-bearing motor Suitable for surface mounted drives and concealed fitting within profiles Universal brackets and casement brackets for all common profile systems Sidebow roller chain of high-quality stainless steel with recessed rivets heads, for large opening angles with the smallest possible bending radii Chain completely retracts into the housing to ease profile integrated mounting of the drives Programmable feedback contact for end positions "CLOSED" or "OPEN" Two-sided connector for connecting cable, protected against polarity reversal M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation Z-version: programmable feedback limit position “OPEN” or “CLOSE” Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Reversing the direction in overload cut-off during the shift Rebate control M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

AUMÜLLER folding arm drives have a attractive, rectangular aluminium housing and a latterally positioned folding arm. The folding arm is approximately as long as the housing. When closed, the arm lie flat against the housing. The opening angle is restricted to about 93°. The opening time is about 45 seconds. The mircoprocessor controlled cut-off switch and the motor gear unit are contained into the housing. The integrated microprocessor regulates the drive force by means of a electronic positioning encoder in relation to the stroke length. The soft-start and soft-stop both protect the window drive against overload, and the opening casement as well as the attachment elements against premature wear. The integrated contact can be programmed for return contacts or onward signal transmission. The FTA drives have been developed for installation at the side closing edge of side-hung windows. They are however also used on doors which are opened automatically in the event of a fire to allow the inlet of fresh air, and in normal operation can still be opened easily by means of the latch. The opening angle of the side-hung window or the doors is determined by the distance between the pivot points of the folding arm and the hinges. When used on doors as an airflow opening, the potential-free contact in the window drive is used for control of an electric door-opener or a bolt lock. Various easy-to-install accessories are available for the convenient installation of the drive.

The OnLevel TL-3011 – system competence at its very best, with fascinating and stylish design, durable quality and uncompromising safety coming together. Discover the possibilities of the TL-3011. This aluminium glass profile is designed for side mounting and is available in the following finishes: Raw, Anodised(close to EV1), Stainless Steel Look and RAL-Colour Coated. With its standard lengths of 2500mm and 5000mm, its ease of installation when combined with the OnLevel Flex-Fit or OnLevel Fix-Fit system, and its many different finishes, the TL-3011 is the system for a wide variety of project solutions.

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Reversing the direction in overload cut-off during the shift Rebate control M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation TWIN- or D-type version with 2 chains and double force Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Rebate control Reversing the direction in overload cut-off during the shift M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation TWIN- or D-type version with 2 chains and double force Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Reversing the direction in overload cut-off during the shift Rebate control M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

The OnLevel TL-6010 – system competence at its very best, with fascinating and stylish design, durable quality and uncompromising safety coming together. Discover the possibilities of the TL-6010. This aluminium glass profile is designed for top mounting and is available in the following finishes: Raw, Anodised(close to EV1), Stainless Steel Look and RAL-Colour Coated. With its standard lengths of 2500mm and 5000mm, its ease of installation when combined with the OnLevel Flex-Fit or OnLevel Fix-Fit system, and its many different finishes, the TL-6010 is the system for a wide variety of project solutions.

The OnLevel TL-6011 – system competence at its very best, with fascinating and stylish design, durable quality and uncompromising safety coming together. Discover the possibilities of the TL-6011. This aluminium glass profile is designed for side mounting and is available in the following finishes: Raw, Anodised(close to EV1), Stainless Steel Look and RAL-Colour Coated. With its standard lengths of 2500mm and 5000mm, its ease of installation when combined with the OnLevel Flex-Fit or OnLevel Fix-Fit system, and its many different finishes, the TL-6011 is the system for a wide variety of project solutions.

The first facade system to be classified with European Technical Approval Fire Protection Class A, Alprotect Nova combines unique patented carbon technology and nano-hybrid binders, resulting in a mineral wool external wall insulation system that sets new standards in terms of protection and durability. The system formulations can also be applied with light reflectance values as low as 5, ensuring most shades of colour including dark ones and even black can be used successfully for the façades finish.

Alprotect Carbon is the first external wall insulation system to offer unique carbon fibre technology. Ensuring maximum resistance to mechanical stress (up to 60 joules) and improved thermal performance, Alprotect Carbon provides extreme durability and versatility to modern facade design. This slim-line patented system achieves enormous stability and unrivalled impact strength.

Basic is the primary external wall insulation system in the range. Incorporating expanded polystyrene insulation, it is a high performance, fully acrylic or mineral based thin coat rendered facade system. It is ideal for the refurbishment of solid wall constructions, providing an easy to apply solution to effectively insulate the building.

A thick coat, EPS-insulation, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Offering clay slips in every conceivable colour and shade, collection alsecco ensures creativity for your next project. Alsecco has the capacity and expertise to source exactly the right brick for your specification, with the added advantage of being able to offer the complete system solution for your façade. Clay slips are either extruded as purpose made slips or the chosen brick is cut to around 15mm to form the slip. Either way, once the slips are pointed they have the same appearance a regular masonry, offering huge advantages.

The Alprotect Quattro external wall insulation system is extremely resistant to mechanical stress, offers high thermal performance and provides the ultimate protection against soiling and algae and fungal growth. In addition, highly elastic organic components guarantee high impact resistance and reliable crack bridging properties.

Ecomin is the primary external wall insulation system incorporating mineral wool. It is a thin coat render system with high levels of flexibility, ideal where inconsistencies or irregularities in the substrate occur. This system is ideal for solid wall constructions, providing an easy to apply solution to effectively insulate the building.

A thick coat, EPS-insulation, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Collection alsecco also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certain projects only stone is the option due to planning restrictions or just to create the architect’s vision. Alsecco can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

A thick coat, mineral wool, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Offering clay slips in every conceivable colour and shade, collection alsecco ensures creativity for your next project. Alsecco has the capacity and expertise to source exactly the right brick for your specification, with the added advantage of being able to offer the complete system solution for your façade. Clay slips are either extruded as purpose made slips or the chosen brick is cut to around 15mm to form the slip. Either way, once the slips are pointed they have the same appearance a regular masonry, offering huge advantages.

A thick coat, mineral wool, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Collection alsecco also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certainprojects only stone is the option due to planning restrictions or just to create the architect’s vision. Alsecco can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

Offering outstanding product properties including lightweight flexible application and a natural brick appearance, alsecco acrylic brick slips offer infinite design possibilities. Manufactured from high quality raw materials, the handcrafted acrylic slips ensure a versatile, impressive and durable facade for your next project. All system components are carefully matched, offer the highest level of technical reliability and are fully compatable with alsecco's facade systems.

Offering outstanding product properties including lightweight flexible application and a natural brick appearance, alsecco acrylic brick slips offer infinite design possibilities.Manufactured from high quality raw materials, the handcrafted acrylic slips ensure a versatile, impressive and durable facade for your next project. All system components are carefully matched, offer the highest level of technical reliability and are fully compatable with alsecco's facade systems.

Carbon is the first external wall insulation system to offer unique carbon fibre technology. Ensuring maximum resistance to mechanical stress (up to 60 joules) and improved thermal performance, Carbon provides extreme durability and versatility to modern facade design. This slim-line patented system achieves enormous stability and unrivalled impact strength

Best performance for facade insulation with thin insulation boards: Just 10 cm thick with a Lambda of 0.024 W/mK the Dalmatiner-Fassadendämmplatte S 024 allows to achieve the strict stipulations of the relevant German energy-saving regulation “EnEV 2009”: High insulating performance combined with a slimline wall structure facilitates attractive facade designs.Unattractive small window holes - caused by thick insulation boards to avoid thermal bridges - are quite back numbers. Details of joints to attached elements are easy and cost-efficient to realise due to the slim insulation board.

The first facade system to be classified with European Technical Approval Fire Protection Class A, Carbon Extra combines unique patented carbon technology and nano-hybrid binders, resulting in a mineral wool external wall insulation system that sets new standards in terms of protection and durability. The system formulations can also be applied with light reflectance values as low as 5, ensuring most shades of colour including dark ones and even black can be used successfully for the façades finish.

Pro Extra is the primary external wall insulation system incorporating mineral wool. It is a thin coat render system with high levels of flexibility, ideal where inconsistencies or irregularities in the substrate occur. This system is ideal for solid wall constructions, providing an easy to apply solution to effectively insulate the building.

Pro Mineralic is the primary external wall insulation system in the range. Incorporating expanded polystyrene insulation, it is a high performance, fully acrylic or mineral based thin coat rendered facade system. It is ideal for the refurbishment of solid wall constructions, providing an easy to apply solution to effectively insulate the building.

The Pro Organic external wall insulation system is extremely resistant to mechanical stress, offers high thermal performance and provides the ultimate protection against soiling and algae and fungal growth. In addition, highly elastic organic components guarantee high impact resistance and reliable crack bridging properties.

A thick coat, EPS-insulation, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Offering clay slips in every conceivable colour and shade, collection ensures creativity for your next project. Caparol has the capacity and expertise to source exactly the right brick for your specification, with the added advantage of being able to offer the complete system solution for your façade. Clay slips are either extruded as purpose made slips or the chosen brick is cut to around 15mm to form the slip. Either way, once the slips are pointed they have the same appearance a regular masonry, offering huge advantages.

A thick coat, mineral wool, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Offering clay slips in every conceivable colour and shade, collection ensures creativity for your next project. Caparol has the capacity and expertise to source exactly the right brick for your specification, with the added advantage of being able to offer the complete system solution for your façade. Clay slips are either extruded as purpose made slips or the chosen brick is cut to around 15mm to form the slip. Either way, once the slips are pointed they have the same appearance a regular masonry, offering huge advantages.

A thick coat, EPS-insulation, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. collection also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certain projects only stone is the option due to planning restrictions or just to create the architect’s vision. Caparol can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

A thick coat, mineral wool, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. collection also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certain projects only stone is the option due to planning restrictions or just to create the architect’s vision. Caparol can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

The OnLevel TL-3030 – system competence at its very best, with fascinating and stylish design, durable quality and uncompromising safety coming together. Discover the possibilities of the TL-3030. This aluminium glass profile is designed for top mounting and is available in the following finishes: Raw, Anodised(close to EV1), Stainless Steel Look and RAL-Colour Coated. With its standard lengths of 2500mm and 5000mm, its ease of installation when combined with the OnLevel Flex-Fit or OnLevel Fix-Fit system, and its many different finishes, the TL-3030 is the system for a wide variety of project solutions.

The OnLevel TL-3031 – system competence at its very best, with fascinating and stylish design, durable quality and uncompromising safety coming together. Discover the possibilities of the TL-3031. This aluminium glass profile is designed for side mounting and is available in the following finishes: Raw, Anodised(close to EV1), Stainless Steel Look and RAL-Colour Coated. With its standard lengths of 2500mm and 5000mm, its ease of installation when combined with the OnLevel Flex-Fit or OnLevel Fix-Fit system, and its many different finishes, the TL-3031 is the system for a wide variety of project solutions.

The OnLevel TL-5010 – system competence at its very best, with fascinating and stylish design, durable quality and uncompromising safety coming together. Discover the possibilities of the TL-5010. This aluminium glass profile is designed for top mounting and is available in the following finishes: Raw, Anodised(close to EV1), Stainless Steel Look and RAL-Colour Coated. With its standard lengths of 2500mm and 5000mm, its ease of installation when combined with the OnLevel Flex-Fit or OnLevel Fix-Fit system, and its many different finishes, the TL-3010 is the system for a wide variety of project solutions.

The OnLevel TL-6030 – system competence at its very best, with fascinating and stylish design, durable quality and uncompromising safety coming together. Discover the possibilities of the TL-6030. This aluminium glass profile is designed for top mounting and is available in the following finishes: Raw, Anodised(close to EV1), Stainless Steel Look and RAL-Colour Coated. With its standard lengths of 2500mm and 5000mm, its ease of installation when combined with the OnLevel Flex-Fit or OnLevel Fix-Fit system, and its many different finishes, the TL-6030 is the system for a wide variety of project solutions.

The OnLevel TL-6031 – system competence at its very best, with fascinating and stylish design, durable quality and uncompromising safety coming together. Discover the possibilities of the TL-6031. This aluminium glass profile is designed for side mounting and is available in the following finishes: Raw, Anodised(close to EV1), Stainless Steel Look and RAL-Colour Coated. With its standard lengths of 2500mm and 5000mm, its ease of installation when combined with the OnLevel Flex-Fit or OnLevel Fix-Fit system, and its many different finishes, the TL-3011 is the system for a wide variety of project solutions.

Metawell® acoustic elements are suitable for all rooms where the reverberation time impairs speech intelligibility. The elements have performed so well in acoustic tests that they have been classified as „Absorber class A“. The aluminium sandwich construction results in a high rigidity with an elegant and filigree appearance. With only 6 mm of visible edge, the element is very thin, but at the same time so rigid that the suspension ropes can be arranged far in the centre of the board and are therefore barely visible. With the included suspension ropes, the sail can be mounted in no time at all. With a weight of only 8.9 kg, the element is a lightweight under the acoustic elements. The elements are delivered in individual stackable cardboard packaging. Due to the stable construction of the element, it cannot break even during transport and installation. The element is delivered with a high-quality surface in the color RAL 9010 (pure white). If a renovation is required after years, the element can be easily covered; the acoustic values are still preserved. Even repeated overcoating is possible without performance loss. The acoustic elements are packed in quantities of 10 pieces on a disposable pallet.

Metawell® acoustic elements are suitable for all rooms where the reverberation time impairs speech intelligibility. The elements have performed so well in acoustic tests that they have been classified as „Absorber class A“. The aluminium sandwich construction results in a high rigidity with an elegant and filigree appearance. With only 6 mm of visible edge, the element is very thin, but at the same time so rigid that the suspension ropes can be arranged far in the centre of the board and are therefore barely visible. With the included suspension ropes, the sail can be mounted in no time at all. With a weight of only 8.9 kg, the element is a lightweight under the acoustic elements. The elements are delivered in individual stackable cardboard packaging. Due to the stable construction of the element, it cannot break even during transport and installation. The element is delivered with a high-quality surface in the color RAL 9010 (pure white). If a renovation is required after years, the element can be easily covered; the acoustic values are still preserved. Even repeated overcoating is possible without performance loss. The elements include a LED workplace lighting.

CARBONA R565 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

CLASSIC R 400 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

SALINA R 580 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VARIO R 931 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VARIO R 932 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VARIO R 941 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

Vascu R 752 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

Vascu_R 757 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VASCU R 764 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VASCU R 773 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VASCU R 775 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

Stein Kogler Carat gebürstet mit dunkler Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Kogler Carat gesägt mit heller Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Kogler Carat geschliffen mit heller Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Kogler Carat Gestrahlt mit dunkler Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Füme gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Luserna Gneis gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Marron Claro gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Monarch Rot gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Travertin Silver gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Travertin Walnuss gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Tümas Green gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Untersbgerer Naturell gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Verde Spluga gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Wandverblender Adria Grigio Beige Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Wandverblender Carat Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Carat gestrahlt mit hellen Fugen Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Cappucino gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Aurora Cremegold gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Carat Antik mit dunkler Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Carat gebürstet mit heller Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Carat Antik mit heller Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Carat gesägt mit dunkler Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Carat Geschliffen mit dunkler Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Colossea Crema gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Laaser Mamor gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Murtal Antik mit dunkler Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Murtal gestrahlt mit dunkler Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Shelly Beige gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Sirius Black gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Sirius Grey gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Sirius Silver gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Spider Brown gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Steinwalder Granit gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Steinwalder Granit gestrahlt Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Tauerngneis gesägt Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Tauerngneis gestrahlt Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Murtal gesägt mit hellen Fugen Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Murtal geschliffen mit dunklen Fugen Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Murtal geschliffen mit hellen Fugen Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Murtal gestrahlt mit hellen Fugen Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Muschelkalk Mediterran gebürstet Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Murtal antik mit heller Fuge Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Murtal gebürstet mit dunklen Fugen Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Stein Murtal gebürstet mit hellen Fugen Firma Josef Kogler Natursteinbruch GmbH - St.Urban in Kärnten (AT)

Fermacell Cement Bonded Boards - One Man Boards – Square Edge - Standard Boards – Square Edge - Tapered Edge Boards – Tapered On 2 Sides Fermacell Powerpanel H2O is a cement-bound light-weight construction panel with a sandwich structure and two-layer top layer reinforcement made of alkali-resistant glass lattice fabric. They offer a lot of advantages in highly humid wall and ceiling constructions. Areas of application envisaged: - interior applications for walls and ceilings, such as       - domestic wet rooms (e.g., bathrooms, showers)       - public areas (e.g., swimming pools, sanitation, wellness areas)       - commercial areas (for example, dairies, breweries, large kitchens) - External applications       - Undercover       - Suspended ventilated façade Product advantages: - Predestined for wet areas - Extremely stable and light - Easy to process - Easy to attach - Economical adhesive joints - surface filling For use in highly chemically stressed areas, please contact the technical consultants of Fermacell GmbH.

Biertischgarnitur "Susan" Die Holzelemente dieser edlen Biertischgarnitur wurden aus massiver Eiche gehobelt und mit einem eingefärbten Naturöl behandelt. Sie ergeben einen stilvollen Kontrast zu den Fußgestellen aus schwarz verzinktem Stahl. Die Garnitur besteht aus einem Tisch und zwei Bänken. Mit 3 Tischen und 4 Bänken ergibt sich eine quadratische Anordnung für 16 gesellige Personen. (Material mit Textur Eiche einstellen)

Laufrad "Pauli" Dieses flotte Gefährt für Kinder besteht aus einem weiß lackierten Multiplexrahmen, einer Lenkstange aus Edelstahl, Leder-Griffen und einem weich gepolsterten Leder-Sattel mit Ziernaht. Durch die robuste Bauweise ist Pauli für Drinnen und Draussen geeignet.

Beistelltisch "Jogy" Der Beistelltisch - das kleine Regal - oder der Edelhockel. Er steht auf allen vier Seiten gut. Acht unsichtbar verschweißte Aluminiumplatten verschmelzen zu einer leichten und transparenten Form. Erhältlich in zwei Varianten: ganz puristisch in weiß oder in anthrazit mit hochglanzpolierten Kanten

Schaukelstuhl "Helga" Diese fröhliche Schaukel ist in vier Farbvarianten erhältlich. Für kleinen Prinzessinnen gibt es den Minithron in rosa/weiß, für Jungs die Farbvariante in hellblau/weiß. Und für die Puristen: schneeweiß lackiert. Kreative Eltern und Kinder können den Stuhl aus unbehandeltem Muliplex nach Belieben selber gestalten. Helga wurde als 6-teiliges Stecksystem konstruiert, als Zusatz kann ein weiches Lammfell bei und bestellt werden.

Holzkatze "Serafina" Kennen Sie diese Genießerpose? Mit sanftem Schnurren und ausgiebigem Strecken verleiht die Katze ihrem Wohlgefühl Ausdruck. Genau wie unserer Holzmieze. Sie macht sich besonders gut auf Fensterbänken, darf aber auch in keinem Spielzeugzoo im Kinderzimmer fehlen. Aus unbehandeltem Ahorn ist sie frei von Schadstoffen und kann daher bedenkenlos gestreichelt und gekrault werden.

Hockerduo "'Steffi" Diese asymmetrisch geformten Edelhocker ergeben in bestimmter Anordnung zu zweit unterschiedliche Formen einer Bank oder zu viert einen quadratischen Tisch. Leuchtend rapsgelbe Innenflächen bilden einen starken Kontrast zu den anthrazitfarbenen Oberflächen. Die pulverbeschichteteten Stahlelemente sind absolut unempfindlich daher als Blickfang für drinnen und draußen geeignet.

Tischset "Jan" Ein 7-teiliges Würfelset als Sammelplatz für Tischkrimskrams mit vielerlei Einsätzen und umfangreichem Zubehör. Dekoriert den Tisch, ordnet Küchenutensilien und pimpt Fensterbänke und Wohnzimmertische auf. Die Oberflächen sind aus robuster, gebürsteter Eiche. Zum Set gehören eine Pfeffer- und Salzmühle sowei zwei Glasflaschen und eine weiße Blockkerze.

Accessoirehaken "Lilli" Diese bunten Vögelchen lieben Schmuck, Tücher und Accessoires. Anders als bei der diebischen Elster sind ihre Lieblingsstücke bei ihnen jedoch gut aufgehoben. Das Hakenset besteht aus zwei Vögeln unterschiedlicher Form und gleicher Farbe. Sie sind in pink, weiß und schwarz erhältlich. Durch eine fluoreszierende Leuchtfolie auf der Rückseite hinterlassen diese Vögel einen spannenden Farbschimmer auf hellen Rückwänden.

Holzhocker "Stevie" Dieser Rundhocker ist ein echter Naturbursche aus mindestens 100 - jährigem Eichenholz, der durch die Reduziertheit im Material und seine gestalterische Einfachheit besticht. Durch die Bearbeitung mit der Motorsäge und jede Menge Handarbeit wurde aus einem massiven Eichenstamm ein bequemes Unikat. Ausgestattet mit einer anthrazitfarbenen Filzauflage und einer grünen Trageschlaufe.

Tafeltisch "Reni" Mulitfunktional: Reni ist eine magnetische Schreibtafel, die durch vier Tischbeine blitzschnell zum individuell beschreibbaren Gästetisch wird. Einladen. Ausladen. Wegwischen. Wieder einladen. Kein Problem. Die Tischplatte aus pulverschichtetem Stahlblech besitzt mehrere Laschen, um sie bei Bedarf als Wandtafel aufzuhängen. Dafür können die Tischbeine leicht abgeschraubt und unsichtbar einghängt werden.

Kaufladen "Hannah": Lässt garantiert jedes Kinderherz höher schlagen: Der Kaufladen basiert auf einem modularen Stecksystem, das einen Aufbau ohne Werkzeug ermöglicht. Drei Fachböden in der Rückwand sowie zwei schräge Regalböden sind höhenverstellbar, Tafel und Theke sind beschreibbar. Zusammen mit einem integrierten Kleiderhaken und einem Geheimfach wird dieser Kaufladen zum Erlebnis.

Hockerduo "'Steffi" Diese asymmetrisch geformten Edelhocker ergeben in bestimmter Anordnung zu zweit unterschiedliche Formen einer Bank oder zu viert einen quadratischen Tisch. Leuchtend rapsgelbe Innenflächen bilden einen starken Kontrast zu den anthrazitfarbenen Oberflächen. Die pulverbeschichteteten Stahlelemente sind absolut unempfindlich daher als Blickfang für drinnen und draußen geeignet.

Kräutergarten "Käthe" Waschechte Flusssteine standen Modell für diesen formschönen, dreiteiligen Kräutergarten. Durch seine natürliche, organische Form und die schlichte Farbe passt der Kräutergarten in jede Küche. Schön arrangiert findet er auch auf einem schmalen 45er Schrank seinen Plazt. Jedes Set ist ein Unikat, das aus naturbelassenem Porzellan von der Hand gefertigt wird.

Aktuelle ArchiCARD-Bibliothek http://www.archicard.com

Kräutergarten "Käthe" Waschechte Flusssteine standen Modell für diesen formschönen, dreiteiligen Kräutergarten. Durch seine natürliche, organische Form und die schlichte Farbe passt der Kräutergarten in jede Küche. Schön arrangiert findet er auch auf einem schmalen 45er Schrank seinen Plazt. Jedes Set ist ein Unikat, das aus naturbelassenem Porzellan von der Hand gefertigt wird.

Garderobe "Role" Diese Garderobe besteht aus fünf konisch zulaufenden grasgrünen Riesenhalmen. Eine gebürstete Edelstahlplatte verleiht die nötige Bodenständigkeit, zum Set gehören ausserdem die passenden Haken und eine Konfektionsstange. Zu jeder Garderobe gehört auch eine Wandapplikation: Grüne Wiesenhalme in zwei Farbtönen zum individuellen Aufkleben auf die Wand.

Accessoirehaken "Lilli" Diese bunten Vögelchen lieben Schmuck, Tücher und Accessoires. Anders als bei der diebischen Elster sind ihre Lieblingsstücke bei ihnen jedoch gut aufgehoben. Das Hakenset besteht aus zwei Vögeln unterschiedlicher Form und gleicher Farbe. Sie sind in pink, weiß und schwarz erhältlich. Durch eine fluoreszierende Leuchtfolie auf der Rückseite hinterlassen diese Vögel einen spannenden Farbschimmer auf hellen Rückwänden.

Kräutergarten "Käthe" Waschechte Flusssteine standen Modell für diesen formschönen, dreiteiligen Kräutergarten. Durch seine natürliche, organische Form und die schlichte Farbe passt der Kräutergarten in jede Küche. Schön arrangiert findet er auch auf einem schmalen 45er Schrank seinen Plazt. Jedes Set ist ein Unikat, das aus naturbelassenem Porzellan von der Hand gefertigt wird.

Verhalten bei Unfällen, Aushang für den Unfallschutz überarbeitet Version aus ARCHICAD 16

Verhalten bei Unfällen, Aushang für den Brandschutz überarbeitet Version aus ARCHICAD 16